Posts by Kupo91

Quote from 5schatten

can you try this before you downgrade & before you blacklist snd_soc_skl

LibreELEC:~ # snd_soc_skl
-sh: snd_soc_skl: not found

log-2019-03-26-15.39.53.zip

Quote from 5schatten

mkdir -p /storage/.config/firmware
wget dfw_sst.bin -P /storage/.config/firmware/
reboot

LibreELEC:~ # mkdir -p /storage/.config/firmware
LibreELEC:~ # wget http://milhouse.libreelec.tv/other/dfw_sst.bin -P /storage/.config/firmware/
Connecting to milhouse.libreelec.tv (138.68.75.163:80)
dfw_sst.bin          100% |*********************************************************************************************************************************************************************************************| 24772  0:00:00 ETA
LibreELEC:~ # reboot

log-2019-03-26-15.46.45.zip

Quote

Also I guess your filename is completely wrong. Rename it to storage-roms-ps2.mount and enable it again.

Okay but where is the difference to my file name

Quote

But before enter systemctl disable /storage/.config/system.d/x2dps2.mount.mount or whatever the name was to disable the wrong config.

Also the other mount file which was created by this process? The one in multi-user.target.wants folder storage-.config-system.d-multi\x2duser.target.wants-storage\x2droms\x2dps2

Quote from 5schatten

The best would be if you could try both & upload a full log set after each reboot

Oh didnt see that. Ye I already reverted the upgrade but I can do it once again

Quote from 5schatten

What's the output of

ls /var/media/SPIELE/PlayStation2/Roms
ls /storage/roms/ps2

Are your games listed in the second one?

first one yes, second one no

Quote from 5schatten

Post the content of the file

[Unit]
Description=mount service
Before=kodi.service
[Mount]
What=/var/media/SPIELE/PlayStation2/Roms
Where=/storage/roms/ps2
[Install]
WantedBy=multi-user.target

Quote from 5schatten

revert to the last build

Simply place LibreELEC-Generic.x86_64-9.1-RR-20190314-bdc55bc.tar in the update folder?

Quote from 5schatten

Did you reboot the system?

Yes

Quote from 5schatten

Logfiles

log-2019-03-26-14.41.54.zip

5schatten Since last update I have no sound anymore. Audio output is grayed out and shows Default, Bluetooth Audio (PULSEAUDIO)

Thanks to both of you but it still doesnt work. Putty says it successfully created the symlink

LibreELEC:~ # systemctl enable /storage/.config/system.d/storage-roms-ps2.mount
Created symlink /storage/.config/system.d/multi-user.target.wants/storage-roms-ps2.mount → /storage/.config/system.d/storage-roms-ps2.mount.

but if I open the file manager or ES there is no link

Quote from 5schatten

You can edit the fstab file but first you have to enable rw for this partition. But I would prefer the system.d variant. You have to run systemctl enable /storage/.config/system.d/xyz.mount and reboot to enable this mount

Also it should be /storage/roms/ps2 since Linux is case sensitive. Roms is not the same as roms

Thank you But I got this from putty:

LibreELEC:~ # systemctl enable /storage/.config/system.d/storage-roms-ps2.mount
The unit files have no installation config (WantedBy, RequiredBy, Also, Alias
settings in the [Install] section, and DefaultInstance for template units).
This means they are not meant to be enabled using systemctl.
Possible reasons for having this kind of units are:
1) A unit may be statically enabled by being symlinked from another unit's
.wants/ or .requires/ directory.
2) A unit's purpose may be to act as a helper for some other unit which has
a requirement dependency on it.
3) A unit may be started when needed via activation (socket, path, timer,
D-Bus, udev, scripted systemctl call, ...).
4) In case of template units, the unit is meant to be enabled with some
instance name specified.

Since you cant edit the fstab file in LE I obviously have to use the system.d method that Lisko already mentioned.

So I entered the /storage/.config/system.d folder and used tmp-emulation.mount as template. I changed the content to

[Mount]
What=/var/media/SPIELE/PlayStation2/Roms
Where=/storage/Roms/ps2

then saved the file as storage-roms-ps2.mount

and rebooted. However that doesnt work. Do I have to do anything else?

Quote from 5schatten

Read again -> I've added a possible solution for example GoW starts now with german language too if I start PCSX2 with --fullboot

Ooh thank you, I will try that as soon as I fixed my other issue.

Quote from 5schatten

Maybe this is the reason why there are problems. I would mount the sd card to /storage/roms which is also a network share & push all files over ethernet on the HTPC.

So.. I just googled a bit and if I understand this right I have to enter my new mountpoint in fstab.. How am I doing this? If I just enter /etc/fstab into putty I get -sh: /etc/fstab: Permission denied as answer.

And if I got this opening I have to enter /media/SPIELE/Playstation\0402/Roms /storage/Roms/ps2 none bind 0 0 in a new line. Am I right?

