Hi Guys,
i dont know if i'm here at the right adress but i dont know where to ask...
Well i own a new Mecool M8S Pro+. I tried to flash an alternative Update (M8SPro+TVStockROM) OTA but it failed.
Now would i try to flash the stock rom with the BurnCardMaker and the USB Burning Tool but both failed. The SD Card is not recogniced by the the Box and the Burning Tool did not find the Box. Then i soldered connectors to my board to read out the serial port:
Code
READ:0;0.0;CHK:0;
TE: 102658
BL2 Built : 13:38:48, Mar 8 2017.
gxl g8e12692 - xiaobo.gu@droid05
set vcck to 1120 mv
set vddee to 1000 mv
Board ID = 4
CPU clk: 1200MHz
DQS-corr enabled
DDR scramble enabled
DDR3 chl: Rank0+1 @ 768MHz - FAIL
DDR3 chl: Rank0 @ 768MHz - PASS
Rank0: 2048MB(auto)-2T-11
DataBus test pass!
AddrBus test pass!
-s
Load fip header from eMMC, src: 0x0000c200, des: 0x01400000, size: 0x00004000
aml log : SIG CHK : 230 for address 0x01700000
reset...
GXL:BL1:9ac50e:a1974b;FEAT:ADFC318C;POC:3;RCY:0;EMMC:0;READ:0;0.0;CHK:0;
TE: 102678
BL2 Built : 13:38:48, Mar 8 2017.
gxl g8e12692 - xiaobo.gu@droid05
set vcck to 1120 mv
set vddee to 1000 mv
Board ID = 4
CPU clk: 1200MHz
DQS-corr enabled
DDR scramble enabled
DDR3 chl: Rank0+1 @ 768MHz - FAIL
DDR3 chl: Rank0 @ 768MHz - PASS
Rank0: 2048MB(auto)-2T-11
DataBus test pass!
AddrBus test pass!
-f
Load fip header from eMMC, src: 0x0000c200, des: 0x01400000, size: 0x00004000
aml log : SIG CHK : 230 for address 0x01700000
reset...I think my board is in some kind of bootloop and i dont know how i could repair this(after reset... everything repeats). Did anyone had this problem and was able to solve this?
Thanks!