Happy to loop in with the P2 and M1 on my desk too.
Sorry, I didn't understand. do you have LE not working on Station P2 and M1 ?
Posts by balbes150
-
-
I'm interested to see what's required for RK3568. Target device would be Odroid-M1.
There will be difficulties with Odroid M1 (a bad loader is used there, you need to use a normal 2022 and deal with the kernel), write to me in the mail.
-
balbes150 do you have RK356x change in a GitHub repo/branch? - I looked but didn't see them in your account.
I didn't submit these changes. Do you want to use for your device?
-
Version 20220601.
5.18.1 kernel is used for 33xx and 356x
-
Does LibreELEC work on Ugoos UT8 and UT8 Pro which also uses a Rockchip 3568 SoC?
No, TV boxes are not supported.
-
mediainfo below.
I need the video itself (to run and evaluate the juice), not its parameters.
-
Just tested Latest image for roc-rk3328 and sadly it cannot play h265 8bit/10bit videos
I am looking for something wife/kids friendly where it should just work on the TV with remote.
Does all codec work on roc-rk3399 ?
Is there any device which can play all codecs smoothly ?
What is the physical resolution of the TV ? Show a sample (link) video, with the desired format, I'll try to run it on different devices (rk33x rk356x aw).
-
Version 20220511.
5.17.6 kernel is used for 33xx
5.18-rc6 kernel is used for 356x.
-
I guess I spoke too soon. Initial DRM driver landed in drm-misc and it will be in 5.19:
I have been using rk356x LE on my devices for a long time, it works quite well.
-
Version 20220504. The 5.17.5 core is used for 33xx and the 5.18-rc5 core is used for 356x.
Added support (images) for Banana PI R2 pro (rk3568).
-
Version 20220426. kernel 5.17.4 (rk33xx) and kernel 5.18-rc4 (rk356x)
Added support for different screen resolutions for rk356x.
-
Version 20220418 kernel for rk33xx uses 5.17.3, for rk356x uses 5.18-rc3.
Please note, now all the images for rk33xx and rk356x are in the same directory.
-
New version 20220415 for RK356X.
Station M2 | P2
Quartz64a
An important change, u-boot has been added to the images, this allows you to run LE as usual, without additional systems, directly from an SD card or eMMC. The launch from USB media is also saved, and any systems can be started from USB.
That is, to launch LE, it is enough to download, unpack and burn the LE image to a media, connect it to the device and turn on the power.
-
Ver 20220412 kernel 5.17.2 for rk33xx and rk356x
Fix USB for Station M2\P2 and Quartz64a
-
Ver 20220407 kernel 5.17.1 for rk3399\rk3328
Fix Wifi for Station M1 (rk3328)
Fix Wifi and BT for Station P1 (rk3399)
Fix u-boot-2022 for NanoPC T4 and Firefly-rk3399
-
Doesn't boot on my station M1 (RK3328-roc-pc image). Do I have to do something special regarding u-boot? I only burned to image to sd-card. I get "no signal" on my screen and there is a red end blue light burning together.
I have reloaded the images on the site, try the latest version. There may have been an error when sending files.
-
Yes I used the sd-card for other images (r-cade).
all other systems create their own data on the map, which interfere with the operation of LE.
I burned with usbimager on linux. I will clean the sd-card or use a new one and try again.
use only the recommended program (it is in the WiKi on the official Firefly website) to burn the image to the SD card. This is a common problem, incorrect operation of the recording program. there is information about this on the official forum * see the topic about M1).
-
Doesn't boot on my station M1 (RK3328-roc-pc image). Do I have to do something special regarding u-boot? I only burned to image to sd-card. I get "no signal" on my screen and there is a red end blue light burning together.
Which system is in eMMC ? Try to pull out the SD card and re-insert it, I regularly observe strange glitches when the SD card does not work when first installed in the card reader and you need to turn off the power, pull out the SD card and re-insert it and turn on the power. If it doesn't work. How did you record the LE image ? If the SD card was previously used for other systems, it needs to be completely cleaned and recorded.
New version 20220406 for Station M2\P2 and Quartz64a (rk356x) with 5.18-rc1 kernel.
On Station M2\P2 models, nothing needs to be changed in the settings, everything works with the default settings.
For HW to work on Quartz64, it is necessary to switch the rendering mode from DRM prime to EGL in the media player settings. I pay attention while the screen resolution is only 1080p, and decoding works well with video up to and including 1440p.
