So, start the TV first, then the LE device. In that case the solution could be to run the "getedid create" command https://wiki.libreelec.tv/configuration/edid#getedid-create
I read that and tried it doesn't work. Also yesterday I tried to measure voltage on 18 pin HDMI cable. I didn't see something bad. Orange always gave 5.11v.
I see. It means my 2m cables have 3.5Ohm and it's so bad.
I think I found a problem. I have 3 HDMI. 2 HDMI are 2m and 1 HDMI = 1.5m. 2m HDMI use for TVs and 1.5m HDMI uses for PC.
If Orange PC+ use 1.5m it's all ok, but 2m have this problem. I asked chatGPT about it and chatGPT said if 2m has 1+ Ohm it's bad a cable.
Who has 2m or more HDMI cable can you check it? I checked 18 pin it's power pin.
https://paste.libreelec.tv/exciting-dassie.log - LibreELEC doesn't see TV with debug
Unplugging and plugging HDMI on Orange doesn't always work but I power off and power on TV. LibreELEC showed Connected TV but I restarted LibreELEC and nothing change.
https://paste.libreelec.tv/enormous-kiwi.log - Debug log after TV on
I have Orange PC Plus and Firstly I installed 12.0.2 LibreELEC and when I connected TV and I didn't hear sound and couldn't control it. But if I switch HDMI port on TV everything works. I read there it can be problem in 12.0.2.
I installed 11.0.6 and them updated to 12.0.1(because 12.0.1 only works after the update, when I installed 12.0.1 Orange wouldn't boot).
Today I turned on TV and Orange and LibreELEC didn't see TV and TV resolution was 1024x768, no sound. I restarted Orange but nothing changed.
https://paste.libreelec.tv/alive-cicada.log - this log when LibreELEC doesn't see TV
When I unplug HDMI on Orange and plug again. LibreELEC said Connected TV, but sound wasn't and LibreELEC resolution list wasn't change.
https://paste.libreelec.tv/game-ox.log - this log Unplug and plug HDMI
Then I restarted Orange again. I could see the correct TV resolution, when LibreELEC booted, the TV resolution was 1920x1080 and the sound was on.
https://paste.libreelec.tv/funny-longhorn.log - After restart
What's problem?
Also I want to ask about WIFI and emmc. Why LibreELEC doesn't see WIFI and emmc in Orange PC Plus?
I think I have same issue. But I use orange pc plus, and yesterday I connected my father's Philips TV and we could see video but didn't have sound and TV remote didn't work but my brother's changed HDMI to 2nd port and it worked. We could hear sound and use TV remote. But it did not work for long. If I turn off power Orange and TV after when turn on they don't see anymore. TV doesn't see Orange as Kodi(doesn't matter if I turn on TV first), but if I change HDMI to 1 port it works again(this means that if TV is connected via HDMI1 I have to switch to HDMI2, or vice versa(HDMI2 -> HDMI1)), TV show HDMI use Kodi and we can hear sound and control by TV remote.
Can anyone test this case that has the same issue? Because I don't have Orange now and I can't test to change version.
