New version 20220415 for RK356X.
Station M2 | P2
Quartz64a
An important change, u-boot has been added to the images, this allows you to run LE as usual, without additional systems, directly from an SD card or eMMC. The launch from USB media is also saved, and any systems can be started from USB.
That is, to launch LE, it is enough to download, unpack and burn the LE image to a media, connect it to the device and turn on the power.
Ver 20220412 kernel 5.17.2 for rk33xx and rk356x
Fix USB for Station M2\P2 and Quartz64a
Ver 20220407 kernel 5.17.1 for rk3399\rk3328
Fix Wifi for Station M1 (rk3328)
Fix Wifi and BT for Station P1 (rk3399)
Fix u-boot-2022 for NanoPC T4 and Firefly-rk3399
Doesn't boot on my station M1 (RK3328-roc-pc image). Do I have to do something special regarding u-boot? I only burned to image to sd-card. I get "no signal" on my screen and there is a red end blue light burning together.
I have reloaded the images on the site, try the latest version. There may have been an error when sending files.
Yes I used the sd-card for other images (r-cade).
all other systems create their own data on the map, which interfere with the operation of LE.
I burned with usbimager on linux. I will clean the sd-card or use a new one and try again.
use only the recommended program (it is in the WiKi on the official Firefly website) to burn the image to the SD card. This is a common problem, incorrect operation of the recording program. there is information about this on the official forum * see the topic about M1).
Doesn't boot on my station M1 (RK3328-roc-pc image). Do I have to do something special regarding u-boot? I only burned to image to sd-card. I get "no signal" on my screen and there is a red end blue light burning together.
Which system is in eMMC ? Try to pull out the SD card and re-insert it, I regularly observe strange glitches when the SD card does not work when first installed in the card reader and you need to turn off the power, pull out the SD card and re-insert it and turn on the power. If it doesn't work. How did you record the LE image ? If the SD card was previously used for other systems, it needs to be completely cleaned and recorded.
New version 20220406 for Station M2\P2 and Quartz64a (rk356x) with 5.18-rc1 kernel.
On Station M2\P2 models, nothing needs to be changed in the settings, everything works with the default settings.
For HW to work on Quartz64, it is necessary to switch the rendering mode from DRM prime to EGL in the media player settings. I pay attention while the screen resolution is only 1080p, and decoding works well with video up to and including 1440p.
Add ver aarch64 for Station M2 \ P2 and Quartz64a
Good news. The first alpha version of the LibreELEC image for Station P2\M2 (rk356x) is available. I pay attention. To start, you need to use a USB media with LE and a USB-enabled bootloader (for example, an SD card with an Armbian version or an Armbian version installed in eMMC).
Two new versions with the 5.17 kernel.
20220331 uses the old u-boot-2021.07.
version 20220401 uses the new u-boot-2022.04. The version with the new u-boot-2022 has the ability to select the system on the screen. ie, you can use multiple systems on the same media.
that is, there is no way to install libreelec?
I do not have such equipment, I do not know what is needed for it.
Is it possible to take a DTS file extracted from an Android TV box running kernel 4.4, and convert the file to 5.x or use it to update one of the existing 5.x files?
direct use of DTB from core 4 on core 5 is not possible, substantial work is needed to convert it and change it to the core 5 format.
Ver 20220311 kernel 5.16.12
Good afternoon!
I extracted the files from the MK39 firmware, can I assemble your firmware with them?
No, this is for the old 4.4 kernel, in my builds the 5.x kernel
Ver 20220218 kernel 5.16.9
Ver 20220112 kernel 5.16.4
Hello, there is an interesting device on the Internet that is of interest. It has an rk 3399 processor. What firmware can be installed on it. What is its compatibility with other consoles?
I don't recommend it TV box. rk3399 is a powerful chip with unique capabilities that competitors do not have (NVMe). To fully realize its power, it will also be necessary to redo the cooling system. Therefore, it makes no sense to spend money on TV box, watch SbS rk3328\rk3399 better. If you definitely need a TV box, it's better to look at the Allwinner H6 (not H616) models.
Ver 20220112 kernel 5.15.14
However..latest Armbian images (5.10 and 5.15 kernels)
Don't mislead people, there have never been such versions of Armbian (with such kernel versions). This version of unknown origin and content, Armbian has nothing to do with them and is not responsible for them in any way. In the future, do not use the "Armbian" designation for such versions.
too as the Armbian ones were plaiguarised from LE in the first place.
Not so. 
Initially, I developed a universal multiloading system for Armbian, and only then transferred it to LE. By the way, LE still uses an outdated version of the universal multiload, which has long been replaced in Armbian with a new one.
can you help?
Sorry, I don't have such a model, I don't know what's wrong there.
Does LibreElec work well on generic RockChip boxes?
If you are talking about TV boxes, no, they are not supported.
Are there plans to support recent SoCs like RK3566 and RK3568?
This is already being implemented. I am making test builds for rk356x, but the KODI interface does not work in them yet.
There is still required some mainline kernel work to be done for video.
Hi Alex
Using the latest patches for VOP2, I am building a version of LE with a 5.16 kernel. The system starts normally, there is a primary LE splash screen, the partition is expanded (the process is correctly displayed on HDMI). Next comes a reboot and an attempt to launch KODI. But the interface (GUI) is not starting yet. Maybe I'm building KODI incorrectly (other options are needed). In Armbian, the XFCE desktop is working and the system can already be used to play video (minimal) with HDMI audio. I am testing these assemblies on Station M2\P2, Armbian has the main equipment running (HDMI USB LAN1\2 HDMI sound).
I haven´t found any more recent images for RK3188, any plan to release newer ones in the future?
I added version 2021115-armv7, but I didn't check the work of rk3188\rk3288.
