Posts by fritz_hh

fritz_hh

Hey all,

I wrote a shell script to download some files for EPG information. A file must be downloaded from a google drive

Therefore I tried out the following possibilities:

curl -L -o guide.xml "https://docs.google.com/uc?export=download&id=[FILE_ID]"

wget --no-check-certificate 'https://docs.google.com/uc?export=download&id=[FILE_ID]' -O guide.xml

If the script is executed manually in the terminal, both options works fine.

However, if the script is executed via crontab, all sources will be downloaded, just not the file from googeldirve!?

Anybody got an idea to fix it?

Okay, i have it....

the local path must be specified

fritz_hh · Password reset/recovery? fritz_hh June 19, 2018 at 9:21 PM

Hello everybody,

i have a problem with a LibreElec System on a Rpi 3.

By a mistake the SSH Port was open and any people has set a new password for the root user

Give it a solution to recover or reset the password on the SD Card?

fritz_hh · WebGrab+Plus fritz_hh March 9, 2018 at 12:52 PM

Nearly it's the milhouse Update with Kodi 18 prev.

I have edit the value in /storage/.kodi/addons/service.webgrabplus/settings.xml as well, but it's have after a reboot the same effect.

Now i have set the value for on-aktiv to 86400 (24 hours) that's works fine.

The next try 604800

fritz_hh · WebGrab+Plus fritz_hh March 8, 2018 at 11:43 PM

Download Loop with the Addon Timer...

in some posts i have read that when i will stop the "on-aktive" download function so i have to clear the field.

But LibreElec doesn't acept a blank filed, when i give the value 0 the download will start every boot.

So i have edit the value in the file: .kodi/userdata/addon_data/service.webgrabplus/settings.xml

In this case the addon takes the value automatic to 300 *wtf*

How can i deactivate the function "on-aktive" for all cases?

Than my WebGrab Config has to upgrade 93 chanels for the next 6 days the runtime is 2 hours and is enought when

this job runs every 24 hours.

fritz_hh · Raspberry 3 with USB Wifi Stick fritz_hh December 9, 2017 at 3:05 PM

Thank You chewitt,

that's works fine

On LibreElec 8.x, OSMC 2017-10-1, openElex 6.x

Here are the soloution compared for all that have se same problem with a externl Wifi device that have no MAC adress.

For Rpi 3 diable the Internal Wifi Module is it necessary to edit the config.txt file:

Code

mount -o remount,rw /flash
nano /flash/config.txt

Add at the End: dtoverlay=pi3-disable-wifi

Code: config.txt

...
dtoverlay=pi3-disable-wifi

and Save after a reboot the internal Wifi Module is diabled.

For the external Wifi Module based on "rtl8812au" Chipset without a MAC Adress:

1. Give the System the local info for the Wifi add the File "cfg80211.conf" in the directory "modprobe.d"

LibreElec/openELEC: /storage/.config/modprobe.d/

OSMC: /etc/modprobe.d/

Code: cfg80211.conf

options cfg80211 ieee80211_regdom=DE

2. Set a fix MAC Adress for the device

Code: 8812au.conf

 options 8812au rtw_initmac=xx:xx:xx:xx:xx:xx rtw_ht_enable=1 rtw_cbw40_enable=3

Now reboot and enjoy

fritz_hh · Raspberry 3 with USB Wifi Stick fritz_hh December 3, 2017 at 9:09 PM

Thank you chewitt,

now i have write a driver option file in /etc/modprobe.d/8812au.conf

Code

options 8812au rtw_initmac="6b:XX:XX:XX:XX"

but now i can't find the wifi chanels 12/13 on 2,4 ghz and no 5 ghz Networks

When i remove yet the conf file and reboot the usb wifi will also not find networks on chancel 12/13 on 2,4 ghz band and 5ghz anymore.

fritz_hh · Raspberry 3 with USB Wifi Stick fritz_hh December 3, 2017 at 1:50 PM

So and here we have the dmesg URL from as test with Rpi2 on LibreELEC 8.2.1

URUW

Display Spoiler

Code

[    2.793050] usb 1-1.3.3: New USB device found, idVendor=0bda, idProduct=a811
[    2.793066] usb 1-1.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.793074] usb 1-1.3.3: Product: 802.11ac WLAN Adapter 
[    2.793080] usb 1-1.3.3: Manufacturer: Realtek 
[    2.793088] usb 1-1.3.3: SerialNumber: 00e04c000001

[    6.541599] RTL871X: module init start
[    6.541621] RTL871X: rtl8812au v4.3.20_16317.20160108
[    6.541626] RTL871X: build time: Nov 16 2017 08:39:20
[    6.917295] RTL871X: ERROR invalid mac addr:00:00:00:00:00:00, assign random MAC
[    6.918325] RTL871X: rtw_ndev_init(wlan0) if1 mac_addr=00:e0:4c:89:90:67
[    6.923172] usbcore: registered new interface driver rtl8812au
[    6.923189] RTL871X: module init ret=0

Display More

fritz_hh · Raspberry 3 with USB Wifi Stick fritz_hh December 2, 2017 at 12:09 PM

That's interesting too but i can see all Networks in the neighborhood 2,4 an 5 ghz.

