Posts by kszaq

  • 7.0.2.006 build for S905

    Quote from xsi


    Regarding the memory issue with RAM filling up I found this on the kodi forum from wrxtasy, seeming to suggest that this is a Kodi memory leak issue ? he also suggests it has been fixed, but where is the fix ?

    The fix is included in this build so it looks like the reason is elsewhere.

  • 7.0.2.006 build for S905

    Quote from ram.khakurel


    I have that too ,same issue.my sd card file shown in pic.got dtb and recovery img from android fw and ledtb.img from device tree for mxq pro 4k.

    Delete aml_autoscript and try again.

    Quote from lama0900


    Same for me with Mini M8s II
    tried with toothpick method and deleted dtb of course.

    You can try not deleting dtb.img, although in that case USB port and Ethernet might not work. Also make sure that you have the latest Android version installed before trying LE.

  • 7.0.2.006 build for S905

    Quote from Nofan Tasi


    BUT: still dvb kernel modules do not load. They are in 3.14.29-media_build

    Thank you for noticing this! I needed to change drivers install path and now they should work. Please re-download, update and check!

    Quote from lowsum


    Which dtb file for mini m8s? I just tried the one for mini mxIII and the update went fine but my wired ethernet connection is no longer accessible. I see from libreelec config that it use ip 169.254.228.34 which doesn't make sense. Wifi is working tough.

    Ups. Missed device tree for that one, I though I have double device tree for "M8S II". Give me a few minutes, I will upload it soon. Thanks to JonSnow for pointing me to correct device tree.
    [hr]

    Quote from ram.khakurel


    I have got extraxted zip file in sd card.also ledtb.img for mxq pro 4k.when i do toothpick method,the box splash logo comes and goes and again comes ,dont get install progress .
    Pls advise what i am doing wrong.

    You should also have recovery.img and dtb.img from Android firmware on SD card, as advised in installation instructions.

  • 7.0.2.006 build for S905

    Quote from JonSnow


    will we need to update future NAND builds the same way or just a one time thing?

    One time thing until there is a need to update device tree again.

    Quote from JonSnow


    in system info cpu temp is no longer displayed.

    Unfortunately the latest thermal driver doesn't work with GPU driver and it wasn't available until 3 days ago. I thought it's better to not delay the build. Maybe I can fix this for a future build.

    Quote from quitroot


    Would dvb-t2/s2 works with tvheadend on KII PRO device?.

    No, I still don't have a driver for internal tuners that I can use and box manufacturer is "considering" my request for the driver.

    Quote from pawnthep


    Yes, I did delete the dtb.img file and got the error.

    I'm afraid I can't help you either as I don't have any S905X box. Nexbox is also a bit pain to work with, unless someone PRs me a change there's not much I can do.

    Quote from kostaman


    T95N-2G Mini M8s Pro. SD Fresh Install.
    Stuck on Android boot up logo.

    Toothpick method used.

    I supplied dtb.img for this box in device trees needed s905 post:
    https://forum.libreelec.tv/thread-1223-p...ml#pid9361

    Downloaded the device tree that was used for this box from below link.
    http://kszaq.libreelec.tv/s905/7.0.2.006...0_t95n.dtb
    I hope this is the correct device tree ? Just trying to confirm.

    Fresh install replaced the device tree with the downloaded one.

    You should use this one: gxbb_p200_2G_t95max.dtb

    I will upload appropriate device tree soon. I thought is was the same to T95N Max. Sorry, it was 3 A.M. :(

    The one you linked is for T95N with 1GB RAM and 100Mbps Ethernet.
    [hr]

    If you're using external DVB tuner, please re-download the build and update as usual (.img.gz to Update folder). I have fixed media_builds modules path.

  • S905 builds - general discussion

    New build posted in separate thread: if you rushed your update and your device doesn't boot - fear not, look for Updating SD card release instructions there.

    And remember that this thread is for chit-chat, if you want to post a bug look for a thread that already mentions that bug or create a new one so that other people can find it easier in the future!

  • 7.0.2.006 build for S905

    This is a thread for new build that comes after a few weeks of (slow) development. Since it contains a new kernel that requires a bit more work to be installed I decided to create a new thread. Please read the whole post before rushing to updating/installing and testing!

