thanks, very sad.
It worked, changed PCIe Link speed from Auto to Gen 1 as in above post. Thanking you, most appreciated.
thanks, very sad.
It worked, changed PCIe Link speed from Auto to Gen 1 as in above post. Thanking you, most appreciated.
yep, have already done that and cant find the setting, will keep looking??
ps. just installed LE 9.95.1 on some older hardware, the Hauppauge Tuner was visible, seems I have a hardware comparability problem with the new motherboard??
Hi please see attached the lspci log, I don't seem to see the card? The hardware I am using is brand new, motherboard Asrock B460M PR04, wondering if there is an issue there?
Hi, Tried reseating the PCI-E card, tried different slots and even tried a spare card that i had, all producing the same result of no card in the TVHeadend tuner list. It definitely works with LE 9.2.6 however not LE (10.0) which actually is 9.95.1. I then tried to go back to 9.2.6 however lost access to the LE repository. Sadly not winning with Hauppauge. I did try a Realtek USB tuner which worked however no where near as good as the Hauppauge.
Hope it is a driver inclusion issue that will be fixed during subsequent LE releases.
Hi, just produced the system log with Hauppauge tuner not in Tuner List:
Hi, the tuner is Hauppauge "WinTV-HVR-2200 DVB-T Multi-PAL 89619 Rev D1F2. It is a high quality Pci card dual tuner that worked with LibreELEC 9.2.6. I remember some time ago when moving from Kodi Krypton to Leia it was not in the driver library however then added, possibly this is the case again?
I can have a go at the "journalctl | paste" later.
typo: the card is PCI-e
Hi, many thanks, it works, I can now access the Server however have another problem. My Hauppauge tuner is not showing up in the tuner list?
Hi I have tried both 4.2 and 4.3 in all combinations and neither can be accessed. I have done this many times with the earlier releases of Libreelec?
ps. it works fine with Libreelec 9.2.6, also I can't go back to this as I have purchase new hardware, the new GPU is not supported by 9.2.6 not 10?
ps2. sorry typo, GPU works with Librelec 10
hi I am a long time user of Libreelec x86_64 and use TVheadend for TV tuner, I have just upgraded to Libreelec Matrix 10, ufortunately can not access the TVheadend server to configure the tuners from an external pc. It seems I cant access port 9981, the network address to libreelec is ok. Am I missing something, can anyone help?
don't know, I did pay for it. anyway thanks again
Not certain either from my perspective. I think the "unauthorized" is not stopping the m3u download as i can see it in the Addon Data Folder.
What I know is when I enter the same m3u URL address and the EPG url address
the PVR Simple Client does not return anything into Live TV. I think this issue could be in the EPG. Also it works in LE 8.5 but doesn't seem to in LE 9.01.
Any way thanks for your help, I will keep playing around with it at my end. Regards
I get:
wget: server returned error: HTTP/1.1 401 Unauthorised
The file is however downloaded as I stated earlier and stored in iptv.m3u.cache.
It seems the m3u file is downloaded after all however the epg file is not in simple client/addon data folder. This is creating a problem in Simple client??
Hi server is portal.geniptv.com:8080 etc.
Hi,
looked into the /storage/.kodi/userdata/addon_data/pvr.iptvsimple folder (using WinSCP) and found the m3u list downloaded ok, the settings xml seemed to look ok however no cache folder for the epg, I think this could be the problem. The URL is epg.xml.gz.
As above I tried using SSH on the epg file and it worked ok. (screen shot attached)
Hi as request have run the SSH with your command, Debug log attached.
I noticed a reference in the log to IPV6 is this relevant?
Again I tested my address using Firefox browser and it worked.
Hi, managed to provide a log (attached). This is a clean build of Libreelec 9.0.1
1. Uses Simple PVR client, the same issue occures for other guide programs.
2. Entered m3u and epg URL paths. Have removed from log as it has my personal info. (did test using browser and all ok)
3. Opened TV and no Channels nor Guide.
Not a DNS issue, however just trying to help, the issue is fundamental. Will not post again. Regards