Ok thanks, I'll try it and send the TerraTec back...
I hope it works...
I will report if it's working.
Thanks for your help!
Posts by daniel50123
-
-
-
Ok i saw a review form the 24. April 2018 and he says he has it running without problems on raspian/tvheadend (thats exactly what i want)
with the Rev.2, so i think it should work so the only question is how to get CI working? (need it for the ORF programs in Austria)
What CI reader does work with raspbian/tvheadend?
thanks
-
ok thanks, then i will send it back!
I saw one that seems to be supported, as i could take it from the reviews?
but they all buyed the non-CI version (but the V2) of it but i need one with CI
so does this Works?
It is this Device: https://www.amazon.de/dvbsky-s960c-dvb-s2-common-interface/dp/b07cj4bjz5/ref=cm_cr_arp_d_pdt_img_top?ie=utf8
-
Hi!
I am new here, i have a RaspberryPi 2 with Tvheadend running and buyed a TerraTec S7 rev.4 (newest)
now i wanted to install the Driver but i seems that the linux driver page is down (linux.terratec.com)
On linuxtv its not listed at all https://www.linuxtv.org/wiki/index.php/terratec_s7 (only 1,2 and 3)
What i found out that it seems the hardware of the rev.4 is totally different as on the older revisions?
I think its from dvbsky, because terratec is only a reseller.
Is it even supported by linux?
dmesg | grep dvb does not find anything
but dmesg | grep TERRATEC shows me:
Code[ 2.153267] usb 1-1.4: Product: TERRATEC S2 CI USB [ 2.153277] usb 1-1.4: Manufacturer: TERRATECand full output of dmesg:
Code
Display More[ 0.000000] Booting Linux on physical CPU 0xf00 [ 0.000000] Linux version 4.14.49-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1120 SMP Wed Jun 13 17:08:38 BST 2018 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 2 Model B Rev 1.1 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 8 MiB at 0x3ac00000 [ 0.000000] On node 0 totalpages: 242688 [ 0.000000] free_area_init_node: node 0, pgdat 80c84fc0, node_mem_map ba3a1000 [ 0.000000] Normal zone: 2133 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 242688 pages, LIFO batch:31 [ 0.000000] percpu: Embedded 17 pages/cpu @ba34b000 s38720 r8192 d22720 u69632 [ 0.000000] pcpu-alloc: s38720 r8192 d22720 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 240555 [ 0.000000] Kernel command line: bcm2708_fb.fbwidth=720 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait quiet splash plymouth.ignore-serial-consoles [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 940244K/970752K available (7168K kernel code, 575K rwdata, 2072K rodata, 1024K init, 706K bss, 22316K reserved, 8192K cma-reserved) [ 0.000000] Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xbb800000 - 0xff800000 (1088 MB) lowmem : 0x80000000 - 0xbb400000 ( 948 MB) modules : 0x7f000000 - 0x80000000 ( 16 MB) .text : 0x80008000 - 0x80800000 (8160 kB) .init : 0x80b00000 - 0x80c00000 (1024 kB) .data : 0x80c00000 - 0x80c8feb4 ( 576 kB) .bss : 0x80c96f40 - 0x80d478b4 ( 707 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 25253 entries in 75 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000010] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000023] Switching to timer-based delay loop, resolution 52ns [ 0.000334] Console: colour dummy device 80x30 [ 0.000356] console [tty1] enabled [ 0.000387] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [ 0.000406] pid_max: default: 32768 minimum: 301 [ 0.000807] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000827] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002020] Disabling memory control group subsystem [ 0.002153] CPU: Testing write buffer coherency: ok [ 0.002739] CPU0: update cpu_capacity 1024 [ 0.002752] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00 [ 0.003336] Setting up static identity map for 0x100000 - 0x10003c [ 0.003517] Hierarchical SRCU implementation. [ 0.004471] smp: Bringing up secondary CPUs ... [ 0.005535] CPU1: update cpu_capacity 1024 [ 0.005547] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01 [ 0.006721] CPU2: update cpu_capacity 1024 [ 0.006732] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02 [ 0.007864] CPU3: update cpu_capacity 1024 [ 