OK - so I managed to mount the partition and get what seems to be all the files off. Nothing would write to it or format it though, so the card has gone in the bin.
...
maybe a try with:
Posts by GDPR-7
-
-
ok damn. That was it probably. Somehow I have to use 192.168.0.28 instead of 192.168.188.32. Don’t know why but thank you very much !
you should read the service pages from AVM or your manuals regarding IP-Adresses of "Gast-(W)LAN".
Further I guess it's unnessary to setup "Portfreigaben".
ssh should do OOB.
on my 7590 I don't need to setup Portfreigaben to reach my LE via ssh.
- but it's some years ago that I was running a 7390 -
-
However, the HDMI is on a PCI-Express video card so no I don't have any option in BIOS to disable that.
A shot in the wild:
maybe there is module parameter for your graphic card driver (radeon ?) to shut HDMI audio off ?
in case of module radeon: "modinfo radeon" will show all available parameter
-
dmesg -w
tail -f ~/.kodi/temp/kodi.log
and simultaneously try to play the *.flac
Q.:
is LE able to decode flac at all ?
- I'm unsure -
-
maybe !
in the tar is a directory .kodi and there in a dir. temp and there in the kodi.log.
complete path: /storage/.kodi/temp/
in kodi.log you should find the LE Version (first lines)
-
Hello
I'm searching for NUC (or particularly: NUC_8i3) owners to exchange some experience.
I'm owning my i8-Nuc for ~3 month and see every ~60s recuring artefacts (?) mostly in the moving part of a picture watching Sat-TV.
I also saw crashes with LE 9.2., 9.2.x and nightly, but without an hint how to reproduce.
the crashes come and go, means: sometimes, over 6 h SAT-TV, I do not get a single one.
debug log/ bug report:
Kodi crashes watching Sat-TV · Issue #17531 · xbmc/xbmc · GitHub
When I start the nuc for the first time of an day the pictures are first completely correct, but after some time (~5 minutes) I get this artefacts.
Strange is that I'm able to watch streaming TV (german mediathek, movie-res. 864x480) or 2-4k movies I downloaded without this artefacts or crashes.
I have never seen this with my old NUC (D34010WYKH).
what I have tried so far:
- played with all video related setting
- setup a hand configured nuc (no backup restore)
- set the lowest GPU freq. to 1050 (it lowered the artefacts somewhat)
my qestions are:
1. where is my problem ?
2a. is it hardware or software ?
2b. did I bought a "monday-device" ?
2c. what HW component (HDMI cable, RAM, digibit, LAN) to look at ?
3. what is your HDMI firmware version ?
month ago Intel released a version 1.77, but pulled it ~2 weeks ago and re-released 1.77 again
4a. would I see an sat-tv-picture at all, if the digibit, tvheadend or the LAN is unable to deliver an complete/error-free stream/content (?)
I guess there is some error correction build in and working (to some extent).
4b. would I then see a picture and would it declare the artefacts ?
...
my Setup:
- Telestar DIGIBIT R1 (refurbished, but flawless working since ~2 years) with standard FW
- cable directly from the sat dish into the digibit (no switches, etc.)
- TvHeadend for germany-sat-tv on the (same) NUC
- LAN connection
- HDMI connection
- Monitor: Philips 247E3LHSU
- Audio goes via HDMI into the monitor and at the headphone out to an 2.1 speaker system
-
you might use "testparm -v" on an command line to see which setting from what smb.conf is at least in use.
e.g.
testparm -v | grep "domain master"
what I read years ago: Browser election is a long lasting and a ongoing process.
IIRC there were/are settings to force a Browser.
-
Working on it..
But how can I access the log files if it's not booting up??"SAFE MODE" indicates for me a successful boot - but I hadn't this case on LE, other distro only -
ssh into LE maybe
-
.... Don't be shy giving details...
and the output of
a) systemctl status xorg.service
and/or
b) cat /var/log/Xorg.0.log
can lower the "shyness" too
-
THX for response !
I'm currently in an testing/replicating mode:
as said LE is scratch installed/configured (no backup restore) and addon's with care only.
I'm just waiting for an crash.
service.kn.switchtimer is in the org. LE-AddOn-Repo. The switch for "unknown sources" in addon settings is still off thereby !
KN Switchtimer Service | Kodi | Open Source Home Theater Software
while I'm here:
where to place an RFC regarding "dual boot" for LE ?
-
-
since some time I get crasher in LE watching TV (SAT).
it starts some weeks ago in LE 9.2 and remains after upgrade to 9.2.1.
it happens also in a clean LE 9.2.1 install plus backup restore.
the crasher occurs with the following addon's installed:
- tvheadend
- system-tools
- network-tools
- service.kn.switchtimer
- WDR Rockpalast
- ZDF mediathek 2016
- mediathekview
hardware: see signature !
while I'm completely screwed understanding the crash log esp. regarding the questions:
a) is it kodi itsself / alone ? or
b) is it kodi in combination with my AddOn's ? or
c) something other
1. Question:
Is anybody here who could give me a pointer where to look at ?
Yesterday, I installed LE 9.2.1 from the scratch.
I did NO restore from my backup => complete new config. by hand
only the first 4 Addon's were installed
for the first run/use: NO crasher so far.
2. Question:
so it looks like one of my addional AddOn's runs wild, but which one ?
stack trace attached
-
take a look at:
soundcard regression (9.2 => 9.2.1) - LibreELEC Forum
(maybe) no need to downgrade !!!
-
Any ideas on what could be the problem?
don't know exactly, but in my TvHeadend HTSP Client (see: Setting => Add-ons => my add-ons => PVR client) the IP is set to 127.0.0.1, ports are default (9981 and 9982) and NO user and NO user passwd
-
dmesg | grep -i cec
and a "visual" grep through the whole dmesg shows nothing.
anyway, I attached a photo of the bios setting related to CEC
-
...
As far as I know, Intel/AMD/Nvidia don't have CEC support in any motherboard or graphics card. ...
Sure ?
Intel® NUC Kit NUC8i3BEH 126150
search for CEC.
...These old but good for Kodi models can't handle CEC over HDMI properly!
Are the newer models better in this?
I don't know, cause I got no use case for CEC, but it's buildin, see above.
-
what makes you so confident ?
if I follow the download links I see:
so it seems 9.1.501 is the last one - at least on that mirror - !
maybe it was late mirrored after some internal testing or waiting on an late fix since 2019-09-03, I guess ...
btw. after an short test on my NUC: it runs well - so far - Thanks guys !!!
-
