image for pinea64 (librelec10) is totally unstable; would boot, hang during setup screen, would start again, after some 10-20 seconds screen would start to shift from left to right and hang.
are there any repositories left with the older images? thanks.
i can approve this was fixed (thanks to jernej) and i've been using it successfully since then
yeah, but i'm switching from development release specially built for me to test a thing to regular nightly builds
Thanks! I'll send fix soon.
Thanks goes all your way. Please let me know here when i can switch back to nightly builds.
Also, is there a procedure to just upgrade LibreELEC and leave Storage partition in place? Should i mount .img-file & just rsync everything from there to SD card? At the moment i'm doing clean reinstall everytime, but that's not very convenient...
2can Can you please test LibreELEC-A64.arm-10.0-devel-20210326183118-32b3089-pine64-plus-gpu-432-MHz.img.gz ? Only change is that GPU is now clocked at 432 MHz, which is supposed to be highest safe clock rate (nightly images run at 576 MHz and previous test image at 297 MHz). If this works, I'll open PR with fix. Please also tell how smooth/sluggish UI navigation feels.
Yes, that also works, and the UI is more responsive than the version lower-gpu-clk you've shared before
2can Please test this image: LibreELEC-A64.arm-10.0-devel-20210325222737-32b3089-pine64-plus-lower-gpu-clk.img.gz
Wow man! That works! i guess you've nailed it! I've booted and can see UI working properly for at least 10 minutes already. You rock!
Do you need any logs from me or would you just incorporate these changes into the nightly build line so i can use recent images from Index of / ?
2can I tested image on my Pine64 Plus and I could watch episodes without problems. However, I think issue might be in too high GPU frequency which may not work on all boards. I'll prepare test image with lower GPU clock speed.
Yes, please, looking forward to test it.
I cannot see any useful information in the log-file though
Hi, i've just tried again to run latest nightly image (LibreELEC-A64.arm-10.0-nightly-20210325-32b3089-pine64-plus.img) on my Pine64-plus and i'm still having just the same problem - few seconds after booting to Kodi the UI hangs and just showing random glitches when i try to use mouse or keyboard. I couldn't find anything special in the kodi.log, but i attach it here anyway. Any help greatly appreciated.
kodi.log: kodi.log
However, this should not cause your behaviour. Did you do your own builds? e.g. are you completely sure it's actually Kodi issue and not kernel update for example?
I'm not doing my own builds. Though i tried - i ran out of disk space....
I'm using most fresh images from Index of /
Why do you assume we are using issue tracker?
Anyway, for this particular issue there is bug report ([BUG] /usr/share/kodi/addons/service.libreelec.settings/oe.py/oe.py raise exception · Issue #4563 · LibreELEC/LibreELEC.tv · GitHub) but not much is happening, at least publicly.
Does that LE 10.0 label on the bug mean this would not be resolved at least until 10.0 release? Oh that's so sad....
I assumed you use issue tracker because i do.... Well, i read through that bug report and followed the link to busybox (that says it's fixed), but i don't have enough knowledge to understand what the bug is really about so i can't be of any help.... But probably if you point me in the right direction i can be useful - make a PR on github etc.
yeah, known problem. I can't say when it will be fixed, though.
