Posts by zorrua

zorrua · Color problem with S905X zorrua August 3, 2017 at 1:57 PM

Quote from mmpp

The latest libreelec versions use a new kernel, and the setting command changed - but as I and others have already reported, it currently does not work.

Thanks mmpp,

Where did you reported?

Kind regards.

zorrua · Color problem with S905X zorrua August 2, 2017 at 9:28 AM

Hello,

I update to 8.1.2 and I have same color issue.

The problem is that it does not exist the "output_rgb" file:

Code

# ls -l /sys/class/amhdmitx/amhdmitx0/ | pastebinit 
http://sprunge.us/AFPX

Best regards.

zorrua · Device tree for Mini M8S II zorrua August 2, 2017 at 7:15 AM

Thanks!

So I will use the same I installed.

Best regards.

zorrua · [8.2.3.1] LibreELEC 8.2 for S905/S905X zorrua August 2, 2017 at 7:13 AM

Hello,

I installed this image and it works great.

Will be more updates? I ask it because I don't see any version numbers.

Kind regards.

zorrua · Device tree for Mini M8S II zorrua July 31, 2017 at 8:48 PM

Hello,

The first time I installed Libreelec in the M8S device I installed "gxl_p212_2g.dtb" file.

I want to upgrade to 8.1.2 and I see there are more device tree files: Index of /s905/8.2/device_trees/S905X/

gxl_p212_2g.dtb

gxl_p212_2g_kvim.dtb

gxl_p212_2g_nand.dtb

Which one could I install?

Best regards.

zorrua · Don't suspend with latest alph zorrua July 30, 2017 at 9:29 AM

Quote from thinkbig16888

HI Zorrua

I found your post about the Xtreamer Ultra 2.

I also do have an old Ultra 2. Its still on Openelec 5.08.

I want to upgrade my Kodi 14.2 to the latest version.

Did you have your upgraded thru USB stick ? How was it ?

In case you can share info.

Thanks !

Display More

Hello,

Just use the official way of Libreelec, it works great.

Regards.

zorrua · Color problem with S905X zorrua June 12, 2017 at 7:58 PM

Quote from mmpp

the problem is with your TV set. See this thread for a solution:

s905 - hdmi handshake /color space problem with older TVs

Specifically s905 - hdmi handshake /color space problem with older TVs

Thanks! It works!

I add this lines in autostart.sh

Bash

#!/bin/sh
echo 1 > /sys/class/amhdmitx/amhdmitx0/output_rgb

Now there is pink or green colors.

Best regards.

zorrua · Color problem with S905X zorrua June 9, 2017 at 3:12 PM

Hello,

I have kszaq's 8.0.2a installed in a Nexbox A95X. The proble is that sometimes it change the TV color:

Then it comes well or just stop and play the play back came ok:

Could I add some logs? how could I get them?

Thanks for your help.

Kind regards.

zorrua · Hardware for 4K zorrua May 17, 2017 at 9:30 PM

Quote from Habibie

I have an MXQ Pro S905 comes with a built-in of H.265 decoder and claims to support 4K video streams. I don't have a 4K HDMI TV set to test this feature. As with the suspend, I think it is still under an experimental stage for LE 8.0.1k (latest as of this writing).

Hello,

I have 2 S905X and 1 S905 devices, they work great for 4K, but not for suspend.

Kind regards.

zorrua · Hardware for 4K zorrua May 15, 2017 at 3:45 PM

Hello,

I have a ECS Liva that run perfect in my room for 1080p. I change the TV and I want to play some 4K content.

Which device do you recommend?

It is important to get suspend mode and could wake up from USB (Liva does).

I really apprecite your help.

Kind regards.

zorrua · WeteK Play from OpenElec to Libre Elec zorrua April 27, 2017 at 3:04 PM

Quote from bicky

I have a WeteK Play OpenElec Box. This is currently running OpenElec Version 7.01 with Kodi 16.1. The CPU is ARMv7 Processor rev 0(v71).
My question is how can I upgrade and change this to the latest version of LibreElec which I believe is 8.0 running Kodi 17.1.
Any guidance welcome.

Download the LibreElec file, put it in the .update folder and reboot.

