Posts by KRISZatHYPE

Quote from HiassofT

Well, you should have substituted /dev/videoX with the actual device node shown for your grabber (/dev/video0 in your case).

As /dev/video0 is already the default simply run v4l2-ctl -n.

so long,

Hias

My bad.

These are the results of the commands that you listed:

I got these when i entered those commands

Quote from HiassofT

That's not quite correct, from the log it looks like you forgot to enable SPI in config.txt (or set a wrong SPI device)

Code

Mar 11 20:44:42 LibreELEC sh[555]: Failed to open device('/dev/spidev0.0')

so long,

Hias

I fixed the SPI error, there was a typo in the config.txt, I fixed it but the situation is still the same, also, the grabber only produces a blank blue picture.

Thanks for replying

Krisz

When I power everything on, only the first 3 and the last LED light up, and those are faint as well

LED: APA102

Setup: TV (Sharp LC40LE810E) -> SCART -> Grabber -> Rpi4

Did wiring like this:

Hyperion log(

When I turn on everything there is no boot rainbow swirl, the lights start flashing and they only stop when i turn everything off.