Sounds like you need to apply the u-boot environment patch, the kernel load bit in the boot script will crop the binary being loaded into memory if the patch hasn't been applied. see this post; RE: [9.0.0] LibreELEC builds for MX2/G18
Greetings, I can’t apply the u-boot patch, can I somehow check whether it worked or not, is there another way to install the patch?
^ This is causing your problem, so try to install 'texinfo' package first:
sudo apt install texinfo
Thank you, the Libtool package has compiled )
You could cut a part of the error into a code block, it's hard to figure it out without it.
Greetings, now I'm trying to build on Ubuntu 20.04, until the same error on the Libtool-2.4.6 package has progressed further, I don't see anything specific in the logs
[012/243] [DONE] build autoconf-archive:host
GET libtool (archive)
--2023-07-17 13:51:58-- http://ftpmirror.gnu.org/libtool/libtool-2.4.6.tar.gz
Resolving ftpmirror.gnu.org (ftpmirror.gnu.org)... 209.51.188.200, 2001:470:142:5::200
Connecting to ftpmirror.gnu.org (ftpmirror.gnu.org)|209.51.188.200|:80... connected.
HTTP request sent, awaiting response... 302 Moved Temporarily
Location: http://mirror.truenetwork.ru/gnu/libtool/libtool-2.4.6.tar.gz [following]
--2023-07-17 13:51:59-- http://mirror.truenetwork.ru/gnu/libtool/libtool-2.4.6.tar.gz
Resolving mirror.truenetwork.ru (mirror.truenetwork.ru)... 94.247.111.11
Connecting to mirror.truenetwork.ru (mirror.truenetwork.ru)|94.247.111.11|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1806697 (1.7M) [application/octet-stream]
Saving to: '/home/user/LE9/libreelec-AML/sources/libtool/libtool-2.4.6.tar.gz'
/home/user/LE9/libr 100%[===================>] 1.72M 8.46MB/s in 0.2s
2023-07-17 13:51:59 (8.46 MB/s) - '/home/user/LE9/libreelec-AML/sources/libtool/libtool-2.4.6.tar.gz' saved [1806697/1806697]
INFO Calculated checksum: e3bd4d5d3d025a36c21dd6af7ea818a2afcd4dfc1ea5a17b39d7854bcd0c06e3
UNPACK libtool
APPLY PATCH (common) packages/devel/libtool/patches/libtool-01_dont_relink_against_host.patch
File build-aux/ltmain.sh is read-only; trying to patch anyway
patching file build-aux/ltmain.sh
Hunk #1 succeeded at 8361 (offset 28 lines).
APPLY PATCH (common) packages/devel/libtool/patches/libtool-02-use_ld.patch
File build-aux/ltmain.sh is read-only; trying to patch anyway
patching file build-aux/ltmain.sh
Hunk #1 succeeded at 7275 (offset 25 lines).
APPLY PATCH (common) packages/devel/libtool/patches/libtool-03-remove-help2man-dependency.patch
patching file Makefile.am
FIXCONFIG /home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/libtool-2.4.6/build-aux/
BUILD libtool (host)
TOOLCHAIN autotools
AUTORECONF libtool
autoreconf: Entering directory `/home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/libtool-2.4.6'
autoreconf: configure.ac: not using Gettext
autoreconf: running: /home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/toolchain/bin/aclocal -I /home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/toolchain/armv7a-libreelec-linux-gnueabi/sysroot/usr/share/aclocal -I /home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/toolchain/armv7a-libreelec-linux-gnueabi/sysroot/usr/share/aclocal --force -I m4
autoreconf: configure.ac: tracing
autoreconf: configure.ac: not running libtoolize: --install not given
autoreconf: running: /home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/toolchain/bin/autoconf --include=/home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/toolchain/armv7a-libreelec-linux-gnueabi/sysroot/usr/share/aclocal --force
autoreconf: running: /home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/toolchain/bin/autoheader --include=/home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/toolchain/armv7a-libreelec-linux-gnueabi/sysroot/usr/share/aclocal --force
autoreconf: running: /home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/toolchain/bin/automake --force-missing
autoreconf: Leaving directory `/home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/libtool-2.4.6'
Executing (host): /home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/libtool-2.4.6/configure --host=x86_64-linux-gnu --build=x86_64-linux-gnu --prefix=/home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/toolchain --bindir=/home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/toolchain/bin --sbindir=/home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/toolchain/sbin --sysconfdir=/home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/toolchain/etc --libexecdir=/home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/toolchain/lib --localstatedir=/home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/toolchain/var --disable-static --enable-shared --enable-static --disable-shared
## ------------------------- ##
## Configuring libtool 2.4.6 ##
## ------------------------- ##
checking for GNU M4 that supports accurate traces... /home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/toolchain/bin/m4
checking whether /home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/toolchain/bin/m4 accepts --gnu... yes
checking how m4 supports trace files... --debugfile
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
configure: autobuild project... GNU Libtool
configure: autobuild revision... 2.4.6
configure: autobuild hostname... user-VirtualBox
configure: autobuild mode... default
configure: autobuild timestamp... 20230717T065206Z
checking for x86_64-linux-gnu-gcc... /home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/toolchain/bin/host-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether /home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/toolchain/bin/host-gcc accepts -g... yes