0.007874] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03 [ 0.008021] smp: Brought up 1 node, 4 CPUs [ 0.008036] SMP: Total of 4 processors activated (153.60 BogoMIPS). [ 0.008043] CPU: All CPU(s) started in HYP mode. [ 0.008048] CPU: Virtualization extensions available. [ 0.009234] devtmpfs: initialized [ 0.021351] random: get_random_u32 called from bucket_table_alloc+0xfc/0x24c with crng_init=0 [ 0.022211] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.022537] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.022563] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.023373] pinctrl core: initialized pinctrl subsystem [ 0.024476] NET: Registered protocol family 16 [ 0.027699] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.033887] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.033900] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.034156] Serial: AMBA PL011 UART driver [ 0.036378] bcm2835-mbox 3f00b880.mailbox: mailbox enabled [ 0.077789] bcm2835-dma 3f007000.dma: DMA legacy API manager at bb813000, dmachans=0x1 [ 0.079678] SCSI subsystem initialized [ 0.079998] usbcore: registered new interface driver usbfs [ 0.080071] usbcore: registered new interface driver hub [ 0.080280] usbcore: registered new device driver usb [ 0.090412] raspberrypi-firmware soc:firmware: Attached to firmware from 2018-06-07 15:31 [ 0.092185] clocksource: Switched to clocksource arch_sys_counter [ 0.179322] VFS: Disk quotas dquot_6.6.0 [ 0.179446] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.179699] FS-Cache: Loaded [ 0.180008] CacheFiles: Loaded [ 0.192898] NET: Registered protocol family 2 [ 0.193897] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.194029] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.194217] TCP: Hash tables configured (established 8192 bind 8192) [ 0.194401] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.194463] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.194796] NET: Registered protocol family 1 [ 0.195482] RPC: Registered named UNIX socket transport module. [ 0.195491] RPC: Registered udp transport module. [ 0.195496] RPC: Registered tcp transport module. [ 0.195503] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.197374] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 0.201233] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 0.211749] FS-Cache: Netfs 'nfs' registered for caching [ 0.212706] NFS: Registering the id_resolver key type [ 0.212758] Key type id_resolver registered [ 0.212765] Key type id_legacy registered [ 0.212784] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.215582] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.215781] io scheduler noop registered [ 0.215791] io scheduler deadline registered (default) [ 0.216171] io scheduler cfq registered [ 0.216180] io scheduler mq-deadline registered [ 0.216187] io scheduler kyber registered [ 0.218425] BCM2708FB: allocated DMA memory fad00000 [ 0.218469] BCM2708FB: allocated DMA channel 0 @ bb813000 [ 0.229972] Console: switching to colour frame buffer device 90x30 [ 0.238541] bcm2835-rng 3f104000.rng: hwrng registered [ 0.238699] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) [ 0.239349] vc-sm: Videocore shared memory driver [ 0.239759] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000 [ 0.254232] brd: module loaded [ 0.266086] loop: module loaded [ 0.266103] Loading iSCSI transport class v2.0-870. [ 0.266998] libphy: Fixed MDIO Bus: probed [ 0.267130] usbcore: registered new interface driver lan78xx [ 0.267211] usbcore: registered new interface driver smsc95xx [ 0.267233] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 0.495503] Core Release: 2.80a [ 0.495516] Setting default values for core params [ 0.495559] Finished setting default values for core params [ 0.695888] Using Buffer DMA mode [ 0.695898] Periodic Transfer Interrupt Enhancement - disabled [ 0.695904] Multiprocessor Interrupt Enhancement - disabled [ 0.695913] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 0.695928] Dedicated Tx FIFOs mode [ 0.696447] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xbad14000 dma = 0xfad14000 len=9024 [ 0.696480] FIQ FSM acceleration enabled for : Non-periodic Split Transactions Periodic Split Transactions High-Speed Isochronous Endpoints Interrupt/Control Split Transaction hack enabled [ 0.696489] dwc_otg: Microframe scheduler enabled [ 0.696561] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x805e7cb0 [ 0.696574] WARN::hcd_init_fiq:460: FIQ ASM at 0x805e8018 length 36 [ 0.696589] WARN::hcd_init_fiq:486: MPHI regs_base at 0xbb87e000 [ 0.696664] dwc_otg 3f980000.usb: DWC OTG Controller [ 0.696709] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1 [ 0.696780] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000 [ 0.696831] Init: Port Power? op_state=1 [ 0.696837] Init: Power Port (0) [ 0.697144] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.697158] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.697169] usb usb1: Product: DWC OTG Controller [ 0.697179] usb usb1: Manufacturer: Linux 4.14.49-v7+ dwc_otg_hcd [ 0.697189] usb usb1: SerialNumber: 3f980000.usb [ 0.698023] hub 1-0:1.0: USB hub found [ 0.698084] hub 1-0:1.0: 1 port detected [ 0.698810] dwc_otg: FIQ enabled [ 0.698818] dwc_otg: NAK holdoff enabled [ 0.698824] dwc_otg: FIQ split-transaction FSM enabled [ 0.698837] Module dwc_common_port init [ 0.699186] usbcore: registered new interface driver usb-storage [ 0.699459] mousedev: PS/2 mouse device common for all mice [ 0.699545] IR NEC protocol handler initialized [ 0.699551] IR RC5(x/sz) protocol handler initialized [ 0.699557] IR RC6 protocol handler initialized [ 0.699563] IR JVC protocol handler initialized [ 0.699569] IR Sony protocol handler initialized [ 0.699575] IR SANYO protocol handler initialized [ 0.699581] IR Sharp protocol handler initialized [ 0.699587] IR MCE Keyboard/mouse protocol handler initialized [ 0.699593] IR XMP protocol handler initialized [ 0.700526] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer [ 0.700834] bcm2835-cpufreq: min=600000 max=900000 [ 0.701286] sdhci: Secure Digital Host Controller Interface driver [ 0.701293] sdhci: Copyright(c) Pierre Ossman [ 0.701744] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe [ 0.701885] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.702689] ledtrig-cpu: registered to indicate activity on CPUs [ 0.702834] hidraw: raw HID events driver (C) Jiri Kosina [ 0.702996] usbcore: registered new interface driver usbhid [ 0.703002] usbhid: USB HID core driver [ 0.703777] vchiq: vchiq_init_state: slot_zero = bad80000, is_master = 0 [ 0.705497] [vc_sm_connected_init]: start [ 0.714461] [vc_sm_connected_init]: end - returning 0 [ 0.715186] Initializing XFRM netlink socket [ 0.715220] NET: Registered protocol family 17 [ 0.715348] Key type dns_resolver registered [ 0.715831] Registering SWP/SWPB emulation handler [ 0.716686] registered taskstats version 1 [ 0.724145] uart-pl011 3f201000.serial: cts_event_workaround enabled [ 0.724250] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2 [ 0.724319] console [ttyAMA0] enabled [ 0.726775] sdhost: log_buf @ bad13000 (fad13000) [ 0.802228] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1) [ 0.803556] of_cfs_init [ 0.803677] of_cfs_init: OK [ 0.804504] Waiting for root device /dev/mmcblk0p2... [ 0.912335] Indeed it is in host mode hprt0 = 00021501 [ 0.980798] mmc0: host does not support reading read-only switch, assuming write-enable [ 0.984247] mmc0: new high speed SDHC card at address aaaa [ 0.985026] mmcblk0: mmc0:aaaa SU08G 7.40 GiB [ 0.986996] mmcblk0: p1 p2 [ 1.003713] random: fast init done [ 1.014305] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.014375] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 1.015373] devtmpfs: mounted [ 1.019159] Freeing unused kernel memory: 1024K [ 1.122258] usb 1-1: new high-speed USB device number 2 using dwc_otg [ 1.122436] Indeed it is in host mode hprt0 = 00001101 [ 1.362590] usb 1-1: New USB device found, idVendor=0424, idProduct=9514 [ 1.362620] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.363570] hub 1-1:1.0: USB hub found [ 1.363678] hub 1-1:1.0: 5 ports detected [ 1.577623] systemd[1]: System time before build time, advancing clock. [ 1.682260] usb 1-1.1: new high-speed USB device number 3 using dwc_otg [ 1.738821] NET: Registered protocol family 