Posts by t3uch1
-
-
So I reinstall windows on an old computer and here is the test result
Version 8.2.3 :
RPI ( SD ) -> Odroid ( SD ) = OK
RPI ( SD ) -> Odroid ( DD ) = OK
Odroid ( DD ) -> RPI ( SD ) = OKMAC <-> RPI ( SD ) = OK
MAC< -> Odroid ( SD ) = ERRORMAC <-> Odroid ( DD ) = ERROR
Windows 7 -> Odroid ( SD ) = OK
Windows 7 -> Odroid ( DD ) = ERROR
Version 8.0
MAC <-> ODROID ( SD ) = OK
MAC <-> ODROID ( DD ) = OK
I do not understand why Mac has RPI it works and no Mac has Odroid, it's completely crazy, And why of windows it works of that on the SD and not on the DD I do not understand anything anymore I would almost have been reassured that it was the Odroid defectuous at least I could have solved the problem I am lost again
-
copy finished successfully
-
The copy is not finished yet 9go on 10go for the moment Since Odroid in file management, I do not see the RPI in SMB, so I can not test
-
RPI 2, Ethernet, Libreelec 8.2.3 as a server
Mac in wifi on the network as a client,
I copy a file of 10GO and it is a 8go without er er message to 2.06gb
-
For the manipulation you asked me I did not understand ... As for the network as it works with the RPI on the same network it is not that ... A friend has an Odroid c2 he will test with a version 8.2 if sharing works
-
On the RPI with Libreelec 8.2.3 it works ... So either it's the special distribution for Odroid (I doubt it) or it's the Odroid ... what do you think?
-
Thank you in any case for trying to help me
You think it can come from my network? because under Windows 7, 10, and mac similar ...
If it is the case I test an installation on an old RPI 3 to see if it's joking also we will know that it is not the Odroid server, or the Odroid version ...
I use Orange as an internet network, in France we have a lot of this network and we do not have the same problem ...
-
Yes I did well in Parameter, Libreelec, Service, Which one should work SMB 1? 2? I can repeat a test, No way back under an old samba on 8.2? Is it possible that the new samba is not compatible with my network card?
-
after several test samba works on all versions 8.0 but not on versions 8.2 of librelec does it differ Samba from these two versions?
-
Hi
Helloi have to test today this distribution and smb works
what is the difference between this version and the official so that Smb worksODROID • View topic - LibreELEC 8.0 - Krypton final - media build edition - 32bit
-
I find it a bit easy to give up, it works with many people to perfection, I do not see why at home, I would prefer to find a solution to this problem because the solution must exist, if I had the budget for a SIN etc I would not opt for the C2
I think it will be hard but I do not despair I would find I hope this solution ahahworst of the worst by FTP it works perfectly
-
it works in ftp but I had to buy odroid for this kind of everyday use and ftp is long so that it works at everyone I would like to find the solution and if it is odroid that has a default to exchange it as it is new
-
Hellosorry for the delay
i tested with windows 7 network error
windows 10 and another computer: unexpected network error
in wifi and ethernet the same ...
I do not have another internet box to try but people with the same have no worries
if i want to copy a file from odroid to a computer it does not work
I do not know what to do -
Hello,
Sorry for my English I'm French
I use LibreElec (Raybuntu) rb-leia22 9.0 on my Odroid C2, thank you very much because thanks to that I was able to install PyLoad which does not work on the basic distribution,
On the other hand I have a problem with the basic version, the boot was done in 30sec and now 3 to 4 minutes, is this normal?
-
I just received my hardware, and from the beginning it does, I try to redo my SD libreelec always the same ... I'm trying tonight with a SMB client on mac, Actually windows do not say that the file is too big but it puts a network error,
-
So I really do not understand why neither since mac nor since windows I manage to copy a file of 10go, network card of odroid HD ?
-
Hello
I have the latest version of High Sierra,
What I do not understand is that under Windows I can not nomplu to send big file, yesterday I test 2.5 and 9go the 2.5 passes but not the 9go,
yet it should pass, windows starts the copy at 0% it look for "elements" then network error message,
for the client SMB I did not try I look tonight if I find a SMB client for mac
I can not see via SSH the configuration of the sharing system of my Odroid if by chance there is no limit of right or file size to delete or configure? :
Code# smbmount //nas1.domain.com/sharename /datanas -o username=LOGINNAME,password=LOGINPASSWORD,lfs
This line of code visibly activates the support of Large File Support and solves the problem for some, like doing this under libreelec to test?