Posts by Squeeto

Hi,

Thanks for any assistance.

LibreELEC (official) 11.0.3 Generic.x86_64

I have a Dell Wireless 1704 802.11b/g/n (2.4GHz)-Broadcom in a laptop.

How do I setup wifi?

LibreELEC > Connections > only shows eth0

dmesg has-

[ 8.821551] bcma-pci-bridge 0000:06:00.0: bus0: Found chip with id 43142, rev 0x01 and package 0x08

[ 8.821586] bcma-pci-bridge 0000:06:00.0: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x28, class 0x0)

[ 8.821614] bcma-pci-bridge 0000:06:00.0: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x21, class 0x0)

[ 8.821665] bcma-pci-bridge 0000:06:00.0: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x16, class 0x0)

[ 8.821740] bcma-pci-bridge 0000:06:00.0: bus0: Core 3 found: UNKNOWN (manuf 0x43B, id 0x368, rev 0x00, class 0x0)

[ 8.836795] bcma-pci-bridge 0000:06:00.0: bus0: Bus registered

[ 9.981476] cfg80211: Loading compiled-in X.509 certificates for regulatory database

[ 10.318099] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'

there is no mention of WLAN

lsusb shows-

Bus 001 Device 006: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller

Bus 001 Device 005: ID 04f3:031a Elan Microelectronics Corp. Touchscreen

Bus 001 Device 004: ID 0a5c:21d7 Broadcom Corp. BCM43142 Bluetooth 4.0

Bus 001 Device 003: ID 0bda:5756 Realtek Semiconductor Corp. Integrated_Webcam_HD

Bus 001 Device 002: ID 8087:8001 Intel Corp. Integrated Hub

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub

Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

settings has-

[global]

OfflineMode=false

Timeservers=

[Wired]

Enable=true

Tethering=false

Tethering.Freq=2412

[WiFi]

Enable=true

I tried Network > Max Wait Time of 30 seconds but that didn't help.

Thank you

Quote from mglae

Please read Using the 2nd Display as the Main Display for Kodi on Your Laptop

Thank you all.

mglae, the link helped.

It is now working with:

APPEND boot= .. ssh quiet video=HDMI-A-1:1920x1080M@60 video=eDP-1:d

Okay, this is the HDMI part

Nov 19 01:25:13 LibreELEC kernel: input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
Nov 19 01:25:13 LibreELEC kernel: input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
Nov 19 01:25:13 LibreELEC kernel: input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19

tail /sys/class/drm/*/status

==> /sys/class/drm/card0-HDMI-A-1/status <==

connected

==> /sys/class/drm/card0-eDP-1/status <==

connected

I am not sure why it reports A-1, I have it in the second slot but..

The monitor is 1920x1080. I know that it works on a 1080i broadcast signal.

syslinux.cfg is

APPEND boot=UUID=F933-57A7 disk=UUID=42d0a3c4-fa0b-42b0-a341-89f97efdcbb9 ssh quiet

Thank you.

I will try it later, I am headed out for the day.

Dell Inspiron with Intel HD graphics.

I used LibreELEC-Generic.x86_64-11.0.3.img.

Maybe because I loaded it from Linux:

dd if=LibreELEC-Generic.x86_64-11.0.3.img of=/dev/sdc bs=4M status=progress conv=fdatasync

Hi,

I installed 11.0.3 on a laptop and the banner pops up on the HDMI monitor during boot but disappears seconds after.

I read that /flash/cmdline.txt can be modified but..

ls

EFI SYSTEM ldlinux.sys

KERNEL ldlinux.c32 syslinux.cfg

has no cmdline.txt file to modify.

Have things changed?

Thank you for the help.