10 [ 1.740535] Segment Routing with IPv6 [ 1.758909] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.787460] random: systemd: uninitialized urandom read (16 bytes read) [ 1.802613] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 1.803454] systemd[1]: Detected architecture arm. [ 1.812687] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00 [ 1.812703] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.815627] smsc95xx v1.0.6 [ 1.819225] systemd[1]: Set hostname to <raspberrypi>. [ 1.875139] random: systemd: uninitialized urandom read (16 bytes read) [ 1.918584] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:63:08:d7 [ 1.924132] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read) [ 1.942119] uart-pl011 3f201000.serial: no DMA platform data [ 2.012250] usb 1-1.4: new high-speed USB device number 4 using dwc_otg [ 2.153238] usb 1-1.4: New USB device found, idVendor=0ccd, idProduct=10a6 [ 2.153256] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.153267] usb 1-1.4: Product: TERRATEC S2 CI USB [ 2.153277] usb 1-1.4: Manufacturer: TERRATEC [ 2.153288] usb 1-1.4: SerialNumber: 20130903 [ 2.668230] systemd[1]: hciuart.service: Cannot add dependency job, ignoring: Unit hciuart.service is masked. [ 2.668610] systemd[1]: raspberrypi-net-mods.service: Cannot add dependency job, ignoring: Unit raspberrypi-net-mods.service is masked. [ 2.668788] systemd[1]: dhcpcd.service: Cannot add dependency job, ignoring: Unit dhcpcd.service is masked. [ 2.678328] systemd[1]: Listening on udev Control Socket. [ 2.679189] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 2.679537] systemd[1]: Listening on RPCbind Server Activation Socket. [ 2.680742] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 2.888168] EXT4-fs (mmcblk0p2): warning: mounting fs with errors, running e2fsck is recommended [ 2.896598] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 2.902356] usb 1-1.5: new high-speed USB device number 5 using dwc_otg [ 3.035674] usb 1-1.5: New USB device found, idVendor=174c, idProduct=55aa [ 3.035764] usb 1-1.5: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 3.035776] usb 1-1.5: Product: USB 3.0 Device [ 3.035786] usb 1-1.5: Manufacturer: Intenso [ 3.035797] usb 1-1.5: SerialNumber: 30700000000000003DB7 [ 3.037002] usb-storage 1-1.5:1.0: USB Mass Storage device detected [ 3.063091] usb-storage 1-1.5:1.0: Quirks match for vid 174c pid 55aa: 400000 [ 3.073276] scsi host0: usb-storage 1-1.5:1.0 [ 3.191103] systemd-journald[95]: Received request to flush runtime journal from PID 1 [ 3.822442] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 3.833423] bcm2835_alsa bcm2835_alsa: card created with 8 channels [ 4.153933] scsi 0:0:0:0: Direct-Access Intenso USB 3.0 Device 0 PQ: 0 ANSI: 6 [ 4.340960] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 4.566166] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 4.566415] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 6.449984] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 6.451587] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1 [ 8.399450] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 8.399469] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 8.400094] sd 0:0:0:0: [sda] Write Protect is off [ 8.400109] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 [ 8.400716] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.425842] sda: sda1 [ 8.432818] sd 0:0:0:0: [sda] Attached SCSI disk [ 9.021901] fuse init (API version 7.26) [ 10.363627] random: crng init done [ 10.363651] random: 7 urandom warning(s) missed due to ratelimiting [ 12.206000] Bluetooth: Core ver 2.22 [ 12.206124] NET: Registered protocol family 31 [ 12.206134] Bluetooth: HCI device and connection manager initialized [ 12.206162] Bluetooth: HCI socket layer initialized [ 12.206178] Bluetooth: L2CAP socket layer initialized [ 12.206227] Bluetooth: SCO socket layer initialized [ 12.595532] Adding 102396k swap on /var/swap. Priority:-2 extents:2 across:2134012k SSFSSeems that is not recognized right, what should i do?
Tested on WIN7, worked perfectly...
I hope anyone can help me, because otherwise I will return it...
Thanks for your help!
regards,
Daniel