But in case the system can not rigster the real MAC Adress from the Chip that is realy strange that wil work with your solution....

Crazy

But maybe there are a other or newer driver / frimware for the Chipset that i can install or modify?

fritz_hh · Raspberry 3 with USB Wifi Stick fritz_hh December 2, 2017 at 11:32 AM

Hey chewitt,

here i have a print out of dmeseg it's from my test with OSMC but is have the same problem.

I think it is the driver for the rtl8812au chipset he can not read the MAC from the EPROM...

Display Spoiler

[ 1.244780] dwc_otg: Microframe scheduler enabled

[ 1.244826] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x806d587c

[ 1.244837] WARN::hcd_init_fiq:460: FIQ ASM at 0x806d5bec length 36

[ 1.244848] WARN::hcd_init_fiq:486: MPHI regs_base at 0xb087a000

[ 1.244908] dwc_otg 3f980000.usb: DWC OTG Controller

[ 1.244944] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1

[ 1.244976] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000

[ 1.245022] Init: Port Power? op_state=1

[ 1.245027] Init: Power Port (0)

[ 1.245227] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

[ 1.245237] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 1.245246] usb usb1: Product: DWC OTG Controller

[ 1.245254] usb usb1: Manufacturer: Linux 4.9.29-10-osmc dwc_otg_hcd

[ 1.245262] usb usb1: SerialNumber: 3f980000.usb

[ 1.246054] hub 1-0:1.0: USB hub found

[ 1.246095] hub 1-0:1.0: 1 port detected

[ 1.246734] dwc_otg: FIQ enabled

[ 1.246740] dwc_otg: NAK holdoff enabled

[ 1.246744] dwc_otg: FIQ split-transaction FSM enabled

[ 1.246757] Module dwc_common_port init

[ 1.246996] usbcore: registered new interface driver usb-storage

[ 1.247228] mousedev: PS/2 mouse device common for all mice

[ 1.247552] usbcore: registered new interface driver usbtouchscreen

[ 1.248008] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer

[ 1.248291] bcm2835-cpufreq: min=600000 max=1000000

[ 1.250407] sdhci: Secure Digital Host Controller Interface driver

[ 1.250410] sdhci: Copyright(c) Pierre Ossman

[ 1.250570] sdhost-bcm2835 3f202000.sdhost: could not get clk, deferring probe

[ 1.252589] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe

[ 1.252647] sdhci-pltfm: SDHCI platform and OF driver helper

[ 1.254712] ledtrig-cpu: registered to indicate activity on CPUs

[ 1.254819] hidraw: raw HID events driver (C) Jiri Kosina

[ 1.254911] usbcore: registered new interface driver usbhid

[ 1.254913] usbhid: USB HID core driver

[ 1.255393] vchiq: vchiq_init_state: slot_zero = 0xaf980000, is_master = 0

[ 1.257073] Initializing XFRM netlink socket

[ 1.257088] NET: Registered protocol family 17

[ 1.257166] Key type dns_resolver registered

[ 1.257239] Registering SWP/SWPB emulation handler

[ 1.257651] registered taskstats version 1

[ 1.258417] Key type encrypted registered

[ 1.258601] vc-sm: Videocore shared memory driver

[ 1.258606] [vc_sm_connected_init]: start

[ 1.263220] [vc_sm_connected_init]: end - returning 0

[ 1.267093] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2

[ 1.268009] sdhost: log_buf @ af907000 (ef907000)

[ 1.344519] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)

[ 1.346545] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0

[ 1.346551] mmc-bcm2835 3f300000.mmc: DMA channel allocated

[ 1.424581] of_cfs_init

[ 1.424648] of_cfs_init: OK

[ 1.430657] Freeing unused kernel memory: 2048K (80c00000 - 80e00000)

[ 1.443687] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)

[ 1.445236] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)

[ 1.446764] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)

[ 1.449566] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)

[ 1.474617] Indeed it is in host mode hprt0 = 00021501

[ 1.484512] mmc0: host does not support reading read-only switch, assuming write-enable