Regards.

zorrua · SNMPD zorrua April 3, 2017 at 9:27 PM

Hello,

I installed it, and I have CPU temp:

Code

# sensors 
coretemp-isa-0000
Adapter: ISA adapter
Core 0:       +60.0 C  (crit = +125.0 C)
Core 1:       +61.0 C  (crit = +125.0 C)

But it is not integrate with SNMPD, there is no temp info in the snmpwalk:

Code

# snmpwalk -v2c -c libreelec tacens1
iso.3.6.1.2.1.1.1.0 = STRING: "Linux tacens1 4.9.13 #1 SMP Wed Mar 22 17:35:19 GMT 2017 x86_64"
iso.3.6.1.2.1.1.2.0 = OID: iso.3.6.1.4.1.8072.3.2.10
iso.3.6.1.2.1.1.3.0 = Timeticks: (75813) 0:12:38.13
iso.3.6.1.2.1.1.4.0 = STRING: "root@localhost"
iso.3.6.1.2.1.1.5.0 = STRING: "tacens1"
iso.3.6.1.2.1.1.6.0 = STRING: "HOME"
iso.3.6.1.2.1.1.8.0 = Timeticks: (0) 0:00:00.00
iso.3.6.1.2.1.1.9.1.2.1 = OID: iso.3.6.1.6.3.1
iso.3.6.1.2.1.1.9.1.2.2 = OID: iso.3.6.1.6.3.16.2.2.1
iso.3.6.1.2.1.1.9.1.2.3 = OID: iso.3.6.1.6.3.11.3.1.1
iso.3.6.1.2.1.1.9.1.2.4 = OID: iso.3.6.1.6.3.15.2.1.1
iso.3.6.1.2.1.1.9.1.2.5 = OID: iso.3.6.1.6.3.10.3.1.1
iso.3.6.1.2.1.1.9.1.3.1 = STRING: "The MIB module for SNMPv2 entities"
iso.3.6.1.2.1.1.9.1.3.2 = STRING: "View-based Access Control Model for SNMP."
iso.3.6.1.2.1.1.9.1.3.3 = STRING: "The MIB for Message Processing and Dispatching."
iso.3.6.1.2.1.1.9.1.3.4 = STRING: "The management information definitions for the SNMP User-based Security Model."
iso.3.6.1.2.1.1.9.1.3.5 = STRING: "The SNMP Management Architecture MIB."
iso.3.6.1.2.1.1.9.1.4.1 = Timeticks: (0) 0:00:00.00
iso.3.6.1.2.1.1.9.1.4.2 = Timeticks: (0) 0:00:00.00
iso.3.6.1.2.1.1.9.1.4.3 = Timeticks: (0) 0:00:00.00
iso.3.6.1.2.1.1.9.1.4.4 = Timeticks: (0) 0:00:00.00
iso.3.6.1.2.1.1.9.1.4.5 = Timeticks: (0) 0:00:00.00
iso.3.6.1.2.1.11.1.0 = Counter32: 114
iso.3.6.1.2.1.11.2.0 = Counter32: 106
iso.3.6.1.2.1.11.3.0 = Counter32: 0
iso.3.6.1.2.1.11.4.0 = Counter32: 8
iso.3.6.1.2.1.11.5.0 = Counter32: 0
iso.3.6.1.2.1.11.6.0 = Counter32: 0
iso.3.6.1.2.1.11.8.0 = Counter32: 0
iso.3.6.1.2.1.11.9.0 = Counter32: 0
iso.3.6.1.2.1.11.10.0 = Counter32: 0
iso.3.6.1.2.1.11.11.0 = Counter32: 0
iso.3.6.1.2.1.11.12.0 = Counter32: 0
iso.3.6.1.2.1.11.13.0 = Counter32: 439
iso.3.6.1.2.1.11.14.0 = Counter32: 0
iso.3.6.1.2.1.11.15.0 = Counter32: 66
iso.3.6.1.2.1.11.16.0 = Counter32: 37
iso.3.6.1.2.1.11.17.0 = Counter32: 0
iso.3.6.1.2.1.11.18.0 = Counter32: 0
iso.3.6.1.2.1.11.19.0 = Counter32: 0
iso.3.6.1.2.1.11.20.0 = Counter32: 0
iso.3.6.1.2.1.11.21.0 = Counter32: 0
iso.3.6.1.2.1.11.22.0 = Counter32: 0
iso.3.6.1.2.1.11.24.0 = Counter32: 0
iso.3.6.1.2.1.11.25.0 = Counter32: 0
iso.3.6.1.2.1.11.26.0 = Counter32: 0
iso.3.6.1.2.1.11.27.0 = Counter32: 0
iso.3.6.1.2.1.11.28.0 = Counter32: 130
iso.3.6.1.2.1.11.29.0 = Counter32: 0
iso.3.6.1.2.1.11.30.0 = INTEGER: 2
iso.3.6.1.2.1.11.31.0 = Counter32: 0
iso.3.6.1.2.1.11.32.0 = Counter32: 0

