Posts by polo_joe

Quote from a1bert

any progress? just tested latest kernel 4.13.12 on x86 +S950 and it's still affected

Looks like it's I/O dependent: the problem manifests after tens of minutes when just displaying DVB stream (cca 90mins) but with heavy disc I/O in serveral minutes...

EDIT: reported upstream: 197835 – DVB-S discontinuity, PES packet size mismatch, stream corruption

Confirmed, any progress here?

I could test builds on rpi3.

My dvb card is technotrend s2-4600.

Could someone tell me If its possible and how to install this builds on emmc on rock64?

your are right, errors are still there for me too on rpi3.

I had 2 recordings today without errors, so I thought the issue is gone but in the third recording there are errors again.

Sorry for the noise.

Hopefully you'll find the harmful commit.

I think there's improvement with kernel 4.14.6

commit 9a11204d2b26324636ff54f8d28095ed5dd17e91
Author: Laurent Caumont <[email protected]>
Date:   Sat Nov 11 12:44:46 2017 -0500
    media: dvb: i2c transfers over usb cannot be done from stack        commit 6d33377f2abbf9f0e561b116dd468d1c3ff36a6a upstream.

please try latest test builds from Milhouse:

Index of /builds/master/RPi2/

Index of /builds/master/Generic/

Quote from CvH

yes tested it but didn't get it working (also not at raspbian) so I guess it is still broken

Thanks for testing - would you add a comment to the tvh ticket Feature #4572: OMX Support - Tvheadend

Quote from CvH

I need to find my RPi to make some screens

Basically you have to go to the transcoding settings, create an new transcoding profile with mmal, create an NEW streaming profile and use the transcoding profile you made.

Did you have time to test and some documentation?

user oscam

Pwd oscam

smp

thanks for your efforts.

Very sad that there's no progess since about a year now.

Quote from CvH

I need to find my RPi to make some screens

Basically you have to go to the transcoding settings, create an new transcoding profile with mmal, create an NEW streaming profile and use the transcoding profile you made.

I already tried that, but I always get errors when I open livetv window and than select the new streaming profile.

screens would be of great help.

CvH

Could you please explain how to set up hw-transcoding in tvh on rpi?

I'm considering to buy a rock64, could someone test uhd livetv with high refreshrates 50/60 hz?

I know about the limitations, so I was surprised to read it's possible to stream 4 hd channels on rpi2.

Which kernel are you using on rpi2? You don't have discontinuity errors in tvheadend with latest kernels?

Quote from phaze75

Ok, thanks for the info and the manual updates!

Did you get omx transcoding to work with latest build?

last working build 1002
UOMe

non working build 1005

AWUP

I also have no captions in this build, only the icons are shown.

Build 1002 is last working for me with tvh and HTS. In later builds pvr manager doesn't start. Maybe because of tvh crash.

Anyone else experiencing this?

I also tried this build, I'm getting the following error:

2017-09-19 20:20:49.814 [ INFO] subscription: 001C: "HTTP" subscribing on channel "sixx Austria", adapter: "TechnoTrend S2-4600", network: "Astra 19,2", mux: "12662.75H", provider: "sevenonemedia", service: "sixx Austria", profile="webtv-omx-aac-mp4", hostname="10.0.0.6", client="Mozilla/5.0 (Windows NT 6.1; rv:55.0) Gecko/20100101 Firefox/55.0"
2017-09-19 20:20:50.326 [ INFO] transcode: 0002: 01:MPEG2VIDEO: ==> Using profile omx_rpi
2017-09-19 20:20:50.327 [ INFO] transcode: 0002: 02:MPEG2AUDIO: ==> Using profile webtv-aac
2017-09-19 20:20:50.970 [ INFO] libav: AVCodecContext: Changing output format.
2017-09-19 20:20:51.000 [ INFO] libav: AVCodecContext: Using OMX.broadcom.video_encode
2017-09-19 20:20:55.575 [WARNING] libav: AVFormatContext: Using AVStream.codec to pass codec parameters to muxers is deprecated, use AVStream.codecpar instead.
2017-09-19 20:20:55.575 [WARNING] libav: AVFormatContext: track 0: codec frame size is not set
2017-09-19 20:21:07.369 [WARNING] webui: Stop streaming /stream/channel/59d9a3a58c910bfa7557275bdb506242?profile=webtv-vp8-vorbis-webm, muxer reported errors
2017-09-19 20:21:07.369 [ INFO] subscription: 001C: "HTTP" unsubscribing from "sixx Austria", hostname="10.0.0.6", client="Mozilla/5.0 (Windows NT 6.1; rv:55.0) Gecko/20100101 Firefox/55.0"
2017-09-19 20:21:07.401 [ INFO] libav: AVCodecContext: Qavg: 118.000
2017-09-19 20:21:07.405 [WARNING] libav: AVCodecContext: 2 frames left in the queue on closing

I'm using rpi3 with technotrend s2-4600 dvb card.