Posts by gecko20016

I use TVheadend 4.2

BER=0, SNR is 15dB, so should be fine

I noticed now that some HD channels seem to be working, while some are not. With the one's that are working i get continous input and output streamrate between 10-20Mbps. The ones which are not working show similar values, but intermitted with 0 and I get some error bits. Also, once I witch to a non-working HD stream, all streams, including SD stop working

I bought this tuner because it was recommended to work well with LE/Kodi. Can you suggest another model or manufacturer which works well in combination with a RPi4 ? I actually just want a setup that works reliably.

saved and rebooted. I have a 12V 1.5A power supply connected to the DVB-S Adapter. Where do I see the mentioned parameters?

That's what I did, Input buffer size 18800, skip initial bytes 18800 or 188000 or 1880000 did not help.

Hi,

so software encoding is not a solution, because at some point it will crash the whole system (meaning no video output any more, not repsonsive. Adjusting input buffer size did also not help. Any other ideas?

Quote from DDuck007

… i quote myself …

Sorry, took me a while to understand, but thanks.

Quote from DDuck007

Try to enable „skip initial bytes“ in TVHeadend …

What I found requires a number, do you mean setting from 0 to 1?

Quote from petediscrete

He’s already told you. It’s in TVH. Do a little research first https://docs.tvheadend.org/webui/config_tvadapters/I

Turning off hardware acceleration seems to have solved my issues, thanks for helping me out. I did quite a bit of research, but I still find it hard to navigate information about LE/Kodi/TVHeadend and where to find and setup what, but I am getting there thanks to you guys.

Hi Dduck, again, where do I need to make those changes? In Kodi I cannot find this option, do I need to look for it in the web interface of the TvHeadend sever? Is this a client or serve setting?

Bst Gregor

Where do I find this setup?

Quote from petediscrete

What DVBS tuner are you using.

Hey Pete. I am using the pctv 461e.

Hi,

I am running LE10 on a raspbery Pi 4B as a standalone DVB-S receiver and player, so i have the server and client running on the same device. When I update to LE 10.3 HD channels stop working, they show one frozen image, but the sound is working. When I revert back to 10.1 it starts working again. Is this a know issue? Any ideas what I could do?

Best

Gregor