Bump for last issue
Posts by Fastrap87
-
-
haha, just realized that, thanks ill redo it with only dhd
[hr]everything seems to be working fine now just one minor issue. upon reboot i have to type in my wifi password for the usb dongle every time. also is there a way to block neighboring wifi signals from appearing in the wifi connection window?
any takers for the last minor issue?
pm me if anybody has a solution -
I noticed something similar. Even video starts lagging if you scroll through the gui.
same on my end thought my box was overheating
-
Don't blacklist cfg80211 or you won't be able to use WiFi at all! Only dhd.haha, just realized that, thanks ill redo it with only dhd
[hr]haha, just realized that, thanks ill redo it with only dhd
everything seems to be working fine now just one minor issue. upon reboot i have to type in my wifi password for the usb dongle every time. also is there a way to block neighboring wifi signals from appearing in the wifi connection window?
-
It is also a module name. So all you need to do now is echo "blacklist dhd" > /storage/.config/modprobe.d/blacklist.confok ill do that and one for the cfg80211
-
Is the 8192eu not your usb wlan stick? You should blacklist the module used for the internal wlan.You can check the loaded modules with "lsmod" using ssh. But you'll need to comment your lines in autostart.sh and blacklist.conf and reboot, so we can see both modules and interfaces.
I got 8192eu without the dongle inserted
nevermind, ran lsmod again after rebooting and now it shows cfg80211
[hr]
Fastrap87 From MAC address I can tell that you need to blacklist dhd instead.
not familiar with the acroynm..what does dhd stand for? -
Maybe the devices get enumerated differently in the new version. Could you check with ssh what the output of "ifconfig" is?see attachment
[hr]
The easiest way I can think of - check which module is your WiFi chip using in lsmod then add it to blacklist.Example when module is 8189es: echo "blacklist 8189es" >> /storage/.config/modprobe.d/blacklist.conf
8192eu is my module, i used this command then rebooted but still no luck.
-
Thank you
Spoke too soon, this method no longer works with the latest 8.0.0b release. I tried it with both of my boxes one an s905 by sunvell and the other a s905x mini ms8II
-
-
Display More
So I recently got LE set up on an MXQ pro 4k.Originally, the temps reported in Kodi and Android were heading north of 90°C. So I popped it open, and was surprised to find the most basic of heatsinks - basically a thin strip of metal glued to the chip.
So I ripped a heatsink off an old graphics card, and stuck it on with some heatsink plaster.
Now the temps hover between 70° and 80° C depending on load.
Still seems very high, although there isn't any problems with stability, and the subjective temperature outside the case doesn't seem too hot.
Anyone else have similar temps, or anything to add?
You can order a raspberry pi 3 heatsink kit (mixture of copper and aluminum ) and drill tiny ventilation holes around the box.
-
-
Simply don't turn the box off.Exactly,these boxes are basically in raspberry pi power use territory when idle
-
You can put the command in the file autostart.sh in the config directory. This file is executed every time libreelec starts. The old openelec wiki describes it nicely:So copy and paste ifconfig wlan0 down somewhere in the auto start.sh file? Can I edit it through notepad through samba shares on Linux mint?
-
Does that require another sudo command?
[hr]
Tried it with wlan0 it worked until a rebooted the box,now the onboard wifi is back on -
Hello I have a minim8 s905x box running 703012h,I have a USB wifi dongle that I prefer to use over the internal chip,is there a way to disable it completely so as not to compete with the external adapter? Also will Bluetooth be affected after disabling internal chip?
-
experimental aigale....???? anybody with the beelink minimxiii ii s905x care to test this version out? have a box sitting in a cart on a certain website....
-
Can't answer the last part but note that the MXIII II utilizes bluetooth/wifi chip requiring driver that is not supported (yet).
Also I believe your vendor link will get deleted! You might consider to edit your post and delete that part yourself
Does anyone know if the wifi/bluetooth drivers are supported in libreelec yet? a certain site has the mxIII II on a flash sale....
-
Display More
Sunvell T95M 2GBAndroid version:
ro.build.id=LMY47V
ro.build.display.id=LMY47V.20160622 test-keys
ro.build.version.incremental=20160622
ro.build.version.sdk=22
ro.build.version.release=5.1.1
ro.build.version.security_patch=2015-11-01
ro.build.date=Wed Jun 22 10:17:09 CST 2016
ro.build.date.utc=1466561829
ro.product.name=p201_8723
ro.product.device=p201_8723
ro.product.board=p201_8723
[hr]Sunvell T95M 1GB
Thx DroiDMester @ prohardver.hu
Hi, do you know if these device trees were added to the 7.0.2.007 Almost there build? as a generic device tree? or can these be renamed and used with the build?
