Posts by Bouriquet59

Hello,

I'm sorry for my English, I'm French.

I allow myself to come to you following some problems that I encounter when playing a TV channel.

I said that until a few "months" / "weeks ago" I had absolutely no concern about reading the TV.

For information.

My HTPC runs with

Motherboard: Gigabyte H55M-UD2H

CPU: Intel Core i3 530

Ram: 2x2GB DDR3 1333MHz

I have the part with TVHeadEnd on a raspberry PI3 which is totally dedicated.

The Kodi part is realized with LibreElec

The installation is wired.

In 95% of cases the reception of the TV is going very well.

On the other hand from time to time I find myself in the evening (for example when I look at SWAT on TF1) with a lag on the image that can be more and more pronounced until I stop my HTPC.

Do you have any idea what it can be?

On my side I have 3 hypotheses:

1 - TVHE jokes for a reason X and can not send me the flow -> Hypothesis HS because I put my laptop wifi on the same stream at the same time and I do not meet the phenomenon

2 - Problem on my switch that would not manage to send me the flow -> I have a doubt

3 - My 3rd hypothesis seems to me more correct. Would the TNT feed have not changed?

Indeed I have the impression that my Intel Core i3 530 processor, which is now 9 years old, can not decode "cleanly" the flow or start to pick it up.

What do you think ?

If it is this 3rd hypothesis, what do you advise me?

- Just add a graphic card a Geforce GT1030 for example

- Or completely change the motherboard, processor and ram, in order to go on an Intel UHD Graphics 630 chipset

If you have other ideas I'm interested.

Thank you in advance for your return.

Michael

Thank you very much for your reply.

I like to keep my equipment up to date so that's why when I make updates, which is not always good it's true.

Moreover, MQ7 is no longer available and MQ8 only works with Kodi 18.

I'll try your tip and you'll know about it next weekend.

Hello,

Thank you for your answer.

I use the motherboard Gigabyte H55M-UD2H and the processor Intel Core i3 530

What is annoying is that I had absolutely no problem before and that it's been years that I run with openelec and libreelec without worries. Until now....

Hello,

(sorry for my English, I'm French)

I have a HTPC with LE 9.0.1 which is connected to an Onkyo TX-NR676 amp in HDMI, and then to a TV.

All equipment is controlled by a remote control logitech harmony.

When I turn off the equipment, I ask to put the HTPC in standby.

When waking I have no sound.

I have to restart my HTPC to get the sound again.

I did not have the problem under LE 8 at all.

Do you have an idea ?

Thanks in advance.

Michael

Do you have some news ?

I have the same problem and I don't have a intel nuc

No no it is a 3Go because yes on the package it is written 3Go but also under android he sees good 3Go.

This is the file that no longer works. There seems to have been an update of the latest GT1 ultimate

yes everything works with 2g.dtb but LE works with 2G. Why the 3g does not work anymore?

Hello,

Sorry for my English, but I'm French.

I think the problem has been known for a long time but I have not found the solution.

I just put LibreELEC on my GT1 Ultimate 3Go Ram 32GB

Index of /s912/8.2/8.2.2.2

and I wanted to use

Index of /s912/8.2/device_trees/1Gbit_Ethernet

the file gxm_q200_3g.dtb but in this case the box does not start.

I used the file gxm_q200_2g.dtb

The box starts but I have not 3Go Ram but 2GB.

Would someone have the sollution?

thank you in advance for your return