Posts by trogggy
-
-
No, it's not.
-
Looking at your text doc you've run dmesg | tail as per post #7. No?
-
Anyone? Missus is mithering me about her films.
Posting the url's klojum asked for in post #2 might get you some help.
-
OH i use Confluence skin , this omit LE settings i try Estuary or is other way?
Look under programs
-
NTFS media drives shouldn't cause a problem. Check windows isn't using fast startup, or drives won't mount in LE.
-
It's skinnable - eg xonfluence has a couple of alternative favourite views. But only by directly editing the skin's DialogFavourites.xml file, so possible but far from straightforward.
-
Xonfluence and confluence mostly.
-
Is is possible to make libreelec android use the same data as libreelec on your SD card? To make it so that both use the same data?
Not really, no, because you'll have different addons present, different file-paths etc. You could share specific files / folders between operating systems but even that's likely to throw up errors if you haven't considered paths.
It would be easy enough to try though. Just copy the contents of storage/.kodi into your android kodi data folder (saving the original android files) and try. If that works fine then great - you can start making sym links.
-
There's a link to the wiki at the top of the page.
-
If you re-read what I've written it should be perfectly clear that I'm a user, not a dev.
As a user I don't see there's a problem - in fact I much prefer the current (via label) implementation. But rest assured if the devs do decide to switch to uuid's I'll just deal with it.
-
I assume those temperatures are idle, or maybe using very very low load, because i have never seen such temperatures running a movie in Kodi on any box in my life, and I have also Minix and Himedia boxes.
I also belive from your previous posts that you own a Vorke Z6, and that box runs way above that 50°C, in fact it runs at 80°C on my boxes and about every owner that has posted on Freaktab.
Beelink Mini Mxiii here:
idle temp - 21°C
after playing BBC1 HD for a few hours (H264 1080p) - 37°C
Two conclusions:
1. The box has pretty good cooling.
2. My bedroom is cold.
-
exactly that is was i did first. But after copying half of the the Backup file, the Progress gets into a neverending Job... tried 3 or 4 times, everytime the same. Copying File "aborts" after Half. You see the Progrss bar, but i wont go forward. Also the "kb/Min" gets smaller, down to 46 kb/Min and nothing happens after that. Tried also different Sticks with that Backup File - nothing.
Any suggestions?
Sorry, no. It's never failed for me.
Alternatives - image the card (eg win32diskimager or usbit in windows) or move files directly.
-
Make your backup in LE settings on machine 1.
Stick the .tar file from the Backp folder on machine 1 in the Backup folder on machine 2.
Open LE settings on machine 2 and choose 'Restore backup'.
Select your backup. click 'ok'.
No reboot. Nothing to do with the Update folder.
Edit: yes, you can move the file via smb.
-
Great. Please explain how you solved this boot issue.
I change the labels. I actually change the labels for all partitions, so I can also boot an LE usb if reqired. Yes I have to do that manually, but as I'm doing a non-standard install that seems more than reasonable to me.
-
NB: The RPi needs the SD card, no matter what.That was / is the case for the Pi and Pi2 - not for the Pi3.
How to boot from a USB Mass Storage Device on a Raspberry Pi 3 - Raspberry Pi Documentation
-
How can I reverse this
Remove the label from the data partition:
Codee2label /dev/data ""Disclaimer - I've not tried this. But LE looks for a storage partition with the 'LIBREELEC_DISK' label.
-
Do you have more than one disk with LibreELEC installed in parallel? I guess you have one disk only.
Yes, I do. On multiple machines. For years.
