Posts by Pelican

Pelican · [8.2.3.1] LibreELEC 8.2 for S905/S905X Pelican September 16, 2017 at 3:23 PM

Yesterday I tried to watch a BD movie with a DTS HD HRA audio track, but I cannot get audio with the latest LE versions (8.1.7, 8.1.8) .

No luck with LE 7 either. My AVR says nothing and no sound, Other DTS and DD tracks are working.

Could you check this file (I cut about the first 200 MB) here: DTSHD_HRA.m2ts ?

Is it a bug or just a corrupted file?

dmesg after I try to play it:

Code

[  265.043700@0] remote: press ircode = 0x09,
[  265.043730@0] remote: scancode = 0x0080,maptable = 0,code:0xf6097f80
[  265.043745@0]
[  265.112497@0] codec:DisableVideoLayer()
[  265.128425@0] DI: di_receiver_event_fun , is_bypass() 1 trick_mode 0 bypass_all 0
[  265.128444@0] di_receiver_event_fun: vf_notify_receiver unreg
[  265.128477@2] DI: di_unreg_process unreg start 1.
[  265.128502@2] codec:DisableVideoLayer()
[  265.128512@2] codec:disbled keep video before free keep buffer.
[  265.128521@2] codec:disbled video for next before free keep buffer!
[  265.128531@2] codec:DisableVideoLayer()
[  265.128542@2] codec:free_alloced_keep_buffer           (null).          (null).          (null)
[  265.128554@2] codec:free_alloced_keep_buffer           (null).          (null).          (null)
[  265.128565@2] [tsync_avevent]event:2, param 0
[  265.128577@2] codec:video first pts = 0
[  265.128600@2] DI: di_unreg_process vf unreg cost 0 ms.
[  265.128610@2] DI: di_unreg_process unreg stop 0.
[  265.141741@3] codec:vdec1 video changed to 0 x 0 0 fps clk->200MHZ
[  265.142291@3] codec:video_disable_store(1)
[  265.142313@3] codec:DisableVideoLayer()
[  265.142326@3] codec:free_alloced_keep_buffer           (null).          (null).          (null)
[  265.142409@3] vfm_map_store:rm default
[  265.142476@3] vfm_map_store:add default  decoder ppmgr deinterlace amvideo
[  265.143499@0] codec:VsyncDisableVideoLayer
[  265.143524@0] codec:AFBC off now.
[  265.158097@0] remote: release ircode = 0x09,
[  265.158119@0] remote: scancode = 0x0080, maptable = 0,code:0x00000000
[  265.158134@0]
[  265.269815@0] aml_spdif_dai: aiu 958 playback disable
[  265.269905@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=192000, runtime->channels=8, same source mode(0)
[  265.269935@0] aml_spdif_dai: set 4x audio clk for 958
[  265.269945@0] aml_audio_hw: IEC958 16bit
[  265.269952@0] hdmitx: audio: aout notify rate 192000
[  265.269956@0] hdmitx: audio: aout notify size 16
[  265.269960@0] hdmitx: audio: no update
[  265.270385@0] audio_dsp: buf=0
[  265.270394@0] audio_dsp: IEC958_mode_raw=0
[  265.270423@0] audio_dsp: IEC958_mode_codec= 0, IEC958 type 2 CH PCM
[  265.270428@0] audio_dsp: last mode 8,now 0
[  265.276683@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
[  265.276729@0] aml_spdif_dai: share the same clock
[  265.276739@0] aml_audio_hw: IEC958 PCM32
[  265.276746@0] hdmitx: audio: aout notify rate 44100
[  265.276750@0] hdmitx: audio: aout notify size 32
[  265.276755@0] hdmitx: audio: aout notify format CT_PCM
[  265.276760@0] hdmtix: set audio
[  265.276774@0] hdmitx tx_aud_src = 0
[  265.276802@0] hdmitx: fs = 2, cd = 4, tmds_clk = 296703
[  265.276806@0] hdmitx aud_n_para = 4459
[  265.276826@0] hdmitx set channel status
[  265.276892@0] hdmitx: audio: Audio Type: PCM
[  265.276896@0] hdmitx: audio: set audio param
[  265.276906@0] aml_snd_m8_card aml_m8_snd.47: i2s/958 same source
[  265.277072@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
[  265.277078@0] aml_spdif_dai: share the same clock
[  265.277086@0] aml_audio_hw: IEC958 PCM32
[  265.277091@0] hdmitx: audio: aout notify rate 44100
[  265.277094@0] hdmitx: audio: aout notify size 32
[  265.277098@0] hdmitx: audio: no update
[  265.277104@0] aml_snd_m8_card aml_m8_snd.47: i2s/958 same source
[  265.277229@0] channel count should be 8, we got 2 aborting
[  265.281126@1] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
[  265.281139@1] aml_spdif_dai: share the same clock
[  265.281150@1] aml_audio_hw: IEC958 PCM32
[  265.281157@1] hdmitx: audio: aout notify rate 44100
[  265.281162@1] hdmitx: audio: aout notify size 32
[  265.281166@1] hdmitx: audio: no update
[  265.281176@1] aml_snd_m8_card aml_m8_snd.47: i2s/958 same source
[  265.282105@1] hdmitx: set frac_rate_policy as 0
[  265.282135@1] vout_serve: vmode set to 2160p60hz420