    7.0.2.006 Work-in-progress build 006 (2016-08-20)

    Changelog:

    • updated Amlogic kernel to 2016-07-01 with Mali r6p1 driver thanks to Codesnake
    • updated kernel = (unofficial) S905X support
    • CEC driver updates from Raybuntu
    • kernel modules updated to 2016-08-18 Amlogic release
    • revised Kodi patches for improved playback experience:

      • fixed 10-second delay bug (thanks to Koying)
      • disabled Hardware decoding of Hi10P videos
      • v17 backport: bumped software decoder threads number for better performance
      • v17 backport: fixed TextureManager memory leak
      • minor playback improvements from SPMC
    • updated DVB drivers from media_build package
    • different set of Kodi patches for resolution switching to fix 720p <=> 1080p transitions
    • rewritten installation procedure for internal memory to avoid "Unknown filesystem" errors
    • Realtek 8189FS driver is now included
    • Realtek 8723BS Bluetooth firmware is now included
    • added a possibility to boot from USB
    • disabled power management for Broadcom WiFi for better responsiveness
    • something I forgot?

    Known issues:

    • Suspend doesn't work and when it works, device doesn't wake up properly. Temporary solution: use poweroff. IR power button switches the box off due to this bug.
    • Temperature reading not available.
    • 4K output doesn't work properly due to patches that fix resolution switching. To troubleshoot this, I ask 4K TV owners to paste output of cat /sys/class/amhdmitx/amhdmitx0/disp_cap command. Please don't paste this for 1080p TVs.
    • Jerky playback of some 29.97fps videos and some Live TV channels (Amlogic HW decoder bug).
    • CEC might not work when your box has incomplatible u-boot or your TV is not that well supported by Amlogic low-level CEC driver.
    • Multichannel PCM audio doesn't work.
    • Lots of other things that I did not notice.


    Source code: GitHub - kszaq/LibreELEC.tv at 7.0.2.006
    Kernel source code: GitHub - kszaq/linux at e1b40e416504263eb53a0bad35b422a046d29b6e
    Downloads: 7.0.2.006

    How to install:
    [hr]
    CAUTION: Read the instructions carefully. Installation procedure has changed since last release!

    I strongly recommend trying running this release from SD card/USB drive before installing to internal memory!

    If you have WeTek Hub, you don't need to use toothpick method: update to latest Android version and make use of dual-boot feature!

    SD card/USB drive:
    Note: only 1 USB port is able to boot the box. You have to try them all.

    • Download img.gz file and burn it to SD card/USB drive: Installation - LibreELEC
    • After this you will see that drive capacity is 512MB. This is OK as there is a second (hidden) partition on the drive for LE userdata!
    • S905: Download a device tree for your box from device_trees, rename it to dtb.img and copy it to main folder of SD card/USB drive - replace the one that's already there.
      S905X: Delete dtb.img from main folder of the card/thumb drive. These devices should already have device tree compatible with the latest kernel.
    • To boot the system for the first time you have to use one of the following:

      • toothpick method: disconnect the power supply, insert card/drive, use a toothpick to push reset button and connect the power while holding the button. Wait until LibreELEC logo appears and release the button.
      • recovery method: boot into Android, insert card/thumb drive and choose Reboot to recovery. Your box should boot into LibreELEC.
    • You have to do step 4 only once. You should repeat step 4 if booting from SD fails after Android reconfiguration/update. Don't worry, it won't delete your data.


    Internal memory (NAND/eMMC):

    • (This step is not needed when you have Android on internal memory) Download Android firmware for your box - you should get it from manufacturer or seller - and extract 2 files: recovery.img and dtb.img to your SD card.
    • Download zip file from LibreELEC release folder.
    • Unpack downloaded file to SD card/USB drive - you should now have 5 files on your card: aml_autoscript, factory_update_param.aml, a zip file with an update, dtb.img and recovery.img.
    • S905: Download a device tree for your box from device_trees, rename it to ledtb.img and copy it to main folder of SD card/USB drive.
      S905X: Extract dtb.img from factory Android update, rename it to ledtb.img and copy it to main folder of SD card.
    • Insert SD card to your box and use "toothpick" method to install it. Alternatively you can boot into Android Recovery and install it manually.


    CAUTION: To boot into recovery after installing LE to internal memory use this procedure:

    • prepare a clean, FAT32-formatted SD card or USB drive
    • copy recovery.img and dtb.img from your Android firmware to SD card (don't use dtb.img for LE!)
    • use "toothpick" method to boot from SD card/USB drive

    Updating SD card release:

    • Update as usual: download img.gz, copy it to Update folder and reboot.
    • Wait for reboot procedure to complete.
    • After you device reboots and stops on first logo, connect the card to your computer, download aml_autoscript from release folder and replace the one that you already have on your card.
    • Download device tree and copy it to card: follow step 3 from SD card installation procedure.
    • Use toothpick method to boot the box.


    Updating NAND release:
    Follow procedure for new install. Your data won't be affected.