Posts by Da Flex

  • [RPi5] Strange Display After Booting

    Your RPi5 has new graphics hardware, which isn't supported at LE 12.0.1:

    Thread

    [RPI5] Fresh install issues

    Hello,

    I do need some support. After some issues with a movie on my old setup (RPI3 with Kodi 18) I decided to upgrade my two existing setups (Onother was an Odroid C2, lol)

    I had two RPI4 and one of them not in use, so I just used the LE USB creator and it worked out of the box. Initial setup was with a mikro-HDMI adapter to a HDMI-to-DVI cable on my monitor setup, then it went to my FHD TV. So far so good.

    Now, I tried to install a fresh RPI5 but it stucks. Seems anything with graphics is…
    Gregor84
    November 27, 2024 at 11:58 AM

    Try the latest LE 12 nightly build. If the problem remains, post a log from that build:

    Please provide a full debug log.

    How to post a log (wiki)

    1. Enable debugging in Settings>System Settings>Logging
    2. Restart Kodi
    3. Replicate the problem
    4. Generate a log URL (do not post/upload logs to the forum)

    use "Settings > LibreELEC > System > Paste system logs" or run "pastekodi" over SSH, then post the URL link

  • [x86-64] MCE Remote Not Stable

    Probably one of those fake MCE remotes. You already had this problem with LE 11.95.1:

    Thread

    MCE remote no longer working

    Hi All,

    I recently installed the latest LE beta 11.95.1. On first boot my HP MCE remote was working fine. However, after rebooting it no longer works. I have tried rebooting a few times but cannot get it to work. The receiver is flashing red on button presses, however LE does not respond. Although, if I press the power button on the remote it tries to put the system to sleep, so there is some kind of communication happening.

    I have tried the Keymap Editor add-on but it does not recognise button…
    Blueman
    April 4, 2024 at 5:03 AM
    Quote from Blueman

    Apologies for the delay. Here is a link to the latest log files on a clean install showing the directional presses working but not the OK button.

    https://paste.libreelec.tv/decent-mustang.log

    LE does the job:

    Code
    Nov 26 06:36:23.833284 LibreELEC kernel: Registered IR keymap rc-rc6-mce
...
Nov 26 06:36:23.886527 LibreELEC kernel: IR RC6 protocol handler initialized

    Because your log looks good now, I think it's a hardware issue with your (fake) MCE remote.

  • [Orange Pi 3] 768kHz Sample Rate on Topping E30 II Lite

    Here are some specs:

    E30 II lite - TOPPING AUDIO

    It only needs the ASIO driver. That driver is used by many audio interfaces, and available for Linux since a long time. I doubt it misses features.

    It supports 768kHz in 32 bit PCM mode, and that's transmitted over S/PDIF (IEC958) (not PCM):

    Code
    m_displayName     : E30 II Lite
m_displayNameExtra: S/PDIF
m_deviceType      : AE_DEVTYPE_IEC958

    So maybe something goes wrong with IEC958 to PCM conversion.

  • [Orange Pi 3] 768kHz Sample Rate on Topping E30 II Lite

    We had a similar issue here:

    Thread

    Raspberry Pi 4 + LibreElec + Music Player Daemon + WavPack DSD

    Hello! :)

    I installed LibreElec 9.95.1 and mpd (as service addon) and found that when playing WavPack DSD files with a samplerate of more than 384 kHz, the sound is very interrupted. A search on the Internet did not give anything, the mpd settings also did not bring any result. And then I accidentally looked into:

    mpd -V

    ­— and found that it was built without native support for the WavPack format, that is, it decodes it using ffmpeg. And ffmpeg DOES NOT RECOGNIZE DSD compressed with WavPack.



    In…
    greenvorbisfan
    June 29, 2021 at 3:05 PM

    So maybe the Linux driver is capable, but MPD still needs the update from RPi.

  • pi not seeing my new ssd

    Latest post from mglae is here:

    Thread

    Improving ntfs3 kernel mount

    As further follow up to my post here is an improved mount.ntfs script using ntfs-3g.probe and ntfsfix for fixing simple "dirty flag" issues.

    This is experimental. If you are willing to test install the attached addon from ZIP on your LE12 or LE13 system.

    If there are issues provide a system log, minimal with journalctl -u 'udevil-mount@*'|paste or a complete log via LE addon.

    12.0.0.1 - avoid error on shutdown
    12.0.0.0 - initial version
    mglae
    November 27, 2024 at 6:43 PM

  • pi not seeing my new ssd

    Quote from AWBC1

    just curious how would I go about that because I transfer a lot of media files from windows to this drive, is there a way to format it as ext4 on windows?
    The Drive I had before was formatted in ntfs and it worked completely fine

    I didn't know you've already copied data. Before formatting to ext4, or providing a debug log, you can try the brand new NTFS-3G add-on. Maybe that's enough to solve your problem. Details here:

    Thread

    Usb Hard drive not recongize since 11.0.4

    Hi,

    my external hard drive is not recognize on libreelec since 11.0.4 version. I install 11.0.5 and still the same issue.

    I don't know why because it works on previous versions and other os like osmc.

    Do someone has an idea to help me?

    thx
    astroboye
    January 23, 2024 at 9:48 AM

  • [RPi4] Kodi Crash and Kernel Panic

    This could be the cause:

    Code
    2024-11-23 20:49:49.747 T:1158    error <general>: AddOnLog: pvr.hts: Command getDiskSpace failed: Unable to stat path
2024-11-23 20:49:49.747 T:1158    error <general>: GetDriveSpace: Add-on 2025648334 returned an error: server error

    We already had this error in another thread. Not sure whether it's related or harmless:

    Post

    RE: EPG data disappearing

    ERROR: AddOnLog: Tvheadend HTSP Client: pvr.hts - Command getDiskSpace failed: Unable to stat path
    it complains that some file could not be found due false path - good question whats wrong here

    1. could be that you set the wrong folder for recordings in tvh !?

    2. pls post the /storage/.kodi/userdata/addon_data/pvr.hts/settings.xml - after that pls remove it and reboot (reconfigure the pvr.hts addon)

    every error looks like some problem server side - did you a clean tvheadend 42 or is it some…
    CvH
    June 11, 2016 at 8:34 AM

    Suggestion: Use ext4 file system on your recording device.