Posts by alon24

nope

i sshd in and ita not in media not in storage

[ 6930.350125@0] aml_snd_m8_card aml_m8_snd.45: I2S playback disable
[ 6930.350142@0] aml_snd_m8_card aml_m8_snd.45: IEC958 playback disable
[ 6930.350205@0] aml_spdif_dai: aml_hw_iec958_init,runtime->rate=44100, runtime-                                           >channels=2, same source mode(1)
[ 6930.350213@0] aml_spdif_dai: share the same clock
[ 6930.350222@0] aml_audio_hw: IEC958 PCM32
[ 6930.350230@0] hdmitx: audio: aout notify rate 44100
[ 6930.350234@0] hdmitx: audio: aout notify size 32
[ 6930.350237@0] hdmitx: audio: no update
[ 6930.350243@0] aml_snd_m8_card aml_m8_snd.45: i2s/958 same source
[ 6932.159462@2] usb 1-1.3.3: USB disconnect, device number 5
[ 6932.171363@3] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 6932.171615@3] sd 0:0:0:0: [sda]
[ 6932.171631@3] Result: hostbyte=0x01 driverbyte=0x00
[ 6934.186654@2] usb 1-1.3.3: new high-speed USB device number 8 using dwc_otg
[ 6934.289652@2] usb 1-1.3.3: New USB device found, idVendor=125f, idProduct=a35                                           a
[ 6934.289699@2] usb 1-1.3.3: New USB device strings: Mfr=1, Product=2, SerialNu                                           mber=3
[ 6934.289753@2] usb 1-1.3.3: Product: HD650
[ 6934.289782@2] usb 1-1.3.3: Manufacturer: ADATA
[ 6934.289810@2] usb 1-1.3.3: SerialNumber: 447166A76005
[ 6934.292169@0] usb-storage 1-1.3.3:1.0: USB Mass Storage device detected
[ 6934.292703@0] scsi1 : usb-storage 1-1.3.3:1.0
[ 6935.298111@3] scsi 1:0:0:0: Direct-Access     ADATA    HD650            5438                                            PQ: 0 ANSI: 6
[ 6935.302337@2] sd 1:0:0:0: [sda] 3907029164 512-byte logical blocks: (2.00 TB/                                           1.81 TiB)
[ 6935.302929@2] sd 1:0:0:0: [sda] Write Protect is off
[ 6935.302949@2] sd 1:0:0:0: [sda] Mode Sense: 23 00 00 00
[ 6935.303550@2] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, do                                           esn't support DPO or FUA
[ 6938.482405@2]  sda: sda1
[ 6938.486642@2] sd 1:0:0:0: [sda] Attached SCSI disk
[ 6945.356333@0] aml_snd_card: audio speaker off

I have beelink m18, s905 with Le 8.2.5 on it.

I cannot get my usb drive, ntfs, to show in it.

IS this a known issue, how do I fix

So I was able to mount /dev/mmcblk1p/flash now what
(Notice it's blk1 and not blk0)
I have boot, grub.cfg, syslinux.cfg and others there

Now what

Directly, in the debug session
I did not think SSH would work, because it does not boot, mount

Cannot find /flash in /proc/mounts

My machine is iz37.

How do I mount manually?

Hi,

Tried to install your version on my tronsmart iz37 based om recomendation from tronsmart forum

I already have the base libreelec installed with grub and all, and try to use your version as update from tar
This is based or piotrasd said:
2607-libreelec-8-special-build-for-iz37-by-tronsmart?limitstart=0#15996

But I get this, with all atom versions I tried: (latest i tried is 0108 - LibreELEC-Generic.Atom.x86_64-8.0-devel-20170108)

*** Error in mount_flash: mount_common: Could not mount /dev/ mmcblk0p1 ***
### Starting debugging shell ... type exit to quit ###
sh: can not access tty: job control turned off
#

Can you help me understand and fix the issue?

maybe this is because the drive is called mmcblk0 ??? (when i install the libreelec base)

Thanks for your work
7.0.2.6 now works for my MXIII+ now

I had 008 on internal emmc.

I updated to 009 on my Internal emmc (not usb) but,
I did not put the device tree file in the update dir (stupid)
I now have no sound devices.
Can I fix this , or do I need to reinstall android and then install from sd card?

I am using Beelink M18

@ kszaq How do I know which to select?

Tried with many on sd card, nothing works (figured if any thing should work, booting from sd card would be the one).

Cannot get it to work

I have Beelink M18, I put andoir on it (MX64_105L1.img) and then tried to put the 007 version on usb card and added the dtb file from here:
LibreELEC

I tried the recovery option with the 2 full usb, and one otg port, but it does not load libreelec
it says it is waiting for adb sideload, but does not boot (it goes to recovery every time, so no issue there).

Has anyone tried this version on M18?

Is there a chance to get the external keyboard config working, ?

LibreELEC

Support for switching Phisycal keyboard languege
Can this solution be made availble here,
OpenELEC Mediacenter - OpenELEC Forum - [SOLVED, partially] Layout switch button, Feature request (1/1)

Need setxkbmap to set the second lang, need 2 setting in libreelec config for second hw keyboard lang

How can we make this happen?

Can u please share which z8300 can install openelec?
Link?