Posts by belaid38

    If you don't mind, please try to check the launch of this version of the image with sheath SATO on the model Wetek. Download

    sdimage-SATO-201708281721-S9xxx.img.xz . Unzip. To record on the SD card. Download and add to the first section of the script s905_autoscript. Add the script "boot.ini". Rename the appropriate file of the dtb to the "dtb.img" (all available files are in the root, it is sufficient to rename). Try to start the system. I'm interested in the system start-up. If possible, it is advisable to check out a run from a USB drive.


    Яндекс.Диск

    After my experience within the system



    The internet works with cable access


    The videos work I tried the p360 and p720 and the sound sometimes works and sometimes does not


    4k works but the picture is too heavy


    libreelec addons do not work

    cucumber hardware acceleratior Does not appear



    You need to make a 4.12 Kernel at Krypton - libreelec 8

    The script "boot.ini" for model WETEK, which may partially replace the activation of the universal multi-boot (which uses a script s905_autoscript). The order of use. Burn image on SD card. Add the correct "dtb.img" in the root media. Add the script "boot.ini". To connect media to the TV box and turn the power on. Pay attention to the nuances. The script "boot.ini" only runs from the SD card, but the operating system (LE or Linux) can be recorded to any external media (SD card or USB flash drive). To start the system from USB stick to TV box must be connected to two media - SD card "boot.ini" and USB stick with the desired system (which uses the script s905_autoscript). If you need the system is recorded on the SD card, you can add the script "boot.ini" and to implement the recommendations that are prescribed for the system, for example , add correct dtb file. Pay attention to the use of the image LE from this thread, for Wetek need to pick up a working dtb file from the directory /dtb on the media (copy it to the root and rename to "dtb.img").


    Яндекс.Диск

    woow is work and boot in libreelec after add boot.ini


    thanx men

    I need the output of "printenv" and "help" (u-boot), is to write the correct "boot.ini".

