The numbers with the combinations are the marks and their position. The numbers you can change are the position on the display.
So let’s say the blinking : symbol for seconds, is on position 4 on my display, but can be on 5 or 6 at your’s depending on how many digits it has.
Once you get that one right, the rest is easy
A avr kan send your sound to tv as well when turned off 
passthrough is it called
Never mind, you already had the settings in your post
Lcdproc isn’t an option for him i guess?
Why don’t you use your AVR?
If you have your TV connected through ARC means it’s 2 way traffic.
Just looked at specs of your AVR and it had hdmi 2.0 support.
I run a LG 4K TV to a Denon AVR and on these inputs are my PS PRO, and my Kodi box.
When I switch to movies on kodi, my AVR goes to the mediaplayer input, the audio is set to whatever passthrough the movie has, and every setting is possible, and sends the 4K (HDR) signal to tv. Same with my PS Pro.
Just activate HDR on your tv on the hdmi port that runs to your AVR and when possible, set your AVR settings to HdMI advanced. This os only when you have HDR compatible stuff.
Your AVR is you hdmi hub/switch
Tested for couple of hours, runs like a charm The Coolest ! Display switches to apps when in an App setup, setup when in system setup.
Videoplayback is stable on FHD and 4K HDR
BTW thnx for the tip about the x92 logo, that thing kept burning even when box was off, so now there are holes 🤪
My fan is coolermaster and no noise...
So why not cool it hard😂
My box always ran at 82 degrees max on LE
Android was gone as soon as i plugged it in hahaha
also fixed another "test"
Temperature was constantly around 80 degrees, and in my opinion way to hot.
Found a big case fan laying around, dismantled the box, increased hole sizes in the bottom of the box, added some more holes, added holes in the side of the box and above the SD slot for air removal, and the fan underneath the box and made a connection through USB.
Box now runs at maximum 52 degrees, even when watching a movie.
It's also more responsive because the thing doesn't get so hot anymore.
Now just have to add something to make sure the box is high enough and air can get in.
My tip is add a fan! especially with the s912 CPU
Got it to work. Video playback on 4K HDR is perfect.
These are my settings for the x92 for working display
Index 0 is 4
Index 1 is 0
Index 2 is 1
Index 3 is 2
Index 4 is 3
New issue arising
When I run the service addon, it causes incredible framedrops in video. I’m talking about 4K HDR.
Shutting the service down solves the problem.
Edit!
It works!
Don’t ask me what i did but it works!
It runs on you q_200_2_x92
Good job!
this is the plain file on which the box is running now, the q_200_2g because that one is the only one on wich my box would load.
But like I said, if i look at the OE android firmware file, that one says q_201
Only you guys said that the device tree with q_201 is 100Mbit lan, and q_200 is with gigabit support.
Then the choice is easy for me, GB lan is more important than a display that doesn't work.
will this work? The Coolest
Wow dude, this is cool what you' re teaching me! 
i made a text file for you
http: //http://fileshare.link/c2d0046f06e1a004/dmesg_s912_x92.txt
Just remove the space
if i use dmesg it's a long list which i can't place because it's to big and over 30.000 characters
uhm i know how to ssh in yes, but help me with dmesg
