Posts by chrisk2305

anyone? thanks in advance

push

Klojum Sure, here you go: hastebin

Thanks,

Chris

Hi Guys,

I am using a Asrock J4105 ITX Mainboard as basis for my HTPC PC with the current Leia Millhouse Build (8th august 2018). I have had this issue ever since and tried at least 30 different builds. While 1080p movies play just fine I get annoying stuttering with every 2160p Movie I throw at it. I messes around with adjusting refresh rate to the movie and so on but nothing helped. This thing should easily play 2160p mkv's without stuttering. CPU usage is below 20%. Do you have any suggestions I could try?`

Thanks in advance!

Regards,

Chris

mglae : Thanks a lot!

mglae : Thanks! So you mean to put all Libreelec files (system and kernel) and also the syslinux.efi file on a webserver? What about DHCP options? Thanks again.

Hi Guys,

I just received my new HTPC Platorm (Asrock J4105-ITX) and had to notice that this board has no legacy boot options. For the last couple of years I have been booting LE via PXE and now I can't. Do you have any clue how to make that work? Do I have to put an .efi file in my boot directory on the server? Please let me know if you have any questions.

Thanks,

Chris

Edit: I managed to boot via PXE in UEFI mode by pointing to the correct syslinux.efi file in dhcp options. But PXE Boot via UEFI is slow as hell. Found many people complaining about bad performance in UEFI mode but did not find a solution yet.

up. Anybody? Thx!

up

push

I created a imon.conf in modprobe.d directory, but that didn't work. Please advise. thx

Hi TheUlpio, thanks for the reply!

So you think the module option is doing the trick. How did you apply this option? thanks!

Anybody? Do you need more information? I also change the protocol to "0" which should be the right one for my type of vfd: 15c2:ffdc

Thanks for the guide, but I was not able to get my iMON VFD LCD running. I chose the imon-lcd driver in the LCDproc addon and can't get the display to show anything. Any hints? Thanks!

Hi Guys,

Hope you can assist me in getting my old iMon VFD to work. I am using LE 8.1.2 atm und the Display is picked up:

LibreELEC:~ # dmesg | grep imon
[   18.122342] imon 2-1.5:1.0: Unknown 0xffdc device, defaulting to VFD and iMON IR
[   18.162307] Registered IR keymap rc-imon-pad
[   18.209055] imon 2-1.5:1.0: iMON device (15c2:ffdc, intf0) on usb<2:3> initialized
[   18.209079] usbcore: registered new interface driver imon

I installed LCDProc and XBMC LCDProc and tried the driver "imon" as wall as "imon-lcd" but none of them work. I also get a lot quite of lot of errors. E.g.:

[   21.962252] Call Trace:
[   21.962257]  ? dump_stack+0x5c/0x78
[   21.962259]  ? __warn+0xb4/0xd0
[   21.962261]  ? warn_slowpath_fmt+0x46/0x50
[   21.962264]  ? usb_submit_urb+0x2f1/0x520
[   21.962267]  ? send_packet+0xc8/0x2e0 [imon]
[   21.962269]  ? vfd_write+0xc8/0x2a0 [imon]
[   21.962271]  ? __fd_install+0x17/0xa0
[   21.962273]  ? __vfs_write+0x1e/0x120
[   21.962275]  ? SYSC_accept4+0x126/0x1b0
[   21.962276]  ? vfs_write+0xa7/0x160
[   21.962278]  ? SyS_write+0x3d/0x90
[   21.962281]  ? entry_SYSCALL_64_fastpath+0x1a/0xa9
[   21.962282] ---[ end trace f5f9888d6ddefb55 ]---
[   21.962284] imon:send_packet: error submitting urb(-16)
[   21.972206] imon:vfd_write: send packet #0 failed
[  245.208341] INFO: task LCDd:823 blocked for more than 120 seconds.

Any idea what I am doing wrong? Thanks in advance!

Chris