If I connect the soundbar directly to the raspberry pi. I would gain Atmos TrueHD capability on that device. On the other hand all the other devices connected to my TV would lose the ability to use the soundbar. I was wondering if there is a way to have both. As in splitting the the HDMI of the soundbar to go both to the TV and to RPI
Posts by BoKKER
-
-
Da Flex would there be a way to have the ARC go to the TV also? I am thinking about my ps4 which is really the only other device that I use with ARC. I cant find much info on eARC working on RPI either. I can always give it a try!
-
It is gen2, but my TV does not support ARCe. So that might be the problem!
-
Possible solution on the bottom!
I am facing this strange issue:
- pi4 running Libreelec 12.0.1
- start playing h265 HDR DRM_PRIME video
- TV turns on HDR mode
- no sound, smooth image playback for about 4 seconds. Then the image stops and never continues.
- subtitles keep playing
- jellyfin addon, jellyfin states no transcoding is being done
- sonos beam soundbar, sound issue could be related to this. I can probably figure that out once image plays.
Things I tried and failed:
- I originally thought this was due to network speed. But I can saturate my gigabit connection using iperf3 between the server and client
- Enabled cpu overclock in config.txt
- Enabled 60fps in config.txt
- Caching 64mb, read factor 4x
- Whitelisted:
- 3840x2160 @ 60/59.94/50/30/29.97/25/24/23.976
- 1920x1080 @ 60/59.94/50/24/23.976
- Set System -> Resolution -> 1920x1080p
- Set the Adjust Refresh setting to "On Start/Stop"
- Originally this was happening on an older version of kodi 19.1, update didnt help.Some info about the media:
Audio Channels
7.1
Audio Codec
TrueHD Atmos
Video Bit Depth
10
Video Codec
h265
Video Fps
23.976
Video Dynamic Range
HDR
Video Dynamic Range Type
HDR10
Resolution
3840x2160
Scan Type
ProgressiveAny help is appreciated, I am going to comb the log files now also.
EDIT: After searching the logs I found that it might be an audio issue, I googled and my TV might not support eARC, disabling TrueHD Atmos in kodi made the playback smooth.
-
drivers - Intel e1000e Ethernet not working - Ask Ubuntu based on this it seems to be a bios issue. So pulling out the nuc and waiting 10 minutes helped. Just as changing hardware configuration helped in your case. will see how long it will last..
-
intel nuc6cayh running newest build from escalade. Ethernet worked in the past but one day just stopped getting a IP address. Feels like its disabled.
SNYe 22:48:14.004 T:140213057744192 NOTICE: special://profile/ is mapped to: special - Pastebin.com
-
On my vizio tv I have to enable full uhd color on the hdmi input settings to be able to view 4k at 60hz. Looks like sony calls it something different. In your settings you will need activate hdmi enhanced on the hdmi port you are using.
thank you this helped me. I dont really know why would it be off from the start to begin with, but now finally I was able to get 60fps. I will see how it performs over time but I am happy, Thank you everyone
now only to figure out why there is no audio
edit:fixed
-
using all 3 of the xrandr commands in the autostart.sh file was finally what worked for me. Thanks mglae you are a lifesaver.
xrandr --newmode "3840x2160p60" 593.41 3840 4016 4104 4400 2160 2168 2178 2250 +hsync +vsync
xrandr --addmode DP1 3840x2160p60
xrandr --output DP1 --mode 3840x2160p60
with these 3 commands on 0710 I end up with black screen on my tv stating no signal.
-
I cant get your build LibreELEC-Generic.Haswell.x86 to work. All other builds work except that one. It hangs on the syslinux bootloader window. any workaround???
-
I cant get your build LibreELEC-Generic.Haswell.x86 to work. I tried updating, I tried installing from a USB, I tried manually replacing files. What am I missing? The screen always gets stuck on SYSLINUX 6.03 (bootloader prob)
-
hm Its probably just me, I tried to flash the image using the USB tool it did not work, I ended up with a badly formated usb. I tried to flash a normal image to get the boot manager on the USB. Then overwrite the files on the usb with the files from your tar archive but it still wont boot. am I missing something ? maybe gwilly7 will have more luck
-
I will be trying tomorrow this, drivers - External screen recognized, but black - Ask Ubuntu
I am running today tests on windows.
-
yes I did use DP1. I used this tutorial Using xrandr and gtf to add a new mode to your X configuration at runtime | arunviswanathan.com
-
I did install windows today too to check that there it works. too bad I did not see your post. It would have saved me a few hours. I added 60 fps 4K with xrandr but I always end up with the
xrandr: configure crtc 0 failed
error. I tried to tweak it but I did not manage to get it work.
-
they both have a hdmi 2.0 port. even tho one of the sites stated only 1.4 for my TV but it seems that a firmware upgrade enables 2.0 on older models. I do have a updated system. but will keep looking for bugs if I find something wrong with the setup. TV and the NUC only have hdmi. no display port
-
I just tried your build and its the same thing. 3840x2160p@30fps max.
-
-
