Posts by sky42
-
-
some updates ... what was done:
special Spectre/Meltdown update with protection up too Foreshadow L1TF from 3 days ago
checker v39+ from here GitHub - speed47/spectre-meltdown-checker: Spectre & Meltdown vulnerability/mitigation checker for Linux
and if you are into details how to protect read here L1TF - L1 Terminal Fault — The Linux Kernel documentation
and some more insides here L1TF - L1 Terminal Fault Attack - CVE-2018-3620 & CVE-2018-3646 - Red Hat Customer Portal
8.2.5-3.42.3-4.14.63 in Generic here HiDrive
- kernel 4.14.63
8.2.5-6.42.3-4.18.1 in Generic here HiDrive
- kernel 4.18.1
8.2.5-7.42.3-4.18.1 in Generic here HiDrive
- kernel 4.18.1
-
Sorry rene12345 i have no idea what your issue could be.
-
And to see what is possible on resolution and fps you can use "xranr".
For me it looks like
QuoteDisplay Moretwang:~ # xrandr
Screen 0: minimum 8 x 8, current 3840 x 2160, maximum 32767 x 32767
DP1 connected primary 3840x2160+0+0 (normal left inverted right x axis y axis) 1600mm x 900mm
3840x2160 60.00 + 50.00 59.94 30.00 25.00 24.00 29.97 23.98*
4096x2160 60.00 50.00 59.94 30.00 25.00 24.00 29.97 23.98
1920x1080 60.00 50.00 59.94 30.00 25.00 24.00 29.97 23.98
1920x1080i 60.00 50.00 59.94
1280x1024 60.02
1360x768 60.02
1152x864 59.97
1280x720 60.00 50.00 59.94
1024x768 60.00
800x600 60.32
720x576 50.00
720x480 60.00 59.94
640x480 60.00 59.94
720x400 70.08
DP2 disconnected (normal left inverted right x axis y axis)
HDMI1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
1920x1080i 60.00 + 50.00 59.94
1920x1080 60.00* 50.00 59.94
1280x720 60.00 50.00 59.94
720x576 50.00
720x576i 50.00
720x480 60.00 59.94
720x480i 60.00 59.94
640x480 60.00 59.94
HDMI2 disconnected (normal left inverted right x axis y axis)
HDMI3 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
On the DP1 is a active DP 1.2 Adapter to HDMI 2.0 and the HDMI1 port is connected to my AVR just for audio
-
No that is not normal, that does even work on my haswell. But you can setup what should be hardware decoded under Settings -> Player -> Videos, but settings level needs to be expert. VAAPI needs to be on and you can switch on all the codecs.
-
careful the next 2 i have just compiled, but no tests so far
some updates ... what was done (just the changes):
8.2.5-6.42.3-4.18 in Generic here HiDrive
- clean build, but no testing so far
- kernel 4.18 with config from milhouse PR2880
- backported linux (Generic): update to linux-4.18 by MilhouseVH · Pull Request #2880 · LibreELEC/LibreELEC.tv · GitHub
- new kernel-firmware from LE master
- xorg-server pci_id patch update from 1.20.1
8.2.5-7.42.3-4.18 in Generic here HiDrive
- clean build, but no testing so far
- exactly like 6.42.3-4.18
plus
- LLVM 6.0.0
- Mesa 3D 18.1.6
2 new versions to test if you like.
The NUC has the latest BIOS and is there also HDMI Firmeware (like the older ones)? The last thing i would test is BIOS settings UEFI only with no CSM (my i3-8100 is running that way) or the last one no UEFI at all, after that i would become desperate and try windows 10 to see if it is doing 4k 60 Hz at all.
-
That is kind of tricky. All 3 components need to do the right thing. 4k UHD does not mean also with 60Hz. Look in the specs of you TV and AVR (deep). The NUC is capable of doing it, but there could be a firmware problem in all of the 3.
Look here (with ssh on the NUC) "less /sys/kernel/debug/dri/0/i915_display_info" and you see what the GPUs is willing to do with the connected hardware. Also try direct connect to the TV and look again. If that works connect the second HDMI to the AVR just for audio. My setup works that way with a i3-8100, because my Onkyo 818 AVR does not do 4k, but my LG TV 55E6D does. Sometimes it is one of the HDMI cables, but just some times when they are old. My Onkyo as a example can scale up to 4k on the Output, but HDMI Inputs are only capable of Full HD 1920x1080.
