Posts by cgsorin

Quote from bubblegum57

thread-5274.html

choose the krypton or jarvis build

then using the libreelec sd builder you have created your image??? (I use Rufus)

then choose your device tree depending on the RAM I think S905X uses gxl, but I am not sure

Delete the img.dtb on the sd/usb & copy the downloaded device tree to the sd/usb renaming it to dtb.img

Then with the power to the box off, connect the sd card, hold the reset button in, while connecting the power. wait a few seconds, it should then show the libreelec boot screen.

If that doesn't work, change the device tree for a different one.

Display More

I've tried different builds of LibreELEC with different trees and the same result: not working.
The blue led of the box is off and the TV screen is black.
I'm afraid that my box is totally bricked.

Quote from bubblegum57

So, it seems this box has a S905X so from here

thread-5274.html

choose the krypton or jarvis build

then using the libreelec sd builder you have created your image??? (I use Rufus)

then choose your device tree depending on the RAM I think S905X uses gxl, but I am not sure

Delete the img.dtb on the sd/usb & copy the downloaded device tree to the sd/usb renaming it to dtb.img

Then with the power to the box off, connect the sd card, hold the reset button in, while connecting the power. wait a few seconds, it should then show the libreelec boot screen.

If that doesn't work, change the device tree for a different one.

Display More

Thank you very much for your response.
I will try and come back with the results.

I've also tried with LibreELEC-S905X.aarch64-7.0.2.006.2.img.gz and other versions but to no avail.

Hello,
I have a big problem.
I've tried to make the update from an SD card with Amlogic Burn Card Maker but the upgrading screen is always stucked at 5% of the progress bar.
Everything I've tried is not working, I can't manage to install rv 112, 111, 110 or put back the 109 version.
I've also tried with Amlogic USB Burning Tool but to no avail.
I get the following errors:
- [0x30201006]UBOOT/Disk initialize/Send command/Time out
- [0x00101004]Erase bootloader/Lowper/Identify/Error result
- [0x10101002]Romcode/Initialize DDR/Identify/USB Control setup error
There are few questions to ask:
- Do I need the stock firmware that came with my Mini M8SII box?
- Where can I find it?
- Is my Mini box bricked?

Here is a picture with the box inside: