check my new build: Release rb-krypton2 · Raybuntu/LibreELEC.tv · GitHub
Tanks
starting from version 8.0b kszaq, what is the procedure to follow to install your new build?
check my new build: Release rb-krypton2 · Raybuntu/LibreELEC.tv · GitHub
Tanks
starting from version 8.0b kszaq, what is the procedure to follow to install your new build?
Hello,
thanks Raybuntu, and Kszaq for the work you do.
Yesterday I tried to install the hub nand wetek, version LibreELEC-WeTek_Hub.arm-8,0-rb-krypton1.img.gz of Raybuntu.
- I installed before LibreELEC-WeTek_Hub.aarch64-7.90.010.zip;
- Then I gave the command with putty: touch /storage/.update/.nocompat;
- Then I put in the update folder LibreELEC-WeTek_Hub.arm-8,0-rb-krypton1.img.gz.
E 'went well apparently.
I tried to play through LAN HEVC 23.976 fps film, but it was jerky.
Maybe I did something wrong during the installation?
The same film with the 8.0.0b version of kszaq have no problem.
It 'possible that the versions of Raybuntu, that are specific to wetek hub, work worse than the versions of kszaq?
Now I'm using the 'latest version of kszaq (8.0.0b) of the NAND wetek hub. When I play H264 and H265 seems to be going much better.
TraduttoreDisattiva traduzione istantanea
Inglese
Italiano
Francese
Rileva lingua
Italiano
Inglese
Spagnolo
924/5000
Hello,
thank Raybuntu, and Kszaq for the work you do.
Yesterday I tried to install on the nand wetek hub, version LibreELEC-WeTek_Hub.arm-8,0-rb-krypton1.img.gz of Raybuntu.
- I installed before LibreELEC-WeTek_Hub.aarch64-7.90.010.zip;
- Then I gave the command with putty: touch /storage/.update/.nocompat;
- Then I put in the Update folder LibreELEC-WeTek_Hub.arm-8,0-rb-krypton1.img.gz.
E 'went well it seems.
I tried to play through the network lan HEVC movie to 23.976 fps, but playback wasjerky.
I may have done something wrong in the installation?
The same film with the 8.0.0b version of kszaq have no problem.
It 'possible that the versions of Raybuntu, which are specific to wetek hub, work worse than the versions of kszaq?
Now I'm using the 'latest version of kszaq (8.0.0b) of nand of wetek hub. When playingH264 and H265 seems to be going much better.
For wetek hub, advise me to put LibreELEC-WeTek_Hub.aarch64-7.90.010.zip, then upgrade to LibreELEC-WeTek_Hub.aarch64-7.95.3.img.gz?
You have to add a device tree to make the remote control work. If you already upgraded to my build, you can simply do the update process again (even from the same build!) and the device tree will be updated. FYI WeTek Hub works perfectly fine with temperature sensor enabled.
i do not need to give the command "touch / storage / .update / .nocompat, after installing LibreELEC-WeTek_Hub.aarch64-7.90.010.zip to go from 64 to 32 bits? and then put your build and dtb.img file in the update folder to update? sorry if I get lost
You probably did not update your device tree - official LE and Raybuntu's builds use a different driver for IR receiver and therefore device trees are different.
[hr]
I'm sorry,
on a wetek hub starting from LibreELEC-WeTek_Hub.aarch64-7.90.010.zip, what is the procedure to install your 7.95.beta5b?
I have to give the command "touch /storage/.update/.nocompat" via ssh, and then put in the update folder, only the file LibreELEC-S905.arm-8.0-7.95.beta5b-temp_sensor_disabled.img.gz and restart?
or I have to also add gxbb_p200_1G_wetek_hub.dtb?
After installing the latest build of kszaq, on a wetek hub, the remote is dead.
How can I fix?
For a wetek hub, what is the procedure to do a clean install of nand last buid of Kszaq? It is now installed but are not sure you have done everything right.
[quote='lrusak','https://207.154.221.202/thread/?postID=32576#post32576']
Do that, then copy the file to the update folder and reboot
Fatto grazie
Take a look at wetekforums there are some zip files hosted to restore weOS. You need to restore those from android recovery.
sorry but I have not figured out how to move from LibreELEC-WeTek_Hub.aarch64-7.90.010.zip, your LibreELEC-WeTek_Hub.arm-8.0-rb-beta2b.img.gz.
I tried to put the file LibreELEC-WeTek_Hub.arm-8.0-rb-beta2b.img.gz. but it tells me that the update is not compatible ......
lrusak take a look at wetekforums and there was a discussion on slack. They have that in their warranty agreement. @ned_scott knows where exactly.
Ok thanks to restore Android simply repeat the same procedure with sd card and zip files wetek os? where I wetek os zip?
You'll need a zip file. Raybuntu probably doesn't provide it.
Download the official zip and install that to NAND then update to a Raybuntu build if that's what you want.
Ok thanks .... in summary:
1 - install from sd card recovery with LibreELEC-WeTek_Hub.aarch64-7.90.010.zip
2 - Updating putting in the update folder LibreELEC-WeTek_Hub.arm-8.0-rb-beta2b.img.gz
How are you guys testing 23.976hz playback? Sometimes I'll notice little jumps in the cadence of panning scenes etc, as if frames are skipped or there is a short lag, but I wonder if its my imagination, or an anomaly with the source itself, because I find its quite a difficult thing to spot for certain.With that in mind I found here that the Kodi project has provided some 23.976 testcard footage:
FPS_test_1080p23.976_L4.1.mkv - Google Drive
(Source: Samples - Official Kodi Wiki)But even with this I find it hard to tell for sure, either way (watching in todays beta5b build). My eyes are no good lol. What do you guys think watching this on beta5b? My box is S905 FWIW (Mini MX 2G).
As ever thanks to kszaq for all the hard work and heavy lifting.
I am reporting the same problem ... but no one answers me ... I thought succedese just me ... there are small picture shots during video playback to 23,976 hz
I'm sorry,
but I with a mini mx 1gb 8gb continuing to have the shots while playing movies 1080p 23.976 fps and 24 fps. I reproduce them from the local network. currently I use the beta 5, but I've always tried all libreelec versions with the same problem: every 20-30 seconds a small video shooting. It's normal?
I is coming an wetek hub ... I hope I have the same problem.
Thank's for your job.
I have uploaded 7.95.beta5 build with Kodi 17.0. I'm mobile-only now, will update OP in a few hours.
I'm sorry,
but I with a mini mx 1gb 8gb continuing to have the shots while playing movies 1080p 23.976 fps and 24 fps. I reproduce them from the local network. currently I use the beta 5, but I've always tried all libreelec versions with the same problem: every 20-30 seconds a small video shooting. It's normal?
I is coming an wetek hub ... I hope I have the same problem.
Thank's for your job.
Hello,
does anyone know if it can be installed on minix x6?
thank you
Hello,
I have a mini mx 1gb 8gb with libreelec of internal memory. The mini mx is connected to a Yamaha RX-V 465 with hdmi. TV a panasonic 50st60.
Both with 7.0.3.012f version, which with 8 beta 3 I have these problems:
- Playing with small shots with films 1080p 23.976 H264 - H265
- Autoframerate unstable
I'm planning to buy a Wetec hub. I would have the same problems?