GDPR-2 , I installed now new devel + new dtb on my wetek play 2 (sd card). Wifi works, adapters are visible in tvheadend with crazycat drivers selected but now is impossible to scan muxes on tvheadend (tested on tvh4.2 and 4.3 from LE repo) . If I press force scan in tvh webif options is nothing happens and in scan state is error
zbigzbig20 you need choose dvb driver for hauppauge Will scan channels
I
belaid38 zbigzbig20 new devel version for you to try here.
Some important notes before flashing for you guys and some others.
The kernel in this dev image has been changed from kszaq/8.2 to official LE/9.0 pre-alpha, this is a big change and something I have held off from changing to for a couple of reasons which are listed below.
If you have LE installed to internal this image will not boot as the partition layout in the DTB is different. You can still install to internal but you will have to boot from SD and then re-run the scripts and if you go back to another image then you will have to do the same again.
Devices with NAND will not be able to run LE from internal memory due to the LE kernel having no NAND driver.
There may be frame drops/skips with certain content however I can't say with 100% certainty that this will be the case because it has been some time since I last tested it.
DTB will require updating or your box will not boot however this should be done automatically as part of the upgrade process.
If flashing this image, I very HIGHLY recommend making a back up.
If your device boots following the upgrade then I expect this to run just as well as any other release, I make these notes just so you are forewarned. DO NOT complain, if your box goes bang!!
I tested this
-When you choose dvb driver for tbs (crazycat) after reboot wifi work . remote control not work . tuner dvb is found but no signal in tvh 4.2 and tvh 4.3 and vdr 2.3.x
-When you choose dvb driver for hauppauge after reboot wifi work . remote control work fine . tuner dvb is found and work fine channels and scan muxes work in tvh 4.2 and tvh 4.3 and vdr 2.3.x
belaid38 zbigzbig20 I built crazycat driver addon with old codesnake driver.
driver.dvb.crazycat-9.0.1.0.zip
Pls, verify WP2 tuner driver with GDPR-2 devel version.
afl1 i tested this and the result is the same as the previous problem
I think the problem is a conflict wifi and driver tuner wetekdvb crazycat dvb
As the brother said zbigzbig20
Yes I also tested this new dev build from today on my play2 and after enabled crazycat drivers wifi does not work and dvb tuner. When I enable le default driver wifi is ok but no adapters in tvh webif settings
Please try this and report back LibreELEC-S905.arm-9.0-devel-20180224131444-r28220-ga32a2d5ce.tar
hi GDPR-2 i tested this
wifi not work after rebout and wetekdvb not work after enable crazycat dvb
see me rabort
GDPR-2 fix codesnake is add in master libreelec
Commits · LibreELEC/LibreELEC.tv · GitHub
pls build devel . i need tested
GDPR-2 Can you tell the problem of tvh from tvh-dtv-scan-tables
I think it has been repaired today
tvheadend42: backport patch to fix jenkins · LibreELEC/LibreELEC.tv@b4b12d2 · GitHub
Merge pull request #2503 from CvH/9.0-tvh-jenkins-dvbscan · LibreELEC/LibreELEC.tv@462af23 · GitHub
LibreELEC.tv/tvheadend42-02-fix-dvbscan.patch at master · LibreELEC/LibreELEC.tv · GitHub
Please give us a new building with correction
hi GDPR-2 i tested 8.90.4 with wetek play 2 .
tvh after installed is not work .in listen web not work
hi GDPR-1 thanx for your build
i tested this leia 23 for my wetek play 2
1- The remote control response is slow
2- cpu used 50 - 70 %
3 - The version has become very fast and smooth better than before
4 - The video or with tvh dvb has become working with a mini-seamless background without cutting like libreelec 7 aarch64 but But sometimes the movement is slower when switching to Menu Due to high consumption cpu 50-90 %
Can you do a clean install? Burn on new SD card LE 8.90.3, upgrade to devel and then allow crazycat dvb addon drivers. Install TVH and let me know if the driver for internal dvb tuner is working.
afl1 I tested the way . Same problem first
Something wrong is with this dev build. When I trying to reboot le it stuck on black screen and I have to unplug power . Tvheadend is installed but does not want to connect .Prevous I had installed tvh 4.3 now I did update and it back to 4.2
Same with me
Unfortunately it doesn't.
Thank you. Hopefully this will be done soon
kszaq According to recent news I heard that it supports decoding video
hi balbes150
you need see Mainline Linux on Amlogic S905/S905X/S912 SoCs – 2018 Status Update
I need test build up the experience of recent developments. i have wetek play 2
hi GDPR-2 i tested 8.90.2 for wetek play2
after installe driver crazycat and reboot but tuner not found in tvheadend 
GDPR-1 i tested live tv dvb s2 with tvheadend
video channel is With some irritations
Release rb-leia22 · Raybuntu/LibreELEC.tv · GitHub
mediabuild aka crazycat was temporarily removed for WP2.
WOW is fast boot and speeder thanck you GDPR-1 and vdr is work
but Some remote buttons not work . i have wetek play2
