Posts by mray

mray · Flirc remote not working mray November 29, 2025 at 2:19 AM

flirc_util took some time but after 10 seconds:

Code

# flirc_util
[E] lib/libtransport/hid.c hid_recv_packet(217): Wrong response length = 0
[E] lib/libtransport/hid.c hid_recv_packet(218): hidapi: Success
[E] lib/libtransport/transport.c _recv_packet(127): _recv_packet: recv packet error = -1
[E] lib/libtransport/transport.c _dev_send_cmd(202): recv timeout
Error getting version
[W] lib/cmds.c handle_longopt(180): `version' doesn not take '--pretty' option
flirc_util version 8fa330dc8741f2014de7af7f0761abb35ddadb65 [8fa330d+]
Commands:
 delete         Delete next remote button flirc sees from saved database
 delete_index   Delete button at index displayed in `flirc_util settings`
 device_log     Displays the log on the device
 dfu            Kick in or out of Device Firmware Upgrade mode
 format         Remove all saved buttons from flirc
 help           Show this help. Also try `help <command>`
 interkey_delay set the interkey delay
 loadconfig     Load configuration file from disk to flirc
 loglevel       set the log level
 mode           Enable or disable a usb mode
 noise_canceler Noise canceler to prevent phantom presses
 normal         Put flirc in normal user mode
 profiles       enable or disable built in profiles
 reboot         Displays all the devices current settings
 record         Record infrared buttons and link them to HID keys
 record_api     Advanced button recording
 record_lp      Record a long pres key
 record_macro   Record a macro key
 rom_table      enable or disable a give rom table
 saveconfig     Save configuration file to disk
 script         run a command script
 sendir         Send a packet over the IR transmitter
 settings       Displays all the devices current settings
 sleep_detect   Turns on sleep/suspend detection
 unit_test      Performs a self test
 upgrade        Uploads new firmware image to flirc hardware
 version        Print the application version and device version if connected
 wait           Waits for the device to be plugged in (used for scripting)

Display More

When trying to record a key-press with flirc_util record enter :

Code

 # flirc_util record enter
[E] lib/libtransport/hid.c hid_recv_packet(217): Wrong response length = 0
[E] lib/libtransport/hid.c hid_recv_packet(218): hidapi: Success
[E] lib/libtransport/transport.c _recv_packet(127): _recv_packet: recv packet error = -1
[E] lib/libtransport/transport.c _dev_send_cmd(202): recv timeout
Error getting version
device disconnected, can't run command

mray · Flirc remote not working mray November 28, 2025 at 10:55 AM

Code

# flirc_util
-sh: flirc_util: not found

Looks like it is not installed on my pi.

mray · Flirc remote not working mray November 28, 2025 at 12:48 AM

My Flirc (2nf gen) USB remote just does not register any input. Not even direction keys.

I successfully set up my Flirc USB remote with the official app. It updated the firmware, too. It works on my Manjaro Desktop.
Connecting it to my Raspberry Pi 4 in any combination -directly -via hub -usb-extension does not help.
changing input language on kodi/libreeelec to en(us) -or- de/German does not help.
Installing the Flirc add-on does not help.
When I ssh into my libreeelec and do "lsusb" it shows up: "Bus 001 Device 006: ID 20a0:0006 Clay Logic flirc"

Code

cat /sys/kernel/debug/usb/devices | paste says:

T:  Bus=01 Lev=03 Prnt=03 Port=02 Cnt=03 Dev#=  6 Spd=12   MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=20a0 ProdID=0006 Rev= 2.00
S:  Manufacturer=flirc.tv
S:  Product=flirc
S:  SerialNumber=CB23EAE950584832322E3120FF041444
C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=03(HID  ) Sub=00 Prot=01 Driver=usbhid
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=8ms
E:  Ad=01(O) Atr=03(Int.) MxPS=  64 Ivl=8ms
I:* If#= 1 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=01 Driver=usbhid
E:  Ad=84(I) Atr=03(Int.) MxPS=   8 Ivl=50ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=03(HID  ) Sub=00 Prot=01 Driver=usbhid
E:  Ad=85(I) Atr=03(Int.) MxPS=  64 Ivl=8ms
E:  Ad=05(O) Atr=03(Int.) MxPS=  64 Ivl=8ms

Display More

… I'm starting to get out of ideas of where to look and what to try – I appreciate any hints.