Posts by 5schatten

Quote from jureko

Hi,

I'm trying to get working temp sensor (DS18B20, 1-wire). My board is Odroid-C2. Have Rpi with DS18B20 too, but with raspbian - working ok.

I was read this thread, and found some tips (write "dtoverlay=w1-gpio, gpiopin=4" in /flash/config.txt) but is one problem: dont have dtoverlay, dont have w1-gpio modules. Is it problem?

Code

LibreELEC:~ # dtoverlay -l
-sh: dtoverlay: not found


LibreELEC:~ # modprobe w1-gpio
modprobe: FATAL: Module w1-gpio not found in directory /lib/modules/3.14.29

Yesterday i was switch my Libreleec to Libreelec RR (adding unofficial source from #1 site),

Is it posiible to have working DS18B20 temp sensor on my Odroid?

The Raspberry Pi is a complete different board than your Odroid C2. So you have to look into odroid forums if and how you can add this.

rooty

libreelec-generic.x86_64-9.1-rr-20190327-59f53c8.tar

Quote from rooty

But that's what I'm trying to explain, by default this is disabled . If you didn't turn it on, it's disabled for you, same as for many users.

When this is disabled you don't care about 23.xx Hz media because automatically that becomes 60 (or whatever your kodi defaults) Hz media. By enabling the option video plays even more smoothly, so I like to use this option.

All of my systems have this option enabled. So all my Intel or ARM based stuff and I have no problems with delayed audio

I disabled it anyway & I'm uploading a new build that you can test.

Quote from BlaBla1973

Sorry, where can I find the zip?

Read the start post I've linked the steps. So you already tried to blacklist the kernel module? Basically there are two options either the new Nvidia driver has still audio issues but it works here & all output devices are listed. Or option B the Linux Kernel 5.0 doesn't work out of the box with your CPU.

Quote from BlaBla1973

checked... No audio.

Log:

The log zip not a Kodi debug log.

Quote from rooty

ah, I see. No, what I meant is to build a docker image with LibreELEC to test stuff, not the opposite . So let's say I'd like to bundle my own package to LibreELEC build and I also want test it. It's kinda time consuming to deploy the image to a device after each compile procedure, would be cool to make docker image instead to plug the image with docker and test a package right away.

I don't think that that's the intention of a Docker image. What you need is a VM. Also keep in mind that a VM does not exactly reproduce a real system and all of it's quirks.

Quote from rooty

So, you're saying you have this enabled on your x86_64, and you don't experience any audio delay for 23-24 Hz media?

I have plenty of 23.xx Hz media and never thought that the audio is out of sync. I guess if this would be a common problem many users would complain about it.

Quote from BlaBla1973

Because the display port is 1?

Well post a full log zip. I've carried my kitchen TV now to my workstation and it works flawless with my Nvidia GTX 1060.

Maybe you have to blacklist snd_soc_skl too. I have no clue if the Intel card just sends the audio through the GTX card.

Quote from BlaBla1973

I use the display port (dp-1) for video and hdm1(display port) for audio(alsa hda Nvidia,onk av receiver) on RR-20190314. And the same setting for the 20190326

Why connector 1 and not 0 so the first device in the list. Upload a screenshot of your audio output device list in Kodi.

Quote from BlaBla1973

After the update from RR-20190314 to this one, the audio stop working in kodi.

Kodi log :

What audio output did you chose in your Kodi audio options?

Quote from icehot

Hi, thanks for the job jernej!

I currently have openelec 7 version in a orangepi plus 2e and it works great.

To change to LE9 I would need to run a*******m and be able to install on the emmc.

Does anyone know if you can install a*******m in this version?

How to install in emmc?

Thanks!!!

Display More

https://kodi.wiki/view/official:forum_rules/banned_add-ons#add-on_blacklist

Quote from escalade

There's tons of stuff still in place that isn't needed anymore

This specific hack has been around since the OE days, it got obsoleted after haswell generation managed to do 23.976 fps correctly.

The only question is if this is still an issue Refresh Rate Handling - 23.976 Hz Works! - Intel's Haswell - An HTPC Perspective: Media Playback, 4K and QuickSync Evaluated

Well using the search function and maybe this is also an idea:

modifying mounting point of usb storage

Quote from Kupo91

I think I had a bit of success. It works if I enter systemctl start storage-roms-ps2.mount so it obviously fails to activate the mount file during the boot process. I think this line Before=kodi.service in the [Unit] part might be the issue but just removing it didnt bring the solution.

Any ideas?

Edit:

log-2019-03-27-11.00.28.zip

This template works fine. I don't know if Kodi handles the mount of media files so it could be possible that it does not work if it tries to mount it before Kodi is up and running. Anway your log file blamed a missing or wrong path so I think the problems lies somewhere else.
[Unit]

Description=Emulation RAM disk
Requires=network-online.service
After=network-online.service
Before=kodi.service
[Mount]
What=tmpfs
Where=/tmp/emulation
Options=size=256m
Type=tmpfs
[Install]
WantedBy=multi-user.target

But if Kodi handles the mount process then your sd card is not available before Kodi is running so this could do the trick:

[Unit]
Description=SD-Card for Roms
Requires=kodi.service
After=kodi.service
[Mount]
...

Quote from rooty

how did you build a docker image with LibreELEC and all dependencies? I've been trying to find this for awhile, so far found zero informations in LibreELEC docs..

Well it's an Arch image for PCSX2 not for any other purpose. If you want to use a Docker image for building purposes then you should have a look at:

LE8 "Remix" (Generic/RPi) Emulationstation/Chrome/Spotify (read the first post before posting) (at the bottom of the post)
Docker Hub
Docker Hub

Escalade used to provide some build images but I don't know if they are still suitable for LE 9.x. but since he tries to build a XU4 image at the time I guess he still uses this image. You can check here LibreELEC.tv/checkdeps at libreelec-9.x-rr · 5schatten/LibreELEC.tv · GitHub if any dependency is missing.

Quote from rooty

5schatten I'd like to bring up one more thing to discuss.

I spent like a day to figure out why my audio is out of sync with video, delay is ~200ms (at some point I figured out it's actually 175ms, *sigh*)

This happens only when "Adjust display refresh rate" is enabled, so I'm guessing that's why we don't really have a lot of complaints. This was not the case in escalade's build.

I found a solution online to create advancedsettings.xml with some settings, tho I didn't like this approach so I decided to ask this question at Kodi forum. Mr fritsch pointed me to check advancedsettings.xml, I was sure the file was not created......I was wrong *sigh* . It's actually packaged.....in here "/usr/share/kodi/system/advancedsettings.xml" .

Then I was wondering why escalade's build was ok, and I found this . Apparently this audio delay fix is obsolete and now it causes this issue.

Do you think it's worth to merge the escalade's commit or at least give some notes at the first page. Thanks

Display More

You have to consider that escalades build was LE 8.2.x + Kodi 17.6 and mine is based on LE 9.x + Kodi 18.1 so they have not that much in common anymore. Also the question is if this fix isn't needed anymore why is it still in place? Anyway this is not build specific but something vanilla LE should take a closer look at. I asked in the dev channel for more details about it.

I use the variable refresh rate on all of my systems so ARM & Intel based systems and some with AVR and had no problems as far as is can tell.

But I'm pretty sure this could be resolved by manually creating the advancedsettings.xml file and adjust the rate to your display.

advancedsettings.xml - Official Kodi Wiki
Userdata - Official Kodi Wiki

The delay should only be valid for media with 23,xx Hz fps & so I guess you could also set this to zero as workaround.

Check the path. Have you deleted the default PS2 folder? Again every character has to match.

Quote from Kupo91

What do you try to tell me with this command? Do you want me to type in and show you the content of the conf file?

Run the command in a terminal.

Active: failed (Result: exit-code) since Tue 2019-03-26 16:45:21 CET; 1h 11min ago

Your mount file is somewhat wrong so it's not loaded as it should.

Quote from Kupo91

Code

LibreELEC:~ # snd_soc_skl
-sh: snd_soc_skl: not found

log-2019-03-26-15.39.53.zip

Code

LibreELEC:~ # mkdir -p /storage/.config/firmware
LibreELEC:~ # wget http://milhouse.libreelec.tv/other/dfw_sst.bin -P /storage/.config/firmware/
Connecting to milhouse.libreelec.tv (138.68.75.163:80)
dfw_sst.bin          100% |*********************************************************************************************************************************************************************************************| 24772  0:00:00 ETA
LibreELEC:~ # reboot

log-2019-03-26-15.46.45.zip

Okay but where is the difference to my file name

Also the other mount file which was created by this process? The one in multi-user.target.wants folder storage-.config-system.d-multi\x2duser.target.wants-storage\x2droms\x2dps2

Read the posts I've written:

echo "blacklist snd_soc_skl" >>/etc/modprobe.d/blacklist.conf

The difference should be obvious storage-roms-ps2.mount = storage/roms/ps2.mount = /storage/roms/ps2

Quote from Kupo91

Oh didnt see that. Ye I already reverted the upgrade but I can do it once again

Would be nice.

Also I guess your filename is completely wrong. Rename it to storage-roms-ps2.mount and enable it again. But before enter systemctl disable /storage/.config/system.d/x2dps2.mount.mount or whatever the name was to disable the wrong config.