Quote from 5schatten

Of your roms. Where do you have stored them and what filesystem did you use? Probably an external hard drive and you use it on Windows based systems too?

Yes. All rom files are stored on a micro sd card (128gb), which is formated in ntfs. Originally I just bought if for my TV box/NUC running LibreElec but I'm using my main pc running Windows 10 to copy new roms to it.

Quote from 5schatten

I tried Baldur’s Gate: Dark Alliance 2, GoW2, GT4, MGS3 and I could change the language for all of them. Gran Turismo 4 for example created a user profile and the language was saved too. All config files for PCSX2 are readable & writeable so if you can change the language settings for games it will work.

Hm I just tested it on my windows pc and there its also set to english as long as I dont do a full boot. Maybe its just a bug in pcsx2. I have read a post from a few years ago where somebody wrote that some specific games have this issue. So for now I have to accept it how it is. Thank you anyway

5schatten

Quote

Well I guess your file permissions were improper set or something. I made some tests and never ran into any comparable problems.

What file permissions? How should I have done this? I just made a fresh install. And what tests have you made? Launching a rom outside the standard path with or without symlink?

Quote

If it comes to the game language you have ofc to use games that support multiple languages. Also you have to configure the PS2 bios properly too where you can change the language to German. PCSX2 itself won't change it's language because they're not included neither in LibreELEC nor the Docker Arch Linux image.

The game has multi languages how else could I have boot it in german when I chose full boot.

I just booted the bios.. and it is set to german. I also tested a different game but same result. Full boot -> german, fast boot -> english.

Sorry if I understand you wrong but PCSX2 isnt included in LE too. You added it. And the Langs folder is usually stored in the pcsx2 config folder together with those ini files etc. If pcsx2 can read those ini files why shouldnt that work with the Langs folder too?

Lisko Thanks for your help

Quote from Lisko

Also for san andreas on ps2 started in English but after a full iso boot the ps2 bios asked me language and date time settings and for subsequent starts it remembered the choices, I have only tested on san andreas though.

Unfortunatelly this doesnt work for me. I already did this and just tried it a second time. However if I do a full iso boot it doesnt even ask me about the language and date time anymore. It directly boots into the settings I made. So everything is fine this way. However if I quit this game and then boot it via fast load its english again.. Maybe its game specific.

Quote from Lisko

For networking launching games I created a new nfs share on my nas named "roms" and recreated the same directory structure found in /storage/roms and then mounted the share directly over /storage/roms using systemd mount file. Pcsx2 dolphin ppsspp fba... All working.

Sounds complicated, can you describe what you typed in? However I like my folder structure (games -> platforms -> roms, artworks, savegames), hope that I can keep it.

5schatten Isnt it possible to create a file inside the config folder from which the pcsx2 image reads the standard path and Langs folder?

Using a symlink doesnt work Q.Q my link must be correct because both ES and RCB show me the games in their lists. However launching them ends in the error message.

This is my original path:

/var/media/SPIELE/PlayStation 2/Roms

That was my symlink:

ln -s /var/media/SPIELE/'PlayStation 2'/Roms /storage/roms/ps2

And thats what my rom path in my config files of ES and RCB looks like:

/storage/roms/ps2/Roms

Strange that GOW2 asks you what language to use. If I launch NfS MW it only asks me if I do a "Boot ISO full". However starting it via frontend it seems to use "Boot ISO fast" where I dont get this question.

Quote from 5schatten

https://wiki.debian.org/symlink

Thank you that has been my plan b. Just thought that I can also change the rom path in a certain file or so. But thats okay too.

Another question that I have is can I change the language in pcsx2? Because multi language games always start in english. In language options there is only english available. The PCSX2_ui.ini file says that the Langs folder is in /usr/bin/Langs. So i wanted to take a look but putty says there is no such directory. Then I copied the Langs folder of my pcsx2 win version into the pcsx2 config folder and changed the path in the ini file. However if I start pcsx2 it automatically changes the path back to /usr/bin/Langs again xD

Since pcsx2 is running again (was it just a docker update?), back to your question:

Quote from 5schatten

So have you tried to place the ISO in the standard path /storage/roms/ps2 rename it to Grandia2.iso and ran the game?

That just fixed it...!!! The name was okay but the rom path made it. Can I change this standard path somewhere?

btw sorry for spamming

I just left the room. It must have been like 20-30 minutes since I tried to launch pcsx2 and now there it is. The pcsx2 emulator on my screen. Things getting stranger and stranger..

Yesterday when I tried to get some dolphin games running I changed many settings but it seems nothing has changed. At some point I switched to a game that already ran almost fluent on my old NUCs. I turned on "Show FPS" and was curious how it would change if I increase the resolution. The result was nothing has changed. I had 25 FPS with native resolution and 25 FPS with 1080p. I was so confused. Then I switched back to the games that were so laggy before and suddenly they ran pretty good. And all I did was increasing the resolution. Suddenly I also had more FPS than before.

Im so confused what is happening there..