[  265.282159@1] vout_serve: disable HDMI PHY as soon as possible
[  265.282167@1] fb: current vmode=2160p24hz, cmd: 0x50000
[  265.282176@1] tv_vout: tv_set_current_vmode[919]fps_target_mode=33
[  265.282185@1] tv_vout: mode is 33,sync_duration_den=1,sync_duration_num=60
[  265.282199@1] tv_vout: 3tvinfo 33 not find
[  265.282203@1] tv_vout: new mode =2160p60hz420 set ok
[  265.282207@1] vout_serve: vinfo mode is: 2160p60hz420
[  265.282211@1] vout_serve: new mode 2160p60hz420 set ok
[  265.282230@1] hdmitx: video: get current mode: 2160p60hz420
[  265.282234@1] hdmitx: update rx hdr info 0
[  265.282238@1] hdmitx: update physcial size: 1280 720
[  265.282283@1] hdmitx: system: already init VIC = 0  Now VIC = 353
[  265.282289@1] hdmitx: rx no SCDC present indicator
[  265.284301@1] hdmitx: ddc rd8b error 0x54 0x01
[  265.286315@1] hdmitx: ddc rd8b error 0x54 0x01
[  265.286322@1] hdmirx version is 1.4 or below
[  265.286327@1] hdmitx div40: 0
[  265.308092@1] hdmitx: system: set mode VIC 353 (cd0,cs0,pm1,vd0,1)
[  265.308102@1] hdmitx: system: set pll
[  265.308106@1] hdmitx: system: param->VIC:353
[  265.308111@1] hdmitx: set clk: VIC = 353  cd = 4  frac_rate = 0
[  265.308123@1] config HPLL = 5940000
[  265.308147@1] HPLL: 0xc000027b
[  265.308150@1] config HPLL done
[  265.308160@1] set_hpll_od3_clk_div[437] div = 6
[  265.308169@1] j = 8  vid_clk_div = 1
[  265.308180@1] hdmitx: set enc for VIC: 353
[  265.308199@1] hdmitx_set_hw[4941] set VIC = 353
[  265.308389@0] hdmitx: system: irq 80000001
[  265.308408@0] Start = 0x10000100   End = 0x100001ff
[  265.308420@0] [0x10000104]: 0x00000001
[  265.308656@0] [0x10000180]: 0x000000ff
[  265.308661@0] [0x10000181]: 0x000000ff
[  265.308667@0] [0x10000182]: 0x00000003
[  265.308672@0] [0x10000183]: 0x00000007
[  265.308677@0] [0x10000184]: 0x0000003f
[  265.308682@0] [0x10000185]: 0x00000002
[  265.308689@0] [0x10000187]: 0x000000ff
[  265.308694@0] [0x10000188]: 0x00000003
[  265.320072@1] hdmitx: ddc w1b error 0x54 0x20 0x00
[  265.322088@1] hdmitx: ddc w1b error 0x54 0x20 0x00
[  265.324100@1] hdmitx: ddc rd8b error 0x54 0x21
[  265.440090@1] hdmitx: system: PHY Setting Done
[  265.444136@1] Sink is HDMI device
[  265.444154@1] hdmitx: system: packet: can't get vendor data
[  265.444161@1] 2160p60hz420 60 1
[  265.444168@1] 2160p60hz420 60 1
[  265.444172@1] hdmtix: set audio
[  265.444184@1] hdmitx tx_aud_src = 0
[  265.444212@1] hdmitx: fs = 2, cd = 4, tmds_clk = 594000
[  265.444217@1] hdmitx aud_n_para = 9408
[  265.444237@1] hdmitx set channel status
[  265.444298@1] hdmitx: audio: Audio Type: PCM
[  265.444305@1] fb: current vmode=2160p60hz420, cmd: 0x10000
[  265.458293@1] fb: osd[0] canvas.idx =0x40
[  265.458296@1] fb: osd[0] canvas.addr=0x7d100000
[  265.458298@1] fb: osd[0] canvas.width=15360
[  265.458300@1] fb: osd[0] canvas.height=2160
[  265.458301@1] fb: osd[0] frame.width=3840
[  265.458303@1] fb: osd[0] frame.height=2160
[  265.513813@0] fb: osd[0] canvas.idx =0x40
[  265.513815@0] fb: osd[0] canvas.addr=0x7d100000
[  265.513818@0] fb: osd[0] canvas.width=7680
[  265.513819@0] fb: osd[0] canvas.height=2160
[  265.513820@0] fb: osd[0] frame.width=1920
[  265.513822@0] fb: osd[0] frame.height=1080
[  265.525160@0] fb: osd[0] enable: 1 (kodi.bin)
[  267.200864@1] audio_dsp: buf=0
[  267.200878@1] audio_dsp: IEC958_mode_raw=0
[  267.200914@1] audio_dsp: IEC958_mode_codec= 0, IEC958 type 2 CH PCM
[  267.200919@1] audio_dsp: last mode 0,now 0
[  267.207579@1] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
[  267.207592@1] aml_spdif_dai: share the same clock
[  267.207602@1] aml_audio_hw: IEC958 PCM32
[  267.207609@1] hdmitx: audio: aout notify rate 44100
[  267.207614@1] hdmitx: audio: aout notify size 32
[  267.207618@1] hdmitx: audio: no update
[  267.207629@1] aml_snd_m8_card aml_m8_snd.47: i2s/958 same source
[  267.207778@2] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime->channels=2, same source mode(1)
[  267.207785@2] aml_spdif_dai: share the same clock
[  267.207794@2] aml_audio_hw: IEC958 PCM32
[  267.207799@2] hdmitx: audio: aout notify rate 44100
[  267.207804@2] hdmitx: audio: aout notify size 32
[  267.207807@2] hdmitx: audio: no update
[  267.207815@2] aml_snd_m8_card aml_m8_snd.47: i2s/958 same source
[  267.207951@2] channel count should be 8, we got 2 aborting