    boot.ini from ubuntu 16.04 wetek2 iis work


    --------------------------------------------------------------------

    WETEK-UBOOT-CONFIG


    # Possible screen resolutions

    # Uncomment only a single Line! The line with setenv written.

    # At least one mode must be selected.


    # 480 Lines (720x480)

    # setenv m "480i60hz" # Interlaced 60Hz

    # setenv m "480i_rpt" # Interlaced for Rear Projection Televisions 60Hz

    # setenv m "480p60hz" # 480 Progressive 60Hz

    # setenv m "480p_rpt" # 480 Progressive for Rear Projection Televisions 60Hz


    # 576 Lines (720x576)

    # setenv m "576i50hz" # Interlaced 50Hz

    # setenv m "576i_rpt" # Interlaced for Rear Projection Televisions 50Hz

    # setenv m "576p50hz" # Progressive 50Hz

    # setenv m "576p_rpt" # Progressive for Rear Projection Televisions 50Hz


    # 720 Lines (1280x720)

    # setenv m "720p50hz" # 50Hz

    setenv m "720p60hz" # 60Hz


    # 1080 Lines (1920x1080)

    # setenv m "1080i60hz" # Interlaced 60Hz

    # setenv m "1080p60hz" # Progressive 60Hz

    # setenv m "1080i50hz" # Interlaced 50Hz

    # setenv m "1080p50hz" # Progressive 50Hz

    # setenv m "1080p24hz" # Progressive 24Hz


    # 4K (3840x2160)

    # setenv m "2160p30hz" # Progressive 30Hz

    # setenv m "2160p25hz" # Progressive 25Hz

    # setenv m "2160p24hz" # Progressive 24Hz

    # setenv m "smpte24hz" # Progressive 24Hz SMPTE

    # setenv m "2160p50hz" # Progressive 50Hz

    # setenv m "2160p60hz" # Progressive 60Hz

    # setenv m "2160p50hz420" # Progressive 50Hz with YCbCr 4:2:0 (Requires TV/Monitor that supports it)

    # setenv m "2160p60hz420" # Progressive 60Hz with YCbCr 4:2:0 (Requires TV/Monitor that supports it)


    ### VESA modes ###

    # setenv m "640x480p60hz"

    # setenv m "800x480p60hz"

    # setenv m "800x600p60hz"

    # setenv m "1024x600p60hz"

    # setenv m "1024x768p60hz"

    # setenv m "1280x800p60hz"

    # setenv m "1280x1024p60hz"

    # setenv m "1360x768p60hz"

    # setenv m "1440x900p60hz"

    # setenv m "1600x900p60hz"

    # setenv m "1680x1050p60hz"

    # setenv m "1600x1200p60hz"

    # setenv m "1920x1200p60hz"

    # setenv m "2560x1080p60hz"

    # setenv m "2560x1440p60hz"

    # setenv m "2560x1600p60hz"

    # setenv m "3440x1440p60hz"


    # HDMI BPP Mode

    setenv m_bpp "32"

    # setenv m_bpp "24"

    # setenv m_bpp "16"


    # HDMI DVI/VGA modes

    # Uncomment only a single Line! The line with setenv written.

    # At least one mode must be selected.

    # setenv vout "dvi"

    # setenv vout "vga"


    # HDMI HotPlug Detection control

    # Allows you to force HDMI thinking that the cable is connected.

    # true = HDMI will believe that cable is always connected

    # false = will let board/monitor negotiate the connection status

    setenv hpd "true"

    # setenv hpd "false"


    # Default Console Device Setting

    setenv condev "console=ttyS0,115200n8 console=tty0" # on both


    # Meson Timer

    # 1 - Meson Timer

    # 0 - Arch Timer

    # Using meson_timer improves the video playback whoever it breaks KVM (virtualization).

    # Using arch timer allows KVM/Virtualization to work however you'll experience poor video

    setenv mesontimer "1"


    # Server Mode (aka. No Graphics)

    # Setting nographics to 1 will disable all video subsystem

    # This mode is ideal of server type usage. (Saves ~300Mb of RAM)

    setenv nographics "0"


    ###########################################


    # Boot Arguments

    setenv bootargs "root=UUID=e139ce78-9841-40fe-8823-96a304a09859 rootwait ro ${condev} no_console_suspend hdmimode=${m} m_bpp=${m_bpp} vout=${vout} fsck.repair=yes net.ifnames=0 elevator=noop disablehpd=${hpd}"


    # Mac

    if keyman init 0x1234; then if keyman read mac ${loadaddr} str; then setenv bootargs ${bootargs} mac=${mac}; fi; fi


    # Booting


    setenv loadaddr "0x11000000"

    setenv dtb_loadaddr "0x1000000"

    setenv initrd_loadaddr "0x13000000"


    fatload mmc 0:1 ${initrd_loadaddr} uInitrd

    fatload mmc 0:1 ${loadaddr} Image

    if test "${boxname}" = "Hub"; then fatload mmc 0:1 ${dtb_loadaddr} meson64_wetekhub.dtb; fi

    if test "${boxname}" = "Play2"; then fatload mmc 0:1 ${dtb_loadaddr} meson64_wetekplay2.dtb; fi

    if test "${boxname}" = "Play2s"; then fatload mmc 0:1 ${dtb_loadaddr} meson64_wetekplay2s.dtb; fi

    if test "${boxname}" = "PlayPlus"; then fatload mmc 0:1 ${dtb_loadaddr} meson64_wetekplayplus.dtb; fi

    fdt addr ${dtb_loadaddr}


    if test "${mesontimer}" = "0"; then fdt rm /meson_timer; fdt rm /cpus/[email protected]/timer; fdt rm /cpus/[email protected]/timer; fdt rm /cpus/[email protected]/timer; fdt rm /cpus/[email protected]/timer; fi

    if test "${mesontimer}" = "1"; then fdt rm /timer; fi


    if test "${nographics}" = "1"; then fdt rm /reserved-memory; fdt rm /aocec; fi

    if test "${nographics}" = "1"; then fdt rm /meson-fb; fdt rm /amhdmitx; fdt rm /picdec; fdt rm /ppmgr; fi

    if test "${nographics}" = "1"; then fdt rm /meson-vout; fdt rm /mesonstream; fdt rm /meson-fb; fi

    if test "${nographics}" = "1"; then fdt rm /deinterlace; fdt rm /codec_mm; fi


    booti ${loadaddr} ${initrd_loadaddr} ${dtb_loadaddr}