Could you please share a link to a bug at whatever issue tracker you use? I'd like to subscribe or maybe i would be able to participate it fixing/testing
I tried clean install - it works until it tries to load LibreELEC addon for Kodi - then Kodi becomes glitchy and not usable
2020-10-30 14:19:39.889 T:3093 INFO <general>: Register - new cec device registered on cec->Linux: CEC Adapter (0000:0000)
2020-10-30 14:19:42.171 T:3097 FATAL <general>: ## LibreELEC Addon ## oe::MAIN(loadingModules)(strModule) ## ERROR: (SystemError('initialization of _glib raised unreported exception'))
2020-10-30 14:19:42.172 T:3097 FATAL <general>: Traceback (most recent call last):
File "/usr/share/kodi/addons/service.libreelec.settings/oe.py/oe.py", line 828, in load_modules
File "/usr/share/kodi/addons/service.libreelec.settings/resources/lib/modules/xdbus.py", line 7, in <module>
File "/usr/lib/python3.8/site-packages/gobject/__init__.py", line 26, in <module>
File "/usr/lib/python3.8/site-packages/glib/__init__.py", line 22, in <module>
SystemError: initialization of _glib raised unreported exception
2020-10-30 14:19:42.206 T:3097 INFO <general>: ## LibreELEC Addon ## system::set_hostname ## LibreELEC
2020-10-30 14:19:42.208 T:3097 INFO <general>: ## LibreELEC Addon ## system::set_keyboard_layout ## us
2020-10-30 14:19:42.208 T:3097 INFO <general>: ## LibreELEC Addon ## system::set_keyboard_layout ## loadkmap < `ls -1 /usr/lib/keymaps/*/us.bmap`
2020-10-30 14:19:42.775 T:3097 INFO <general>: ## LibreELEC Addon ## updates::updateThread ## Started
2020-10-30 14:19:42.776 T:3097 INFO <general>: ## LibreELEC Addon ## updates::set_auto_update ## auto
2020-10-30 14:19:42.868 T:3123 INFO <general>: ## LibreELEC Addon ## _service_::run ## WAITING:well, it actually boots and i can access it though ssh using default login/password, but KODI UI is not working most of the times and is full of glitches.... Is there anything i can collect (logs/debug info) and provide to you that might help to solve this?
Best regards
What you should do is to remove "quiet" and "console=tty1" from extlinux.conf file. That way you will get full output on serial.
That worked, thanks, i was able to boot now! :+1
Can't get Pine64 to boot with any of the images, i've tried so far:
LibreELEC-A64.arm-9.80-nightly-20191226-b814aab-pine64.img
LibreELEC-A64.arm-9.80-nightly-20191226-b814aab-pine64-plus.img
LibreELEC-A64.arm-9.80-nightly-20201027-b2ff85b-pine64.img
LibreELEC-A64.arm-9.80-nightly-20201027-b2ff85b-pine64-plus.imgand get the same error:
U-Boot SPL 2020.10 (Oct 27 2020 - 22:03:17 -0400)
DRAM: 1024 MiB
Trying to boot from MMC1
NOTICE: BL31: v2.2(release):9.0.0-4122-gb2ff85b191
NOTICE: BL31: Built : 21:09:46, Oct 27 2020
NOTICE: BL31: Detected Allwinner A64/H64/R18 SoC (1689)
NOTICE: BL31: Found U-Boot DTB at 0x4082bb0, model: Pine64+
NOTICE: BL31: PMIC: Detected AXP803 on RSB.
U-Boot 2020.10 (Oct 27 2020 - 22:03:17 -0400) Allwinner Technology, Build: jenkins-A64-427
CPU: Allwinner A64 (SUN50I)
Model: Pine64+
DRAM: 1 GiB
MMC: mmc@1c0f000: 0
Loading Environment from FAT... *** Warning - bad CRC, using default environment
In: serial@1c28000
Out: serial@1c28000
Err: serial@1c28000
Net: No ethernet found.
starting USB...
No working controllers found
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
177 bytes read in 4 ms (43 KiB/s)
1: LibreELEC
Retrieving file: /KERNEL
22132744 bytes read in 949 ms (22.2 MiB/s)
append: boot=UUID=2710-0237 disk=UUID=7b5b78ae-93b9-41f3-ba14-b7fef5a8c573 quiet console=ttyS0,115200 console=tty1
Retrieving file: /sun50i-a64-pine64.dtb
28165 bytes read in 4 ms (6.7 MiB/s)
Moving Image from 0x40080000 to 0x40200000, end=41780000
## Flattened Device Tree blob at 4fa00000
Booting using the fdt blob at 0x4fa00000
Loading Device Tree to 0000000049ff6000, end 0000000049fffe04 ... OK
Starting kernel ...
[ 0.210952] sun50i-de2-bus 1000000.bus: Error couldn't map SRAM to device
[ 0.211997] sun4i-usb-phy 1c19400.phy: failed to get clock usb0_phy
[ 0.408674] sun8i-dw-hdmi 1ee0000.hdmi: Couldn't get regulator
[ 0.409179] sun4i-drm display-engine: Couldn't bind all pipelines componentsAny help greatly appreciated.
The board itself is fine as i was able to boot it using Armbian_20.08.1_Pine64_buster_current_5.8.5.img image without any problems.