Posts by mindcavity

    Unfortunately there is no way to change playback speed. You can only adjust the time difference between audio and video. If not already done, disable the "Sync Playback to Display" option.

    Thanks for the reply. Yeah, I've toggled Sync Playback to Display on and off to see if it helps, didn't affect my "Captain Kirk sounds like he just inhaled helium" speed issues.

    I may just have to pick up a few inexpensive HDMI to composite converters to help with this project but wanted to triple check and see if there was known fix before spending the money.

    Appreciate the help.

    Hi,

    Apologies if this has been addressed before but I didn't see too much else regarding this particular issue.

    I'm using a Raspberry Pi 4 and streaming content via PVR.

    Everything works fine over HDMI but over the composite output the video and audio are slightly sped up. I'm going into an NTSC CRT TV.

    I've added this to my cmdline.txt

    boot=UUID=0701-4124 disk=UUID=783cd4a2-fc53-4b6d-a6aa-a7741a567f68 quiet video=Composite-1:720x480@60ie

    and here is the (I believe) relevant parts of my config.txt


    Curious if this is a known issue or something awry with my settings.

    My Raspberry 3B seems to work ok with a similar setup and this 4 works fine over HDMI, just struggling with the composite out. I've tried another Raspberry Pi 4 with a barebones install, and with an older version of LibreElec and still getting similar issues.

    Thanks for any help and sorry again if this has been addressed in the past!

    If it helps, here are my debug logs:
    https://paste.libreelec.tv/magical-shrew.log