Display More

I will investigate it.

Regards.

zorrua · SNMPD zorrua April 3, 2017 at 1:20 PM

Quote from lsellens

If you need lm_sensors for monitoring temp with snmp it's already part of the system-tools addon in the programs section of the libreelec repo.

Great!

I will try it.

Best regards.

zorrua · SNMPD zorrua April 1, 2017 at 5:43 PM

Hello, it works all versions!:

v1

v2c

v3 with user/pass

Here is a Cacti load graph:

Thanks for your work!

Kind regards.

zorrua · SNMPD zorrua March 31, 2017 at 10:13 PM

Quote from lsellens

Did you test v3 or authentication?

Hello,

No, I just add it to Cacti, tomorrow I will have some graphic from CPU and memory.

I will update the test.

Regards.

zorrua · SNMPD zorrua March 31, 2017 at 9:07 PM

Quote from lsellens

Did you get a chance to look at it? I took a look at the man pages for the config and v3 is configured very different then v1 and v2c. If you guys want a working addon then please supply me with the specifics for the config and do some testing. This addon is of zero use to me so if it's not useful to anyone else then I'm completely wasting my time.

Here is the most current version to be tested.
service.net-snmp-8.1.101~beta4.zip
It's limited to adding only 1 user which is rw and md5 des on v3
the actual config file I need feedback on is stored here
/storage/.kodi/userdata/addon_data/service.net-snmp/share/snmpd/snmpd.conf
I don't expect v3 authentication is currently working the way I wrote the gui configs. Need to know what needs to change in order to have a working config.
Thanks

Display More

Great!

I test it and it works:

Code

# snmpwalk -v2c -c libreelec tacens1
iso.3.6.1.2.1.1.1.0 = STRING: "Linux tacens1 4.9.13 #1 SMP Wed Mar 22 17:35:19 GMT 2017 x86_64"
iso.3.6.1.2.1.1.2.0 = OID: iso.3.6.1.4.1.8072.3.2.10
iso.3.6.1.2.1.1.3.0 = Timeticks: (52188) 0:08:41.88
iso.3.6.1.2.1.1.4.0 = STRING: "root@localhost"
iso.3.6.1.2.1.1.5.0 = STRING: "tacens1"
iso.3.6.1.2.1.1.6.0 = STRING: "HOME"
iso.3.6.1.2.1.1.8.0 = Timeticks: (0) 0:00:00.00
iso.3.6.1.2.1.1.9.1.2.1 = OID: iso.3.6.1.6.3.1
iso.3.6.1.2.1.1.9.1.2.2 = OID: iso.3.6.1.6.3.16.2.2.1
iso.3.6.1.2.1.1.9.1.2.3 = OID: iso.3.6.1.6.3.11.3.1.1
iso.3.6.1.2.1.1.9.1.2.4 = OID: iso.3.6.1.6.3.15.2.1.1
iso.3.6.1.2.1.1.9.1.2.5 = OID: iso.3.6.1.6.3.10.3.1.1
iso.3.6.1.2.1.1.9.1.3.1 = STRING: "The MIB module for SNMPv2 entities"
iso.3.6.1.2.1.1.9.1.3.2 = STRING: "View-based Access Control Model for SNMP."
iso.3.6.1.2.1.1.9.1.3.3 = STRING: "The MIB for Message Processing and Dispatching."
iso.3.6.1.2.1.1.9.1.3.4 = STRING: "The management information definitions for the SNMP User-based Security Model."
iso.3.6.1.2.1.1.9.1.3.5 = STRING: "The SNMP Management Architecture MIB."
iso.3.6.1.2.1.1.9.1.4.1 = Timeticks: (0) 0:00:00.00
iso.3.6.1.2.1.1.9.1.4.2 = Timeticks: (0) 0:00:00.00
iso.3.6.1.2.1.1.9.1.4.3 = Timeticks: (0) 0:00:00.00
iso.3.6.1.2.1.1.9.1.4.4 = Timeticks: (0) 0:00:00.00
iso.3.6.1.2.1.1.9.1.4.5 = Timeticks: (0) 0:00:00.00
iso.3.6.1.2.1.11.1.0 = Counter32: 157
iso.3.6.1.2.1.11.2.0 = Counter32: 153
iso.3.6.1.2.1.11.3.0 = Counter32: 0
iso.3.6.1.2.1.11.4.0 = Counter32: 4
iso.3.6.1.2.1.11.5.0 = Counter32: 0
iso.3.6.1.2.1.11.6.0 = Counter32: 0
iso.3.6.1.2.1.11.8.0 = Counter32: 0
iso.3.6.1.2.1.11.9.0 = Counter32: 0
iso.3.6.1.2.1.11.10.0 = Counter32: 0
iso.3.6.1.2.1.11.11.0 = Counter32: 0
iso.3.6.1.2.1.11.12.0 = Counter32: 0
iso.3.6.1.2.1.11.13.0 = Counter32: 429
iso.3.6.1.2.1.11.14.0 = Counter32: 0
iso.3.6.1.2.1.11.15.0 = Counter32: 63
iso.3.6.1.2.1.11.16.0 = Counter32: 90
iso.3.6.1.2.1.11.17.0 = Counter32: 0
iso.3.6.1.2.1.11.18.0 = Counter32: 0
iso.3.6.1.2.1.11.19.0 = Counter32: 0
iso.3.6.1.2.1.11.20.0 = Counter32: 0
iso.3.6.1.2.1.11.21.0 = Counter32: 0
iso.3.6.1.2.1.11.22.0 = Counter32: 0
iso.3.6.1.2.1.11.24.0 = Counter32: 0
iso.3.6.1.2.1.11.25.0 = Counter32: 0
iso.3.6.1.2.1.11.26.0 = Counter32: 0
iso.3.6.1.2.1.11.27.0 = Counter32: 0
iso.3.6.1.2.1.11.28.0 = Counter32: 177
iso.3.6.1.2.1.11.29.0 = Counter32: 0
iso.3.6.1.2.1.11.30.0 = INTEGER: 2
iso.3.6.1.2.1.11.31.0 = Counter32: 0
iso.3.6.1.2.1.11.32.0 = Counter32: 0

Display More

Could you build the addon to other architectures? Amlogic?

Best regards.

zorrua · SNMPD zorrua March 29, 2017 at 7:51 AM

Quote from lsellens

This is the current config as supplied by the original addon.
snmpd.conf

The syslocation and syscontact is obviously the config option you want modifiable when you said location and contact. Could you be more specific what needs to be changed when you say community? Also how are the snmp version options supplied?
I'm writing a script to modify these options from the addons settings, so in other words it will not be command line editing.
if you want to test what I've done so far
service.net-snmp-8.1.101~beta1.zip
this will only run on a generic x86_64 build
the community option currently does nothing

Display More

Great!

In the configuration the community is set to "libreelec", it is well this way. And the SNMP verdion is set to version 2c.

It will be OK to add settings for location and contact.

I will try your build later.

Regards.

zorrua · TVHeadend 4.2 Add-On zorrua March 29, 2017 at 7:14 AM

Quote from mudrunner88

Configuration Bug.

Not sure if I should report it here if this Dev team made the addon...Or if it should go to TVH if they made the Addon.

Which bug?

I have this addon and works well for me.

Regards.