checking for /home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/toolchain/bin/host-gcc option to accept ISO C89... none needed
checking whether /home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/toolchain/bin/host-gcc understands -c and -o together... yes
checking for style of include used by make... GNU
checking dependency style of /home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/toolchain/bin/host-gcc... gcc3
checking how to run the C preprocessor... cpp
checking for grep that handles long lines and -e... /usr/bin/grep
checking for egrep... /usr/bin/grep -E
checking for Minix Amsterdam compiler... no
checking how to run the C preprocessor... cpp
checking how to print strings... printf
checking for a sed that does not truncate output... /home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/toolchain/bin/sed
checking for fgrep... /usr/bin/grep -F
checking for ld used by /home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/toolchain/bin/host-gcc... ld
checking if the linker (ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... nm
checking the name lister (nm) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking how to convert x86_64-pc-linux-gnu file names to x86_64-pc-linux-gnu format... func_convert_file_noop
checking how to convert x86_64-pc-linux-gnu file names to toolchain format... func_convert_file_noop
checking for ld option to reload object files... -r
checking for x86_64-linux-gnu-objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for x86_64-linux-gnu-dlltool... no
checking for dlltool... no
checking how to associate runtime and link libraries... printf %s\n
checking for x86_64-linux-gnu-ar... ar
checking for archiver @FILE support... @
checking for x86_64-linux-gnu-strip... strip
checking for x86_64-linux-gnu-ranlib... ranlib
checking command to parse nm output from /home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/toolchain/bin/host-gcc object... ok
checking for sysroot... no
checking for a working dd... /usr/bin/dd
checking how to truncate binary pipes... /usr/bin/dd bs=4096 count=1
checking for x86_64-linux-gnu-mt... no
checking for mt... mt
checking if mt is a manifest tool... no
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if /home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/toolchain/bin/host-gcc supports -fno-rtti -fno-exceptions... no
checking for /home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/toolchain/bin/host-gcc option to produce PIC... -fPIC -DPIC
checking if /home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/toolchain/bin/host-gcc PIC flag -fPIC -DPIC works... yes
checking if /home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/toolchain/bin/host-gcc static flag -static works... yes
checking if /home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/toolchain/bin/host-gcc supports -c -o file.o... yes
checking if /home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/toolchain/bin/host-gcc supports -c -o file.o... (cached) yes
checking whether the /home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/toolchain/bin/host-gcc linker (ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for shl_load... no
checking for shl_load in -ldld... no
checking for dlopen... no
checking for dlopen in -ldl... yes
checking whether a program can dlopen itself... yes
checking whether a statically linked program can dlopen itself... no
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... no
checking whether to build static libraries... yes
checking what extension is used for runtime loadable modules... .so
checking what variable specifies run-time module search path... LD_LIBRARY_PATH
checking for the default library search path... /lib /usr/lib /usr/lib/x86_64-linux-gnu/libfakeroot /usr/local/lib /usr/local/lib/x86_64-linux-gnu /lib/x86_64-linux-gnu /usr/lib/x86_64-linux-gnu /lib32 /usr/lib32 /libx32 /usr/libx32
checking for library containing dlopen... -ldl
checking for dlerror... yes
checking for shl_load... (cached) no
checking for shl_load in -ldld... (cached) no
checking for dld_link in -ldld... no
checking for _ prefix in compiled symbols... no
checking whether deplibs are loaded by dlopen... yes
checking for argz.h... yes
checking for error_t... yes
checking for argz_add... yes
checking for argz_append... yes
checking for argz_count... yes
checking for argz_create_sep... yes
checking for argz_insert... yes
checking for argz_next... yes
checking for argz_stringify... yes
checking if argz actually works... yes
checking whether libtool supports -dlopen/-dlpreopen... yes
checking for unistd.h... (cached) yes
checking for dl.h... no
checking for sys/dl.h... no
checking for dld.h... no
checking for mach-o/dyld.h... no
checking for dirent.h... yes
checking for closedir... yes
checking for opendir... yes
checking for readdir... yes
checking for strlcat... no
checking for strlcpy... no
checking whether we are using the GNU C++ compiler... yes
checking whether /home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/toolchain/bin/host-g++ accepts -g... yes
checking dependency style of /home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/toolchain/bin/host-g++... gcc3
checking how to run the C++ preprocessor... /home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/toolchain/bin/host-g++ -E
checking for ld used by /home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/toolchain/bin/host-g++... ld -m elf_x86_64
checking if the linker (ld -m elf_x86_64) is GNU ld... yes