Display More

Pelican · [8.2.3.1] LibreELEC 8.2 for S905/S905X Pelican September 15, 2017 at 9:15 PM

Quote from roycejp

Hi,

How do I solve this ? Thank you!

The tar file is OK to use, probably you forgot to copy the dtb. Read the first post!

Pelican · [8.2.2.3] LibreELEC 8.2 for S912 Pelican September 15, 2017 at 8:46 PM

Quote from daniel

Hi

Does anyone have R-Box Pro Amlogic S912 3+16GB ?

I try all versions include 8.1.7 (2017-09-13) And always the same results:

1) The remote does not work

2) The first wizard always stuck

3) Changes made are not saved in the SD CARD after booting

Does anyone have dtb for R-Box Pro 3GB?

Display More

i have a similar box and I have/had similar problems.

1. It can easily fixed with editing remote.conf

2. I had to use another dtb to skip the stuck at first wizard screen. After install I can use kszaq's dtb.

3. Sometimes it saves some settings but mostly nothing remains after reboot. .update and folders are always read only.

I haven't reported this because I thought there are more serious problems to solve but now 8.1.7 is almost perfect so maybe it's time to deal with this problem.

Pelican · [8.2.3.1] LibreELEC 8.2 for S905/S905X Pelican September 15, 2017 at 8:08 PM

Quote from 2re

If you don't get a picture with 444, 12 then your TV don't support it.

if you log on to your box with ssh and type:

cat /sys/class/amhdmitx/amhdmitx0/attr

You should see what the settings are.

I know that, it list 6 or 7 supported modes but only 420,8bit and rgb works.

422 gives a green only picture, 444 gives no hdmi signal

Pelican · [8.2.3.1] LibreELEC 8.2 for S905/S905X Pelican September 15, 2017 at 4:20 PM

Quote from 62vette

So how can I check that LibreElec picked up the setting from the autostart script?

Why don't you simply believe it?
If I change something (like 444,12bit) then instantly no picture on my tv. So it definitely does something.

Pelican · [8.2.2.3] LibreELEC 8.2 for S912 Pelican September 14, 2017 at 5:12 PM

Quote from EduiT

Now, it's a good option buy a S912 HW for Libreelec or still better the S905 HW?

Thanks

Read the OP!

WARNING:

If you consider buying a device for LE, do not buy Amlogic S912!