-
Kaby lake should also work with 8.2.5
-
some updates ... what was done:
8.2.5-1.42.3 in Generic, RPi2, RPi, Wetek_Play here HiDrive
- update Intel Microcodes to 20180807 just some Spectre/Meltdown protection, because the kernel is to old
- removed lvm2, mdadm packages and kernel config
-
some updates ... what was done:
8.2.5-3.42.3-4.14.61 in Generic, RPi2 here HiDrive
- kernel 4.14.61
- synced RPi2 kernel patches from LE master 4.14.54
- removed ir-mce_kbd-decoder.c patches, now in upstream kernel 4.14
- update Intel Microcodes to 20180807 Spectre/Meltdown protection up to v3a/4 (at least for my i3-4010U)
- update Nvidia driver to 390.77
8.2.5-6.42.3-4.17.14 in Generic here HiDrive
- full release post #123 (plus following lines)
- kernel 4.17.14
- synced kernel config from LE master 4.17.6
- updated improve-ir-timeout-handling patch from LE master 4.17.6
- removed ir-mce_kbd-decoder.c patches, now in upstream kernel since 4.17.12
- Gemini Lake GLK HDMI bugfix now v5 in upstream kernel since 4.17.12 (v4 patch removed)
- update Intel Microcodes to 20180807 Spectre/Meltdown protection up to v3a/4 (at least for my i3-8100)
- update Nvidia driver to 390.77
-
For kaby lake 1.42.1 should be fine. If you have a 4k TV 3.42.2 ist better.
-
some updates ... what was done:
8.2.5-6.42.3-4.17.6 in Generic here HiDrive
- full release post #123 (plus following lines)
- kernel 4.17.6
- synced kernel config from LE master 4.17.6
- updated improve-ir-timeout-handling patch from LE master 4.17.6
- updated Gemini Lake GLK HDMI bugfix now V4 from LE master 4.17.6
-
mdadm is in x. 42.1 and x. 42.2 but no longer in x. 42.3
I will consider to bring it back.
What hardware exactly is you NAS or the system where libreelec should run and what TV FHD or 4k? If it is not newer than apollo lake or kaby lake you are fine with my 8.2.5-1.42.1 with full lvm2 and mdadm raid support and you dont need updates. All the updates i do is for newer hardware.
-
some updates ... what was done:
8.2.5-3.42.3-4.14.52 in Generic/RPi2 here HiDrive
- version bump to .3 for removing lvm2, dm-raid (if somebody really wants it: respond in this thread)
- clean build
- kernel update 4.14.52
-
some updates ... what was done:
No more builds with 4.16, because it is now EOL.
Edited 1st post: removed 5.42, removing lvm2/mdadm announced, 6.42 now with kernel 4.17, removed Xin1 versions
8.2.5-6.42.3-4.17.2 in Generic here HiDrive
- just build new images from testing version 8.2.5-6.42.3-201806171607-4.17.2 (for 14 days running fine on my coffee lake)
- full release post #123
8.2.5-6.42.3-4.17.3 in Generic here HiDrive
- just kernel bump
-
Thanks and you are welcome, but you are in the wrong thread.
My 8.2.5 is not dead, but stable for the moment
I will release a 6.42 with autofix for Gemini lake HDMI patch, there is already a test version since 12 days.My 9.0-devel is in deed dead, because Milhouse builds are now with 4.17, Gemini lake hdmi autofix and amd support. So no reason for me to continue.
-
one more 8.2.5-6.42 with kernel 4.16 and GLK HDMU bug 105887 autofix (no kernel parameter needed).
Sireone for you and all the other GLK user
8.2.5-6.42.3-4.16.16 in Generic here HiDrive
- version bump to .3 for removing lvm2, dm-raid (if somebody really wants it: respond in this thread)
- kernel update 4.16.16
- added nuvoton_cir IR fix (at least for NUCs needed) HiassofT thanks
- [V2] drm/i915/glk: Add Quirk for GLK NUC HDMI port issues
-- remove i915.glkhdmi=1 or i915.glkhdmi=2 from /etc/syslinux.cfg
-- all should be fine
-
I try to reanrange my snapshot and build a 8.2.5-6.42.3-4.16.16 with the new GLK HDMI autofix and just a updated kernel. Nothing else changed.
