WinSCP I can not seem to find any addons
I think WinSCP hides folders that start with a point, so you need to change the settings to show it.
Posts by CvH
-
-
No 3D mvc support and no HDR after over one year.
Better don't compare it to Rockchip, Amlogic or Allwinner - they needed 4+ years and are partly not even there yet (AML had 6 years and it is not even close).
You could rephrase it, RPi got 4 times more done then the others in the same amount of time.
-
tx this time it worked
tbh I can't see the fps issues (I am rather picky and usually see those stuff), can you point me to the timestamps where it happens ?
-
Though to be fair interlaced MPEG2 isn't a legacy format
RE: LE10 & deinterlacing in RPi4
[…]
Hi , Just tested 9.95.2 and found out that de-interlacing is not available yet. (Clearly "alpha" fits the description )
I just want to make sure you know de-interlacing is Top priority for PVR usage (and even playing old DVDs).
Not only without de-interlacing the playback is jaggy we are viewing it half fps which make a lot of content unwatchable.
While saying that keep up the great work and hoping to se de-interlacing support gets bumped up (I can help with testing if needed).
-
Here's a video
http error 403, I think because zippyshare is blocking several locations
-
if I recall correctly there are no proper device trees for the rockbox upstream and nobody has a rockbox from us to verify blind changes actually work.
knaerzche should be able to help
-
I'm planning to migrate the fan-driver of pentasata package
libgpiod might be a idea too, its universal and works at RPi , Allwinner and whatnot
if you try to build a single package
PROJECT=RPi ARCH=arm DEVICE=RPi4 scripts/build package_name
if you share your changes it is likely easier to help
a addon sounds reasonable, also don't require manual steps
-
Hyperion Forum says "LE must fix this" ...
We can only fixing it with reverting to the old playback engine that is not supported anymore from RPi and doesn't allow all the good stuff (HDR, smooth playback ..) that is introduced into standard linux.
And no, switching to X11 is no solution either because this would rule out the "good stuff".
As long they don't support the "new standard" there is not much we can do. Tbh I have no idea if it will work at all.
Saying the following without knowing exactly the current situation at hyperion.
Likely HDR etc are going to make it even harder, so likely a external solution (HDMI splitter + framegrabber) is likely the better way today.
-
can you make a video while the problem appears ?
just to make sure we are looking for the same problem
-
if your channels require widevine then no, other possibilities are DVB or IP TV
just be aware, RPi1 is really low end so your experience might be bad regardless
-
seems I have a hardware comparability problem with the new motherboard??
I would bet some Bios setting could fix it. Typically there should be some PCIe related settings you can adjust.
-
you can also use the Windows network share of your box, there is a update folder too
-
maybe I missed it at the log but it looks like the kernel does not see the pcie device at all
did you used the same pc for LE9.2 before ?
could you check if it still works for 9.2 ? -
So no way to extend libreElec.
after a quick look I think there should be everything there already
they ship some python scripts and install a kitchen sink of depends from pip
install the driver from radxa
they install
https://s3.setq.io/rockpi/deb/rockpi-penta-0.10.deb the fan.py
https://s3.setq.io/rockpi/pypi/Adafruit_SSD1306-v1.6.2.zip the driver ?
and make some changes at the pin output
The "driver" is already there LibreELEC.tv/packages/addons/addon-depends/adafruit-libraries-depends/Adafruit_Python_SSD1306 at master · LibreELEC/LibreELEC.tv · GitHub so likely it should just some copy/paste needed to have it working. Not sure if anything else is missing.
just the oled.py looks fishy, but nothing that can't be done I think
-
WIFY is not working at all
dmesg | paste at the shell might show us some hint
-
I tried to build a libreElec from git - but download-tool fails with
you don't need to run the download tool
all necessary stuff gets downloaded while you build it, so you don't download kmscube if you build generic for example
-
latest tar file to update (or img.gz if you want to write a fresh sd card)
just to clarify you can also update with img.gz, regardless what file (*.tar or `.img.gz) you throw into the update folder it updates LE
-
I found 49 different Super Mario All-Stars ROMs
So pls share the exact name of the file you use.