checking whether the /home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/toolchain/bin/host-g++ linker (ld -m elf_x86_64) supports shared libraries... yes
checking for /home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/toolchain/bin/host-g++ option to produce PIC... -fPIC -DPIC
checking if /home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/toolchain/bin/host-g++ PIC flag -fPIC -DPIC works... yes
checking if /home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/toolchain/bin/host-g++ static flag -static works... yes
checking if /home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/toolchain/bin/host-g++ supports -c -o file.o... yes
checking if /home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/toolchain/bin/host-g++ supports -c -o file.o... (cached) yes
checking whether the /home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/toolchain/bin/host-g++ linker (ld -m elf_x86_64) supports shared libraries... yes
checking dynamic linker characteristics... (cached) GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for x86_64-linux-gnu-g77... no
checking for x86_64-linux-gnu-xlf... no
checking for x86_64-linux-gnu-f77... no
checking for x86_64-linux-gnu-frt... no
checking for x86_64-linux-gnu-pgf77... no
checking for x86_64-linux-gnu-cf77... no
checking for x86_64-linux-gnu-fort77... no
checking for x86_64-linux-gnu-fl32... no
checking for x86_64-linux-gnu-af77... no
checking for x86_64-linux-gnu-xlf90... no
checking for x86_64-linux-gnu-f90... no
checking for x86_64-linux-gnu-pgf90... no
checking for x86_64-linux-gnu-pghpf... no
checking for x86_64-linux-gnu-epcf90... no
checking for x86_64-linux-gnu-gfortran... no
checking for x86_64-linux-gnu-g95... no
checking for x86_64-linux-gnu-xlf95... no
checking for x86_64-linux-gnu-f95... no
checking for x86_64-linux-gnu-fort... no
checking for x86_64-linux-gnu-ifort... no
checking for x86_64-linux-gnu-ifc... no
checking for x86_64-linux-gnu-efc... no
checking for x86_64-linux-gnu-pgfortran... no
checking for x86_64-linux-gnu-pgf95... no
checking for x86_64-linux-gnu-lf95... no
checking for x86_64-linux-gnu-ftn... no
checking for x86_64-linux-gnu-nagfor... no
checking for g77... no
checking for xlf... no
checking for f77... no
checking for frt... no
checking for pgf77... no
checking for cf77... no
checking for fort77... no
checking for fl32... no
checking for af77... no
checking for xlf90... no
checking for f90... no
checking for pgf90... no
checking for pghpf... no
checking for epcf90... no
checking for gfortran... no
checking for g95... no
checking for xlf95... no
checking for f95... no
checking for fort... no
checking for ifort... no
checking for ifc... no
checking for efc... no
checking for pgfortran... no
checking for pgf95... no
checking for lf95... no
checking for ftn... no
checking for nagfor... no
checking whether we are using the GNU Fortran 77 compiler... no
checking whether accepts -g... no
checking for x86_64-linux-gnu-gfortran... no
checking for x86_64-linux-gnu-g95... no
checking for x86_64-linux-gnu-xlf95... no
checking for x86_64-linux-gnu-f95... no
checking for x86_64-linux-gnu-fort... no
checking for x86_64-linux-gnu-ifort... no
checking for x86_64-linux-gnu-ifc... no
checking for x86_64-linux-gnu-efc... no
checking for x86_64-linux-gnu-pgfortran... no
checking for x86_64-linux-gnu-pgf95... no
checking for x86_64-linux-gnu-lf95... no
checking for x86_64-linux-gnu-ftn... no
checking for x86_64-linux-gnu-nagfor... no
checking for x86_64-linux-gnu-xlf90... no
checking for x86_64-linux-gnu-f90... no
checking for x86_64-linux-gnu-pgf90... no
checking for x86_64-linux-gnu-pghpf... no
checking for x86_64-linux-gnu-epcf90... no
checking for x86_64-linux-gnu-g77... no
checking for x86_64-linux-gnu-xlf... no
checking for x86_64-linux-gnu-f77... no
checking for x86_64-linux-gnu-frt... no
checking for x86_64-linux-gnu-pgf77... no
checking for x86_64-linux-gnu-cf77... no
checking for x86_64-linux-gnu-fort77... no
checking for x86_64-linux-gnu-fl32... no
checking for x86_64-linux-gnu-af77... no
checking for gfortran... no
checking for g95... no
checking for xlf95... no
checking for f95... no
checking for fort... no
checking for ifort... no
checking for ifc... no
checking for efc... no
checking for pgfortran... no
checking for pgf95... no
checking for lf95... no
checking for ftn... no
checking for nagfor... no
checking for xlf90... no
checking for f90... no
checking for pgf90... no
checking for pghpf... no
checking for epcf90... no
checking for g77... no
checking for xlf... no
checking for f77... no
checking for frt... no
checking for pgf77... no
checking for cf77... no
checking for fort77... no
checking for fl32... no
checking for af77... no
checking whether we are using the GNU Fortran compiler... no
checking whether accepts -g... no
checking for x86_64-linux-gnu-gccgo... no
checking for gccgo... no
checking for x86_64-linux-gnu-gcj... no
checking for gcj... no
checking for x86_64-linux-gnu-windres... no
checking for windres... no
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating config.h
config.status: linking /home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/libtool-2.4.6/GNUmakefile to GNUmakefile
config.status: executing tests/atconfig commands
config.status: executing depfiles commands
config.status: executing libtool commands
Executing (host): make
make[1]: Entering directory '/home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/libtool-2.4.6/.x86_64-linux-gnu'
GEN libtoolize
make all-recursive
make[2]: Entering directory '/home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/libtool-2.4.6/.x86_64-linux-gnu'
Making all in .
