Experimental : LibreELEC-X8-X8H.arm-9.1-devel-20190310183315-782f78e.img
!!!!!!! use it on a spare SD !!!!!!!
- ethernet: set a manual Ip address is possible
- kodi doesn't freeze if a whitelist isn't define and if adjust refresh rate isn't activated.
builded from LE-test (based on LibreELEC-9.x)
Thank you Demetris. For supporting these boxes!
I have just updated from 8.2.3 to 9 using your LibreELEC-MXIII_Plus.arm-9.0-devel-20190207022938-5e27f15.
I had the same issue above, regarding system freeze when fast forwarding and stopping a video. But after changing to start/stop and whitelisting some resolutions that fixed it. (thank you datrh)
I cannot installtointernal via ssh.
LibreELEC:~ # installtointernal
sh: installtointernal: Permission denied
But all seems good, even running on a really old sd card lol
try : chmod +x installtointernal (to get the right permission on the file )and then type : installtointernal
did this work for anybody? how did you define a while list.
decided to go back to 8.2.3 for now.
file:settingssettingslevel-leia.png -> set to "expert mode"
https://kodi.wiki/view/settings/player => adjust display refresh rate -> start/stop
https://kodi.wiki/view/settings/system/display => define a whitelist eg : your tv runs at 1080p 60hz. In the whitelist put :1080p 60hz 1080p 24hz
like this your tv refresh rate will change to 24hz when is needed, limiting the judder.
I used this: LE9.0 remote configs ir-keytable Amlogic devices
remote.conf : Create remote.conf from scratch
if you're using a x8/x8-x check #1. this is the way to do it .
the ir-keytable is for the s905 as am-remote is not configured, not available in the std image
Went back to 18 and power off works again.
Btw can you start the minix using the remote only?
With the x8-h if i shutdown the minix, i need to remove the power plug and put it back again.
And i cannot start it from the remote.
ok i will put the files in the right place.
Tks for the feedback.
I answer myself. Turning off hardware acceleration was the key to start capture video in the correct way.
tks for the tip
Maybe is not the correct forum to ask this question, but happy to get it working in my old device
i'm not using hyperion but like you say , the most important is to get it working on your old device.
re-up 18.1 with more recent LE stuffs for those who have the network problem. let me know if the network switch is fixed.
had to mention that i use a x8-h..
I experienced the same on my X8-H Plus (did not test with my X8): The network interfaces are switched off after each restart of the box. I had to enable them in the LibreElec settings. Because of this, I reverted to the final version dated 020219.
Thank you for your support.
In the LE Menu - Wired Networks, I wouldnt know where in Kodi one could control Lan or Wan. Every boot or shutdown > LE program settings the Wired Networks switch is switched off when box is turned back on. So I can turn it ON, I get LAN and the next reboot it toggles it to OFF again. Once turned back on(box) I have to use the slider to turn Wired Networks back on.
btw. was my method of updating the proper way ? seems everything else started up without error's and after turning the Wired Networks switch back on all worked well.
well... i don't have this issue.
my setup :
- wifi network disabled
- wired network enabled
- dhcp enabled
- kodi has to wait that network is available before starting (30sec max)
i can reboot , shutdown/start. the wired network switch is still "on"
Hmm, I can't boot into LE. On booting have message "could not mount LABEL=STORAGE".
did you try another SD card?
how old is your firmware?
some peoples have successfully installed LE with a new SD card or a reflash of the box.
it's not 100% success proof but it may help.
Hello thx for a update its great but i have this same problem with "baalho" when i stop watching video kodi crash and ssuspended. I must restart device. Can you solve this problem?
I use mxiii plus img device
set kodi setting in "expert mode" , define a whitelist
ok thanks for the info.
i will take care of this.
It updated fine, but I noticed that Network switch = off, so turned it back on but after shutdown or reboot it toggles it back off!
sorry but what do you mean by "Network switch = off" ? A setting in Kodi ?