Posts by ClementP

Quote from souldemo

Hello everyone.

I am an android Q + tv box owner:

Cortex-A53 quad-core H6 with Mali-T720MP2 GPU

4gb ram-32gb rom.

is my device supported?

You can try the Tanix TX6 it should be similar board.

If there is no improvement.
Could you take a High Res pictures of your PCB top and bottom?

To see if some components are different compare to my board.

Top and Bottom like those :
File:Beelink GS1 pcbtop.jpg - linux-sunxi.org
File:Beelink GS1 pcbbottom.jpg - linux-sunxi.org

Hi Piet200,

I have just installed the latest nightly and test it right now and everything works fine on my board.

Did you try with different HDMI cables? I know that I got some issues with the one provided by Beelink.

Regards,

Clement

Quote from Stilgar75

Hi, how i can install the image in a Beelink GS1?

Image is here : Index of / put it on the SDCard.

Hi sung ,

Quote from sung

i had tried 3 different hdmi cable. each tv and monitor have different hdmi cable. but still just black screen

If you plug an ethernet cable do you see any IP requested on your DHCP server?

If yes plug the SDCard to your computer open the first partition and in extlinux/extlinux.conf add "ssh" to the cmdline.

You shoud be able to ssh with root as user and libreelec as password

If no recheck that the SD card has been correctly flashed with the correct img. If it's you still have black screen the only thing you can do is solder the UART and check what is happening... (Beelink GS1 - linux-sunxi.org)

Clement

Hi sung ,

Could you try with another HDMI cable? (I had many trouble with the one provided by Beelink)

FYI I just tested the "LibreELEC-H6.arm-9.80-nightly-20200222-e49037d-beelink-gs1.img.gz" with LibreELEC USB-SD and everything works fine.

Clement

Hi vitalogy

I'm trying to make the BT works on the RTL8822BS of my Beelink GS1 did you give it a try already ?

EDIT: I have extracted the fex file for the Tanix TX6 but it seems that a wlan_en gpio is defined but not used for the Wi-Fi: h6: add Tanix TX6 board by clementperon · Pull Request #67 · linux-sunxi/sunxi-boards · GitHub

Thanks,

Clément