Posts by Gizmo_Ger

same here.

Quote from craigjones000

Hi guys, really new to all this so please bare with me.
I have followed all the instructions for how to install LE on my Mini M8S box and it seemed to work great. The LE logo came up when powering up using the toothpick method and i got going using kodi etc.
I then unplugged the USB drive from the box and LE has gone. I want to convert my box completely over to LE as i don't use the android features only kodi. Is there something I'm doing wrong or do i just simply have to save it to the internal memory??? Im not sure how to do this so any help would be great.
Cheers

thread-5556.html

You were booting LibreELEC from the USB, without your USB drive there was nothing to boot from except Android. Either keep the USB drive plugged in or install LibreELEC to the NAND according to the link above.
I personally would prefer the USB drive method - hazzle free and almost no difference between USB and NAND.

Quote from lrusak

remove the patches?

Duh! Stupid me... Patches got removed in the meantime

While trying to build from sources the process stops at applying aarch64 kodi patches (kodi-0003-EGLNativeTypeAmlogic-Enable-GUI-free_scale-when-framebuffer-size-is-less-than-output.patch)

patching file xbmc/windowing/egl/EGLNativeTypeAmlogic.cpp
Reversed (or previously applied) patch detected! Assume -R? [n]
Apply anyway? [n]
Skipping patch.
3 out of 3 hunks ignored -- saving rejects to file xbmc/windowing/egl/EGLNativeTypeAmlogic.cpp.rej
patching file xbmc/windowing/egl/EGLNativeTypeAmlogic.h
Hunk #1 FAILED at 53.
1 out of 1 hunk FAILED -- saving rejects to file xbmc/windowing/egl/EGLNativeTypeAmlogic.h.rej

I tried already to reset git to master but the problem remains.

Any ideas?

Pulled latest git and rebuild and the problem still remains. Right click once... Any other idea?

dmesg PTFI

LibreELECodroid:~ # ir-keytable
Found /sys/class/rc/rc0/ (/dev/input/event5) with:
Driver meson-ir, table rc-empty
Supported protocols: lirc rc-5 jvc sony nec sanyo mce-kbd rc-6
Enabled protocols: lirc
Name: meson-ir
bus: 25, vendor/product: 0000:0000, version: 0x0000
Repeat delay = 1000 ms, repeat period = 125 ms

I´m using a Odroid C2 Libreelec compiled from git sources and not sure when the problem first occured. After starting Libreelec the IR works fine; up, down, left. Using the right button only works once. After reboot everything is back - all the buttons work find, just the right button only once. Using the TV remote control via CEC it works fine, also with the iphone/android apps. Not sure where to start with resolving that problem. What kinda log would I look into? Any help is appreciated.

Quote from nickr

Not a debug log

05:55:01 T:139802558076992 NOTICE: Disabled debug logging due to GUI setting. Level 0.

ouch - mea culpa. Hope this one is more helpful

Quote from nickr

Debug log?

IdRC

Quote from lrusak

Which version? Have you tried the latest alpha build?

Yes, installed the latest LibreELEC-Generic.x86_64-7.90.005.

The prior Asus S1-AT5NM10E it worked in this constellation out of the box. I was able to switch in audio settings to HDMI audio out and also audio passthrough.

I just switched the hardware to a Zotac CI520 and I have no option to set the sound out to HDMI.

LibreELEC:~ # aplay -l
**** List of PLAYBACK Hardware Devices ****
card 2: PCH [HDA Intel PCH], device 0: ALC892 Analog [ALC892 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: PCH [HDA Intel PCH], device 1: ALC892 Digital [ALC892 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0

I´ve tried already switching the HDMI cable but no luck. I´m using a fresh install of Generic X86_64 build.
Any help would be much appreciated.

I just switched from OpenELEC to LibreELEC and installed from scratch. While trying to install Simple IPTV from LibreELEC repo I keep getting "Can´t connect to repository". Is it currently down? I am using a dev build compiled from source -> LibreELEC-Generic.x86_64-8.0-devel-20160423072537-r22825-gf1aef79