Something useful might be found here: How Test ethernet bandwidth (LAN)?
Posts by ChimeyJimmey
-
-
I would suggest to ask here: Issues · asciidisco/plugin.video.netflix · GitHub
Netflix and Amazon VOD are tricky ones, sometimes issues are remedied by simple copying addon folders from a working box...
-
Yet,
an S905 box with a "wrong" dtb behaves just like that.
Once the dtb is replaced with a "proper" one - power on from remote works again...
-
For 9.0 use the same dtb as per 8.2...
-
Another 2 cents on the H96Pro+...
- Original package cooling is crap. It HAS to be modded.
- L3 certified. Even in original Android - forget about HD streaming from Amazon, Netflix and such.
- If you flash another ROM, u-boot will be tampered - most probably LE will note wake up from power off.
In LE most annoying things are:
- remote power on from complete power off (IMHO - still has something to do with dtb)
- Cannot catch up with S905/S905X devices on Amazon/Netflix even on 720p (libhybris hacks fro MALI drivers)
So,
don't buy it for LE (still) unless you accept the above.
P.S. velqn
Tested today automatic subitles download - worked. Both Archive and RAR support addons were installed and enabled.
-
It was deliberately,
pleasant to find an old acquaintance here suddenly...
Apologies, though.
If NFS setup delivers up to the expectations,
it'll be a workaround, after all, but it has to be tested, then - consider wholistic solution migration to NFS(v4) and LE 9.0...
-
Пробва ли да конфигурираш (и) NFS на NAS-a, Веляне, вместо SAMBA?
-
If someone needs the NEW libwidevine ARM libraries, which work with Amazon VOD and Netflix:
Tested on 8.90.3 (S905X) with the additional explicit setting in Sandmann's Amazon VOD to store credentials instead of using cookie.
-
Heh...
WD vs. Micron/Crucial...
I would choose Lexar.
And read the whole thread, which was given to you above...
-
Quote
ultra-fast class 10 SD card
And all depends on the budget.
-
Just use symlinks on the SD card, pointing to folders on the eMMc.
In that way - an 8Gb TF card will be more than sufficient (to boot from it only).
And it's not mandatory to be ultra-fast class 10 and etc...
But your implementation will not be supported, and if you look for help - most probably this will be pointed firstly.
-
-
Clean install of LibreELEC-S905.arm-8.90.2.img.gz to internal and the box does not power on from its remote anymore...
Just great!
-
One is the distro embedded, which comes with the default installation,
the other (in userdata) is the custom one.
I do not know which one has more gravity, if you put contradicting settings in them,
but as far as it gets to LE - conveniently you can play with the second one (userdata), so put your parameters there, they'll be effective.
As per automount - just create an autostart.sh script in .config folder and put the mount NFS command there.
You might need to play with some delay (sleep 10, 15, 20 and etc) to make it work.
As per m2ts files,
I would suggest to demux such one (using tsMuxer, for example) to video and audio components,
re-mux them into a Matroska container file, and then - perform test iterations with both m2ts and mkv files, from local storage, USB attached HDD, network source and etc.
Good luck!
-
-
Are you sure this is a snippet from an Android CLI?
Guys,
why don't you just move some of the LE Kodi "storage low-latency demanding" folders from SD/TF to eMMc partition(s)?
Like temp, userdata(/addon_data), addons, for example... ?
-
Resolution should be confirmed, when the OP gives positive sign for it, IMHO.
-
