You don't need video editor (it will probably do some re-encoding, which is highly undesirable in this case), just use dd or something similar. dd command would look like:
dd if=inputvideo.m2ts of=sample.m2ts bs=1M count=50
i did it!!!))
Posts by ilchenko
-
-
You don't need video editor (it will probably do some re-encoding, which is highly undesirable in this case), just use dd or something similar. dd command would look like:
dd if=inputvideo.m2ts of=sample.m2ts bs=1M count=50
You just never believe me, but I was just reading now that all the editors are transcoding the video after the split and our whole idea just collapses))))
thx for command!!! it changes the business))
-
Here is the relevant PR if you want to build it yourself: Allwinner: Fix USB3 support by jernejsk · Pull Request #3730 · LibreELEC/LibreELEC.tv · GitHub
Oh, thank you!) But I always have trouble with the patches. I just don't know how to install them))) So I guess I'll wait for your image.)
As I said, I can look into that if I have a sample which triggers the issue. Torrents are not allowed here and I really don't want to have 60 GiB sample. Video files are usually still playable if you cut them at arbitrary length, so why don't you just copy about 50 MiB of that video file and send me a link over private message?
Okay! No editor to cut with. I will try to install some and send the file to you
-
ilchenko Fix for USB3 is prepared. I will probably open PR later this day, just have to test it on all H6 boards I have.
Good news!) Thx for fast reaction!
PS if the BD-remux had been a little fix, then I'd be completely happy))))
-
Green screen means that driver crashed HW and from that point on, all movies coded with same codec, will be played as green. I suppose there is an issue, just not with this particular video.
i can attach torrent of bd remux if it's possible here
MOD: attachment removed
-
I'll take a look.
This one works for me just fine (OrangePi 3, 1 GiB of RAM).
You surprised me and I decided to check again. What I found out. I sent you a screensaver file from BD-remux. And if you go to the BD-remux folder and run the file directly with a clean board load, the file is played. But if you run either by clicking the play button on the folder or by running the main movie file, which weighs 60GB, everything will be green. I even recorded the video as it happens to make it clear.
-
yes, clearly a ffmpeg or Cedrus driver problem, but as I answered to any "playback issue" post, give me the short sample, which exhibits the issue.
sample
-
Hi!
With the last image stopped working 4 USB ports on the end of the board. Only side port 3.0 works. I thought the chip burned, but when I put the last Armbian image in it all works fine.
yes, clearly a ffmpeg or Cedrus driver problem, but as I answered to any "playback issue" post, give me the short sample, which exhibits the issue.
I'll be sending you a sample video shortly. Because for 65" I would like to use 4k BD-remux format, but it does not show correctly. The sound is coming, but the video is a solid green screen.
Thx!
-
if play 4k BD-remux with hardware acceleration there's sound, but no video just a green screen
if turn off hardware acceleration, the video appears but you can't watch it because it slows and lags without acceleration.
-
and one more problem i found. I think this bug by CEC adapter. If press forward button too fast then finely video freezes as still image but the timer keeps going anyway. If after this press stop button then board hangs up and has to reboot only. And since I use Orange Pi 3 as a media center, and often rewind videos, it happens all the time. What i need to do? Increase the delay of pressing again in the settings?
increase delay for second tap up to 650ms, situation a little better but not fine
-
and one more problem i found. I think this bug by CEC adapter. If press forward button too fast then finely video freezes as still image but the timer keeps going anyway. If after this press stop button then board hangs up and has to reboot only. And since I use Orange Pi 3 as a media center, and often rewind videos, it happens all the time. What i need to do? Increase the delay of pressing again in the settings?
-
You didn't say which board or SoC. Only H6 is capable of that. Of course support for that is planned for H6, but I can't say when.
I have Orange Pi 3 with H6
Which board and what is the resolution of the TV?
4k on TV
-
And one more question. Will there be support for 4k 60Hz? Because a few addons that give a stream at 60Hz at a resolution of 4k 30Hz incorrectly synchronize video and audio track. It turns out that you need to go down to 1920x1080 60Hz to display everything correctly.
-
Can u try a different hdmi cable?
I haven't tried it, but I've already read on the forums that the guys changed three wires and didn't help
I have an expensive 2.0a cable
-
Hey, guys. Caught a weird bug. Appears only when watching a movie or video. A few seconds after watching a movie or video, the screen turns black. If you pull the hdmi cable out and back, the colors are all green and can only be treated by turning off the TV completely and turning on the TV. But after some time after watching it all repeats again. If you don't watch the video but just navigate through the menu, it never happens. What can it be?
-
Hey, guys!
Has anyone installed Plex Media Server on LibreELEC? Is that even possible?
-
Install tnds82 repository to my libreelec 18.3 with Orange Pi 3 and cant connect to repository. This poject dead?
-
Not ATM, I don't have HW at hand over the weekend. Quick google search found this Possible to disable Kodi's CEC "power on" signal to TV?
Thx my friend) Sorry for distrub Ill try to find.
