Posts by Tuuvian

I have what I believe to be a recent full backup as well as data files backups. Do I take then that there is no magic bullet sort of thing to repair the situation say by inserting the card on my windows pc and performing any procedures that will need to be done? Thanks.

I know 😕. It happen on the way out to work so was brief. Pi3 as to version it is the latest non-bete release. Think that will make it 8.3 but cannot get into the system to check. Thanks.

*** Error in mount_storage:mount_common. Could not mount /dev/data ***

### Starting debugging shell...type exit to quit ###

sh: can't access tty: job control turned off

What are my options if any to avoid full reinstall?

Thanks.

LE8.2 so Kodi, right?

Thanks will try :). The only bit that I was not entirely sure is whether the closing " on the filename should be as shown or just before .tar, that is not enclose the file extension as well.

I have now tested the backup I made using your June 10th instructions.

I tried restoring through the LE screen and it will go through the files up to 100%, then ask for reboot permission, it reboots but then it goes straight into Kodi without going through the restore and once in Kodi I could confirm that it was still the un-restored build.

Following your June 11th test instructions I was able to successfully restore.

I am not entirely sure why it works manually and not through the LE screen, but at least I have a confirmed process to make a valid backup. I do not foresee requiring full system backups and even less restores so I do not mind the extra steps.

I apologize before hand as I am not a Linux guy but if I wanted to save the backup on an USB drive called PATRIOT, will this change to line 4 do it:

4. tar -cvf /var/media/PATRIOT/backup.tar .kodi .cache .config

and for the restore

3. tar -xvf /var/media/PATRIOT/backup.tar

and if I wanted the filename to be the date/time:

4. tar -cvf /var/media/PATRIOT/"le$(date +%Y%m%d%H%M%S).tar" .kodi .cache .config

Would that be the correct syntax for all three scenarios?

Thanks.

Thanks will try it.

Yes you are right I was looking in the wrong spot.

How about a way to test the file? At times through the LE tab it has properly finished the backup but I have been unable to use that file to restore. Or should that not even possible and once the backup properly runs it course to the end there is no way that the resulting file should have any issues?

Thanks for the assistance and information.

That was very helpful.

I will have to run it more than once because that one went through without a hitch. However, I could not locate the tar file. I now have a temp folder under the temp folder but it is empty /storage/.kodi/temp/temp and I do not see a i do not see a new tar file under /storage/backup although I would not have expected to see one.

Was the code supposed to result on a tar file? If so, where it would be?

I am assuming that I can just change #3 to /storage/backup and if it works the new tar file should be there?

Once there is a tar is there a way to pre-check the file without having to go through the restore process?

Thanks.

On the pi3's have tried both internally to a card that has enough free space to store at least 5 times the resulting file size and to a USB drive that has enough free space to store at least 25 times the resulting file size.

On the Chromeboxes, but that was using OE, much more free space because of the HD and to a Qnap NAS which has 2tb free space.

Just freezes the box, even if left overnight comes back to the same stuck percentage, as the night before, and a frozen box. The resulting file when it does work (although as per above the restore may or may not work) is about 2.6gb.

Thanks.

Sorry not sure what docker is so almost certain I am not using it.

Varies, I can really deal with the failed / stuck backup because at least it is clear to me that it is not a good backup. The issue is with the ones that do complete because that gives me a false sense of security that I have a good backup should something happen.

If there was a way to check the resulting file before one needs it then that would great.

Thanks.

I have had this issue under various versions running on different pi3's. In the interest of full disclosure, i had similar issues under OE on several Chromeboxes.

Either the backup hangs requiring the power cord to be pulled or the backup finishes but the file refuses to restore.

Is there any easy solution for this? Is either any way to check the file after it has been completed to make sure that it will be able to be restored?

Alternatively, I guess that I could use one of the backup addons but I would prefer to use LE own.

Any suggestions will be greatly appreciated.

Thanks.