[ 1.490334] mmc0: new high speed SDHC card at address aaaa

[ 1.490873] mmcblk0: mmc0:aaaa SC16G 14.8 GiB

[ 1.509443] random: fast init done

[ 1.542019] mmcblk0: p1 p2

[ 1.549369] mmc1: new high speed SDIO card at address 0001

[ 1.637845] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)

[ 1.644692] fsck: E2fsck run: /bin/e2fsck -p -C 0 /dev/mmcblk0p2

[ 1.644852] fsck: Filesystem UUID: baf6c3be-07cc-43d9-a20c-2d3184e511dc

[ 1.645029] fsck: /dev/mmcblk0p2: clean, 25116/958464 files, 266355/3826688 blocks

[ 1.674581] usb 1-1: new high-speed USB device number 2 using dwc_otg

[ 1.674674] Indeed it is in host mode hprt0 = 00001101

[ 1.904737] usb 1-1: New USB device found, idVendor=0424, idProduct=9514

[ 1.904743] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[ 1.905275] hub 1-1:1.0: USB hub found

[ 1.905337] hub 1-1:1.0: 5 ports detected

[ 2.224575] usb 1-1.1: new high-speed USB device number 3 using dwc_otg

[ 2.354752] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00

[ 2.354762] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[ 2.357325] smsc95xx v1.0.5

[ 2.446921] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:ba:99:31

[ 2.544542] usb 1-1.4: new high-speed USB device number 4 using dwc_otg

[ 2.675080] usb 1-1.4: New USB device found, idVendor=0bda, idProduct=a811

[ 2.675090] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3

[ 2.675096] usb 1-1.4: Product: 802.11ac WLAN Adapter

[ 2.675101] usb 1-1.4: Manufacturer: Realtek

[ 2.675105] usb 1-1.4: SerialNumber: 00e04c000001

[ 2.774592] usb 1-1.5: new full-speed USB device number 5 using dwc_otg

[ 2.917692] usb 1-1.5: New USB device found, idVendor=17ef, idProduct=6022

[ 2.917702] usb 1-1.5: New USB device strings: Mfr=0, Product=2, SerialNumber=0

[ 2.917707] usb 1-1.5: Product: Lenovo Ultraslim Plus Wireless Keyboard & Mouse

[ 2.924353] input: Lenovo Ultraslim Plus Wireless Keyboard & Mouse as /devices/platform/soc/http://3f980000.usb/usb1/1-1/1-1.5…01/input/input0

[ 2.984727] hid-generic 0003:17EF:6022.0001: input,hidraw0: USB HID v1.11 Keyboard [Lenovo Ultraslim Plus Wireless Keyboard & Mouse] on usb-3f980000.usb-1.5/input0

[ 2.994108] input: Lenovo Ultraslim Plus Wireless Keyboard & Mouse as /devices/platform/soc/http://3f980000.usb/usb1/1-1/1-1.5…02/input/input1

[ 3.029904] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)

[ 3.030109] systemd[1]: Detected architecture 'arm'.

[ 3.054829] hid-generic 0003:17EF:6022.0002: input,hidraw1: USB HID v1.11 Mouse [Lenovo Ultraslim Plus Wireless Keyboard & Mouse] on usb-3f980000.usb-1.5/input1

[ 3.077030] NET: Registered protocol family 10

[ 3.078007] systemd[1]: Inserted module 'ipv6'

[ 3.088788] systemd[1]: Set hostname to <osmc01>.

[ 3.307104] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.

[ 3.307279] systemd[1]: Found ordering cycle on basic.target/start

[ 3.307289] systemd[1]: Found dependency on sysinit.target/start

[ 3.307298] systemd[1]: Found dependency on rpcbind.service/start

[ 3.307308] systemd[1]: Found dependency on network-online.target/start

[ 3.307317] systemd[1]: Found dependency on connman-wait-for-network.service/start

[ 3.506269] fuse init (API version 7.26)

[ 3.743550] systemd-udevd[220]: starting version 215

[ 4.155025] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000

[ 4.491965] 8812au: loading out-of-tree module taints kernel.

