you can load this details?id=jackpal.androidterm on to android, then type "reboot update" in the terminal, then IF you have the correct dtb on a coreelec usb, it should reboot to coreelec

Alternatively, press the menu button several times quickly, while plugging in the power.

If, it still doesn't boot to libreelec try another dtb.

I didn't know, that Libre did versions for this box, I would try Coreelec

you can't just load any firmware, try over at freaktab forums

there is this [8.2.4.1] LibreELEC Kodi Krypton - S905 & S912 devices

but I expect you already know because you will have searched the forum

Or go to the Coreelec forums for a Leia version

Release CoreELEC 8.95.7 release · CoreELEC/CoreELEC · GitHub

try setting a fixed ip address for the one you want.

I have a TVh server & client with a Xbox tuner on a H96 Pro. Don't get 720.(coreelec

I also have a tvh server & client using a different usb tuner running on a celeron nuc. (libreelec)

I will admit, HD channels don't always work well (i'm in the uk)

But I put that down to the aerial.

How about asking on the coreelec forum

Tvhead works for me on a H96 pro

read post 6 LE9.0 remote configs ir-keytable Amlogic devices

i found the card burn maker easier to use.

Make sure you have the correct rom

you would probably have more luck posting on the freaktab forum.

My Harmony powers my nuc on & off

I use the internal ir for my nuc, DN2820FYKH

I select Intel as manufacturer & DN2829FYKH as the model. this is on my 350, but its the same for the 650.

You can use the learn, function to add commands from your tv remote.

This is how i got tvhproxy working on my NUC

Install Docker.

ssh into your device

docker pull chvb/docker-tvhproxy

docker run -d \

-p 5004:5004/tcp \

-e TVH_URL="http://admin:[email protected]:9981" \

chvb/docker-tvhproxy:latest

admin is my user 1234 is my password

On the shield webpage, add ip address manually, followed by the port

eg 192.168.1.110:5004

Don't ask me any technical instructions,it was abit of trial & error. I know nothing about linux

reaad this LibreELEC 8.x images for additional dvb drivers

when it comes to command lines, I am lost.

I puttied into my device typed 'uname -r' command not recognised

I can't remember exactly, you need to install some drivers by Crazycat. You basically have to choose one, then try it. Hopefully crazycat will answer you.

I have one of these running Coreelec on a H96 Pro

Before you ask remote.conf repository

Create remote.conf from scratch

use a keyboard, after the initial setup you will have to get a remote conf file to get the remote working