make[3]: Entering directory '/home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/libtool-2.4.6/.x86_64-linux-gnu'
make[4]: Entering directory '/home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/libtool-2.4.6/.x86_64-linux-gnu'
CC libltdl/loaders/dlopen.lo
make[4]: Leaving directory '/home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/libtool-2.4.6/.x86_64-linux-gnu'
Updating /home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/libtool-2.4.6/doc/version.texi
CC libltdl/lt__strl.lo
CC libltdl/loaders/libltdl_libltdl_la-preopen.lo
CC libltdl/libltdl_libltdl_la-lt__alloc.lo
CC libltdl/libltdl_libltdl_la-lt_dlloader.lo
CC libltdl/libltdl_libltdl_la-lt_error.lo
CC libltdl/libltdl_libltdl_la-ltdl.lo
CC libltdl/libltdl_libltdl_la-slist.lo
CCLD libltdl/dlopen.la
ar: `u' modifier ignored since `D' is the default (see `U')
CCLD libltdl/libltdl.la
ar: `u' modifier ignored since `D' is the default (see `U')
make[3]: Leaving directory '/home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/libtool-2.4.6/.x86_64-linux-gnu'
make[2]: Leaving directory '/home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/libtool-2.4.6/.x86_64-linux-gnu'
make[1]: Leaving directory '/home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/libtool-2.4.6/.x86_64-linux-gnu'
make[1]: Entering directory '/home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/libtool-2.4.6/.x86_64-linux-gnu'
make install-recursive
make[2]: Entering directory '/home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/libtool-2.4.6/.x86_64-linux-gnu'
Making install in .
make[3]: Entering directory '/home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/libtool-2.4.6/.x86_64-linux-gnu'
MAKEINFO /home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/libtool-2.4.6/doc/libtool.info
/home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/libtool-2.4.6/build-aux/missing: line 81: makeinfo: command not found
WARNING: 'makeinfo' is missing on your system.
You should only need it if you modified a '.texi' file, or
any other file indirectly affecting the aspect of the manual.
You might want to install the Texinfo package:
<http://www.gnu.org/software/texinfo/>
The spurious makeinfo call might also be the consequence of
using a buggy 'make' (AIX, DU, IRIX), in which case you might
want to install GNU make:
<http://www.gnu.org/software/make/>
make[3]: *** [Makefile:1352: /home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/libtool-2.4.6/doc/libtool.info] Error 127
make[3]: Leaving directory '/home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/libtool-2.4.6/.x86_64-linux-gnu'
make[2]: *** [Makefile:1558: install-recursive] Error 1
make[2]: Leaving directory '/home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/libtool-2.4.6/.x86_64-linux-gnu'
make[1]: *** [Makefile:1860: install] Error 2
make[1]: Leaving directory '/home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/libtool-2.4.6/.x86_64-linux-gnu'
FAILURE: scripts/build libtool:host has failed!
[013/243] [FAIL] build libtool:host
The following logs for this failure are available:
stdout: /home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/.threads/logs/12/stdout
stderr: /home/user/LE9/libreelec-AML/build.LibreELEC-Amlogic_MX2.arm-9.2.8.10/.threads/logs/12/stderr
parallel: This job failed:
package_worker 2 12 243 'build libtool:host'
Parallel build failure - see log for details. Time of failure: Mon Jul 17 13:52:11 +07 2023
make: *** [Makefile:18: amlpkg] Ошибка 1
user@user-VirtualBox:~/LE9/libreelec-AML$qUE_ARM made support for it, you can find it in this topic:
Yesterday all evening I tried to build an image according to this instruction, I built it on Ubuntu 18.04, I got stuck on a libtool error, I can’t figure out what is missing
Hi all! Is there an image for Matricom G-Box Midnight MX2 on aml8726-mx?