[ 4.503500] RTL871X: module init start

[ 4.503509] RTL871X: rtl8812au v4.3.20_16317.20160108

[ 4.503512] RTL871X: build time: Oct 9 2017 03:30:04

[ 4.573311] usbcore: registered new interface driver brcmfmac

[ 4.584266] RTL871X: ERROR invalid mac addr:00:00:00:00:00:00, assign random MAC

[ 4.585108] RTL871X: rtw_ndev_init(wlan0) if1 mac_addr=00:e0:4c:2b:f0:a4

[ 4.586162] usbcore: registered new interface driver rtl8812au

[ 4.586172] RTL871X: module init ret=0

[ 4.664029] random: crng init done

[ 4.735183] brcmfmac: Firmware version = wl0: Aug 7 2017 00:46:29 version 7.45.41.46 (r666254 CY) FWID 01-f8a78378

[ 5.205616] systemd-journald[196]: Received request to flush runtime journal from PID 1

[ 5.229118] uart-pl011 3f201000.serial: no DMA platform data

[ 5.411095] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup

[ 5.411233] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

[ 5.461623] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready

[ 5.461633] brcmfmac: power management disabled

[ 5.741274] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready

[ 7.677790] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

[ 7.682237] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1

[ 7.695436] 8021q: 802.1Q VLAN Support v1.8

[ 9.640442] Bluetooth: Core ver 2.22

[ 9.640503] NET: Registered protocol family 31

[ 9.640507] Bluetooth: HCI device and connection manager initialized

[ 9.640521] Bluetooth: HCI socket layer initialized

[ 9.640529] Bluetooth: L2CAP socket layer initialized

[ 9.640551] Bluetooth: SCO socket layer initialized

[ 9.649524] Bluetooth: HCI UART driver ver 2.3

[ 9.649534] Bluetooth: HCI UART protocol H4 registered

[ 9.649537] Bluetooth: HCI UART protocol Three-wire (H5) registered

[ 9.649646] Bluetooth: HCI UART protocol Broadcom registered

[ 9.722101] Bluetooth: BNEP (Ethernet Emulation) ver 1.3

[ 9.722109] Bluetooth: BNEP filters: protocol multicast

[ 9.722122] Bluetooth: BNEP socket layer initialized

[ 17.318480] Console: switching to colour dummy device 80x30

[ 25.226512] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.

[ 152.675723] RTL871X: rtw_set_802_11_connect(wlan0) fw_state=0x00000008

[ 152.730076] RTL871X: start auth

[ 152.734473] RTL871X: auth success, start assoc

[ 152.750325] RTL871X: rtw_cfg80211_indicate_connect(wlan0) BSS not found !!

[ 152.750352] RTL871X: assoc success

[ 152.750557] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

[ 152.755054] RTL871X: recv eapol packet

[ 152.755774] RTL871X: send eapol packet

[ 152.767522] RTL871X: recv eapol packet

[ 152.767931] RTL871X: send eapol packet

[ 152.768548] RTL871X: set pairwise key camid:4, addr:c0:25:06:f1:ce:56, kid:0, type:AES

[ 152.775466] RTL871X: set group key camid:5, addr:c0:25:06:f1:ce:56, kid:2, type:AES

[ 459.226955] RTL871X: recv eapol packet

[ 459.228339] RTL871X: set group key camid:6, addr:c0:25:06:f1:ce:56, kid:1, type:AES

[ 459.228420] RTL871X: send eapol packet

[ 1059.233177] RTL871X: recv eapol packet

[ 1059.234595] RTL871X: set group key camid:5, addr:c0:25:06:f1:ce:56, kid:2, type:AES

[ 1059.234745] RTL871X: send eapol packet

[ 1659.238368] RTL871X: recv eapol packet

[ 1659.239914] RTL871X: set group key camid:6, addr:c0:25:06:f1:ce:56, kid:1, type:AES

[ 1659.240004] RTL871X: send eapol packet

fritz_hh · Raspberry 3 with USB Wifi Stick fritz_hh November 30, 2017 at 2:14 PM

Hello everybody,

i have a little problem with my LibreELEC / Tvheadend client.

The onboard wifi modul on the Rpi 3 is not fast enught to see HD TV.

So if ordered this WIFI USB Stick: ANEWKODI Wlan Stick 600Mbit/s, 5dBi Antenna, Dualband: Amazon.de: Elektronik

In the Rpi3 'confi.txt' i have diabled the onboard modul with entry:

dtoverlay=pi3-disable-wifi

When i plug the USB Stick on the Rpi 3, LibreELEC identify the Stick in lsusb as

Bus 001 Device 004: ID 0bda:a811 Realtek Semiconductor Corp.

When i connect the Wifi Network on the Kodi Frotend, LibreELEC give the folowing Error Message:

Network Error: Did not receive a reply. Possible causes include: the remote App

The Stick connect the Network with really good performance but i can't find any entrys at the logs.

When i connect on the ssh console with connman he give no Error Message and connect.

But the problem is when i give the Rpi a reboot from the kodi frontend or with ssh,

in both things LibreELEC lost/forgett the Wifi Settings and the Key.

So i must re-enter the Settings an the key at each reboot