Posts by Goood

No, except IP, I did nothing on box setup ... I don't use VLan on my Switchs (just aggregate 2 ports for my NAS)

I really don't understand ... because I do it with all ...

Sure, I forgot something !

I use DHCP from my internet box 192.168.1. (1 to 5) to configure anything (this one took 192.168.1.3)

Then, when it's done, I do MAC address to a fix IP (192.168.1.x not used)

That work all time, that also worked with my Pi4 with Libreelec 11

But unable to change IP on my Pi5 with Libreelec 12

IP change correctly, but Kodi crash after 3 to 15mn, even if I reboot Box, 3 switchs, Pi5

If I remove "MAC adress to another fix IP", Pi5 take 192.168.1.3 and everything is OK in rebooting only Pi5

I thought about IPv6, but it seem deactivated on Pi5/Libreelec

Something changed about network between Libreelec 11 & 12 ? (IPv4/IPv6)

Or maybe something wrong that engage my Loop-Protect on my switchs ?

(expl : Pi5 loop Lan/Wifi ?)(But Wifi deactivated on Pi5 ...)

(I will try to deactivate this Loop-Protect option just to test)

Oh ! sorry, I don't understand yet Linux commands

I used a copy/past "sudo -E rpi-eeprom-config --edit" as it recommended in this forum, that don't work. And so, "-E rpi-eeprom-config --edit" that don't work to

Thank you !

Quote from chewitt

You are the root user so "sudo" is not required.

I saw ! That why I wrote it !

"-E rpi-eeprom-config --edit" also no work in Lebreelec.

That don't answer to "How to add PSU_MAX_CURRENT=5000 ?"

Raspberry Pi5 + Libreelec 12 on SSD/USB
Files on a SMB NAS

That worked fine during few weeks.
Till 2 days, videos stop every 3 to 15mn :
_ Video freeze during 1-2mn, and then, back to video list.
Or
_ Directly back to video list.

After this stop/freeze :
_ My PuTTY seem work differently.
Nothing go from Libreelec to PuTTY.
Exemple : pastekodi don't show me the link.
_ Send complete logfile don't work.
But send error logfile work.

Few days ago, I only changed IP (by DHCP / MAC)
Then, last day, I rebooted Box, Switchs, NAS to try to solve.
But still don't work.

So many tests, I become crazy

error logfile :
https://paste.libreelec.tv/inspired-boxer.log
Logfiles.zip
http://gooodgame.free.fr/Forum/log-2024-06-01-13.32.55.zip
I rebooted at 15h30
Bugg at 15h31

OMG …
During I write here,
I set the old IP and Kodi is working since 1h …
How to change IP and have Kodi working fine ?
I changed IP by DHCP / MAC address, and IP changed successfully.
I rebooted Box, Switchs, NAS.
Old IP stay somewhere in Libreelec config ?

Quote from HarryH

and in EEPROM config:
https://www.raspberrypi.com/documentation/…PSU_MAX_CURRENT

PSU_MAX_CURRENT=5000

How to add PSU_MAX_CURRENT=5000 ?

"sudo -E rpi-eeprom-config --edit" no work in Lebreelec

Quote from ghtester

rpi-eeprom-config /tmp/pieeprom.bin --config /tmp/bootconf.txt --out /tmp/pieeprom

ERROR: Failed to read '/tmp/pieeprom.bin'
[Errno 2] No such file or directory: '/tmp/pieeprom.bin'

Quote from HarryH

Only to be sure, do you use a case for your RPi5 like the Argon ONE V3? I'm asking because this case doesn't pass-through the PD information to the RPi5. The case pcb is self a power sink and negotiates the power consumption with the power supply. But the connection RPi5 <-> case pcb doesn't negotiate via PD (power delivery).
The RPi5 relies on that power delivery information, to enable the whole 5A current and additional the USB boot support/max. USB current.

In such case, you need to add this lines to bootloader config /EEPROM:
PSU_MAX_CURRENT=5000

and to your config.txt:
usb_max_current_enable=1

Display More

Hi

How to add PSU_MAX_CURRENT=5000 to bootloader config /EEPROM ?

Quote from chewitt

As noted by johnny depp the installer app should be able to see the USB drive under Windows to write the LE image directly to the SSD. RPi images do not boot into an installer where you pick the install target (as in the Generic image).

...

No, it seem that the installer see only removable disk. Some usb adaptor are fixed disk.

Quote from TopQuark

I just installed it now too using Geekworm X1001.

For Windows, the easiest way is to use Balena etcher to install LE img.gz directly to the NVMe through USB adapter. Do not use the LE SD Creator. Mount the NVMe to the PCIe board. Boot. That's it. No need to make changes to the config file. There is no need for a micro SD either. The initial boot will expand the NVMe to the maximum capacity.

Balena etcher don't work too, My Pi4 don't boot on it

I'm sure that my harware is working because when I clone my SD on my SSD, my SSD is able to boot fine. Just no have all capacity

Quote from MatteN

I just installed LE12 directly on my SSD and booted from it without any SDcard involved.

How you do it !?

LibeELEC USB-SD Creator don't see SSDs

Win32DiskImager see SSDs but seem do it wrong (no boot)