Posts by balbes150

**balbes150** · 7.0.2.008 build for S905/S905X **balbes150** October 16, 2016 at 2:25 PM

Quote from bubblegum57

I couldn't get it to boot. tty? error. I then used the dtb.img for my device, no joy

Need to re-activate the multi-boot using the new image (it uses the extended multi-boot).

**balbes150** · 7.0.2.008 build for S905/S905X **balbes150** October 15, 2016 at 6:10 PM

For those users, who do not work "back" button on the remote control, please try this version of the image.

oTjdGHHjwtezV

p/s/ I am only interested in checking the return button. It works in this version or not.

**balbes150** · 7.0.2.007 build for S905 **balbes150** October 7, 2016 at 3:15 PM

oops... I'm in your official git not seen these changes. These changes in another branch ?

**balbes150** · 7.0.2.007 build for S905 **balbes150** October 7, 2016 at 12:55 PM

Perhaps the reason is that platforms S905 and S905X different numbers of partitions, which are assigned to the internal and external MMC cards. If you connect the SD card. s905 - get mmcblk1 is external, internal mmcblk0. s905X - on the contrary , external get mmcblk0 and mmcblk1 is internal.

**balbes150** · 7.0.2.007 build for S905 **balbes150** September 20, 2016 at 6:05 PM

Quote from kszaq

(This step is not needed when you have Android on internal memory) Download Android firmware for your box - you should get it from manufacturer or seller - and extract 2 files: recovery.img and dtb.img to your SD card.

If you change the name of the dtb file for recovery, such as "recovery.dtb" and change the variables in the load script Recovery. Can have both dtb files on an external drive. From LE immediately restart in Recovery mode.

**balbes150** · [S812] MIII Plus 2Gb\16Gb eMMC **balbes150** September 16, 2016 at 4:02 PM

For operation modes, a reboot is necessary to remove from the media (after activation of the multi-download) the file aml_autoscript. When the system reboots and tries to re-use aml_autoscript

**balbes150** · [S812] MIII Plus 2Gb\16Gb eMMC **balbes150** September 16, 2016 at 11:02 AM

Try to check with this user. He wrote that when you run external drives not working, but when installed on internal memory (eMMC) in his work. Set-top boxes You have with him are not the same, but he used m8s+ and it worked. Note that there is a risk to brick and will have to restore it via cable.

LibreELEC for Tronsmart MIII Plus - FreakTab.com

**balbes150** · [S812] MIII Plus 2Gb\16Gb eMMC **balbes150** September 16, 2016 at 9:19 AM

These data can be obtained via a special hardware connection (this is an optional USB adapter, which you need to solder wires to the PCB Board). This adapter allows you to show all events from the start (u-boot), TV set-top box and on.

**balbes150** · [S812] MIII Plus 2Gb\16Gb eMMC **balbes150** September 16, 2016 at 7:24 AM

So these options are not suitable for Your equipment. Something to understand at what stage the problem, we need logs output to the console UART.

**balbes150** · [S812] MIII Plus 2Gb\16Gb eMMC **balbes150** September 15, 2016 at 3:34 PM

How to enable universal multiboot we discussed in this thread ....
message #11 #13 etc

**balbes150** · [S812] MIII Plus 2Gb\16Gb eMMC **balbes150** September 15, 2016 at 1:40 PM

For testing need universal multiboot TV box. I asked about the availability on Your TV box universal multi-boot. By the way, added to the website version of the image with the dtb data from the firmware, the link to which is given edit4ever. Maybe she could work on M8S Plus.

U2O1fRPUvCMqJ

**balbes150** · [S812] MIII Plus 2Gb\16Gb eMMC **balbes150** September 15, 2016 at 1:09 PM

Universal multiboot remained or is now used the former option boot from SD card ?

**balbes150** · [S812] MIII Plus 2Gb\16Gb eMMC **balbes150** September 15, 2016 at 9:37 AM

Quote from dankec

I think 2 or 3 firmwares for the same box in one pack.
But if you succeed to download from mega link, that'll do!

You tried to run the option for MIII_G (the link from the message 17) ?

**balbes150** · [S812] MIII Plus 2Gb\16Gb eMMC **balbes150** September 15, 2016 at 7:38 AM

Quote from edit4ever

balbes150 here is the version for the Acemax M8S+ that dankec needs. It from the Acemax download center:

MEGA

I have similar issues to dankec and hope your build method works!

Thanks, I downloaded this image. Whenever possible, I'll try to put together a new version based on these data dtb.
[hr]

Quote from dankec

Welcome back, edit4ever!

Balbes150, if you have problems with mega.nz you could also find android firmwares here: m8s .rar
5.1 works fine.

Thanks for your effort!

The archive is 1.7 GB , this is such firmware ???? Or is there a archive of the many other options ?

**balbes150** · [S812] MIII Plus 2Gb\16Gb eMMC **balbes150** September 14, 2016 at 8:07 PM

You gave a link to the image LE. That's not what I need. I need dts\dtd\dtb file for Your TV set-top box (to get the data from them to build an image LE). The files can get from the image / files with Android firmware for Your TV box. So I asked do You have a link to this firmware (from Your TV set-top box). For example, on the website of the manufacturer of Your TV box.

Now I have collected test image LE (for external media) on the basis of shared DTS file meson8m2_n200C_2G. Maybe this way will be able to start on Your equipment. At least with partial hardware support.

ba3tiLoSvAirr

**balbes150** · [S812] MIII Plus 2Gb\16Gb eMMC **balbes150** September 14, 2016 at 7:09 AM

If You have not launched a version for external drives, I don't recommend trying the installation of this version in the internal memory. Most likely, it will lead to brick. If You give a link to the firmware from Your device, I can try building a version with the desired data dtb.

**balbes150** · [S812] MIII Plus 2Gb\16Gb eMMC **balbes150** September 13, 2016 at 7:04 PM

The "Reset" button for a long time do not need to keep. Clicked the button. Turn on the power. Appeared the logo. Release the button. If you hold the button, will not occur in the system boot LE. LE can only be start when you released the button.
[hr]
Please note, the activation of multi-boot (boot from SD card when pressing the RESET button) is executed only once. All subsequent start to be performed WITHOUT pressing the button.

**balbes150** · [S812] MIII Plus 2Gb\16Gb eMMC **balbes150** September 13, 2016 at 9:56 AM

LibreELEC

SD card:

Download img.xz file and create SD card: Installation - LibreELEC
As a result, you should have system files: aml_autoscript, kernel.img, SYSTEM (etc) files on your SD card.
To boot the system for the first time you have to use one of the following:
- toothpick method: disconnect the power supply, insert SD card, use a toothpick to push reset button and connect the power while holding the button. Wait until LibreELEC logo appears and release the button.
You have to do step 3 only once. You should repeat step 3 if booting from SD fails after Android reconfiguration/update. Don't worry, it won't delete your data.