Pelican · [8.2.2.3] LibreELEC 8.2 for S912 Pelican September 14, 2017 at 1:39 PM

8.1.7 working better than any previous version. (Freezing is still there.)

kszaq

I wonder if you ever tried to remove the 4k gui hack which prevent the picture viewer to show highres (4k) pictures to show their original b e a u t y.

P.S.: Why b e a u t y is censored on this forum?

Pelican · [8.2.3.1] LibreELEC 8.2 for S905/S905X Pelican September 13, 2017 at 10:36 AM

Quote from Daz

I see 8.1.7 is out, where's the change log?

It'll come at this evening.

Pelican · [8.2.2.3] LibreELEC 8.2 for S912 Pelican September 12, 2017 at 1:06 PM

I measure it in Celsius.

My S905X runs without turning it off and right now it's 54 C.

Pelican · [8.2.2.3] LibreELEC 8.2 for S912 Pelican September 12, 2017 at 12:56 PM

Quote from Forage

Some of the S912 (if not all?) boxes can get quite hot.

Definitely not all, because mine stays at fifty something in iddle and sixty something when playing a movie.

And this is the CPU temperature, the plastic box stays below hand warm.

Pelican · [8.2.2.3] LibreELEC 8.2 for S912 Pelican September 11, 2017 at 1:07 PM

Oh, you mean the fps what the debug screen shows...

That is changing of course.

But it changes on S905X too (LE7, LE8).

Pelican · Custom update Channel for S905/S905X Pelican September 11, 2017 at 9:43 AM

beaglenz:

Why do you want to upgrade those boxes?

What is the benefit to keep them up to date?

You just make trouble for them and for yourself.

Most of the "tech illiterate" people happily use LE 7 on their boxes without any problem.

Pelican

Quote from wrxtasy

so you cannot just unpack it out of the box and use with an IR remote.

I agree with your post mostly but this. The CEC was flawless on RPi so you can use it with the remote of the tv out of the box.

With amlogic boxes I haven't figured out yet why sometimes the CEC doesn't work.

Pelican

I haven't seen any M8S II with S905.

M8S was S905, M8S II is S905X.

The H96 Pro is working under LE, but S912 LE has some problem described in the S912 topic (freezes mostly).

Also some 4k video plays with little stops, so it is not perfect and maybe it never will (because the lack of the drivers).

Pelican

I'm using an M8S II which has much better remote then MXIII II has.
It can play even the highest bitrate UHD BD streams (like Lalaland) from my NAS.

In fact, I use it with a gigabit-USB adapter so I never had problem with the network bandwith.

I have several Raspberrys but they can play max. full HD but even for that you have to buy licenses.

Pelican · [8.2.2.3] LibreELEC 8.2 for S912 Pelican September 7, 2017 at 1:23 PM

Quote from the_bo

What number fps do you have while in movie library?

Do you see it dropping if you leave idle for awhile while browsing library.

What skin you using?

Thanks

My GUI settings is 2160p 60Hz.
It stays at 60 Hz even it goes to idle (dimmed screen) or browsing or do anything in the GUI.

I'm using the default skin.

Pelican · [8.2.3.1] LibreELEC 8.2 for S905/S905X Pelican September 7, 2017 at 11:43 AM

Quote from FoxBob79

Wow, you are amazing

Wow you are amazing

Pelican · [8.2.2.3] LibreELEC 8.2 for S912 Pelican September 5, 2017 at 7:08 PM

I haven't noticed any fps drops except when start to watch a movie and it changes to 24 fps.

Posts by Pelican

[8.2.3.1] LibreELEC 8.2 for S905/S905X

[8.2.3.1] LibreELEC 8.2 for S905/S905X

[8.2.2.3] LibreELEC 8.2 for S912

[8.2.3.1] LibreELEC 8.2 for S905/S905X

[8.2.3.1] LibreELEC 8.2 for S905/S905X

[8.2.2.3] LibreELEC 8.2 for S912

[8.2.2.3] LibreELEC 8.2 for S912

[8.2.3.1] LibreELEC 8.2 for S905/S905X

[8.2.2.3] LibreELEC 8.2 for S912

[8.2.2.3] LibreELEC 8.2 for S912

[8.2.2.3] LibreELEC 8.2 for S912

Custom update Channel for S905/S905X

Choosing a S905 / S905X / S905D / S905W / S912 box guide

Choosing a S905 / S905X / S905D / S905W / S912 box guide

Choosing a S905 / S905X / S905D / S905W / S912 box guide

[8.2.2.3] LibreELEC 8.2 for S912

[8.2.3.1] LibreELEC 8.2 for S905/S905X

[8.2.2.3] LibreELEC 8.2 for S912