Posts by kkk125

kkk125

Quote from crazycat

show kernel log after reboot (dmesg)

Quote

[ 0.011164] ACPI: SSDT 0x000000005DA63260 000C8F (v02 INTEL UsbCTabl 00000003 BRXT 0100000D)

[ 0.415801] ACPI: bus type USB registered

[ 0.415801] usbcore: registered new interface driver usbfs

[ 0.415801] usbcore: registered new interface driver hub

[ 0.415801] usbcore: registered new device driver usb

[ 1.608437] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[ 1.608473] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

[ 1.608504] uhci_hcd: USB Universal Host Controller Interface driver

[ 1.608889] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1

[ 1.610326] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03

[ 1.610329] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 1.610331] usb usb1: Product: xHCI Host Controller

[ 1.610334] usb usb1: Manufacturer: Linux 5.3.0-53-generic xhci-hcd

[ 1.610336] usb usb1: SerialNumber: 0000:00:15.0

[ 1.610550] hub 1-0:1.0: USB hub found

[ 1.613812] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2

[ 1.613817] xhci_hcd 0000:00:15.0: Host supports USB 3.0 SuperSpeed

[ 1.613886] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03

[ 1.613888] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 1.613891] usb usb2: Product: xHCI Host Controller

[ 1.613892] usb usb2: Manufacturer: Linux 5.3.0-53-generic xhci-hcd

[ 1.613894] usb usb2: SerialNumber: 0000:00:15.0

[ 1.614081] hub 2-0:1.0: USB hub found

[ 1.951421] usb 1-1: new high-speed USB device number 2 using xhci_hcd

[ 1.980216] usb 1-1: New USB device found, idVendor=2109, idProduct=2811, bcdDevice=90.70

[ 1.980219] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[ 1.980221] usb 1-1: Product: USB2.0 Hub

[ 1.980223] usb 1-1: Manufacturer: VIA Labs, Inc.

[ 1.981484] hub 1-1:1.0: USB hub found

[ 2.119655] usb 1-4: new high-speed USB device number 3 using xhci_hcd

[ 2.141246] usb 1-4: New USB device found, idVendor=0b48, idProduct=3011, bcdDevice= 0.00

[ 2.141249] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3

[ 2.141251] usb 1-4: Product: dvb-s2

[ 2.141252] usb 1-4: Manufacturer: geniatech

[ 2.141254] usb 1-4: SerialNumber: 000000000232

[ 2.287667] usb 1-1.2: new full-speed USB device number 4 using xhci_hcd

[ 2.405499] usb 1-1.2: New USB device found, idVendor=0c45, idProduct=5101, bcdDevice= 1.20

[ 2.405503] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[ 2.405506] usb 1-1.2: Product: RF Controller

[ 2.405508] usb 1-1.2: Manufacturer: MemsArt MA144

[ 2.428895] usbcore: registered new interface driver usbhid

[ 2.428896] usbhid: USB HID core driver

[ 2.432386] input: MemsArt MA144 RF Controller as /devices/pci0000:00/0000:00:15.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:0C45:5101.0001/input/input2

[ 2.492109] hid-generic 0003:0C45:5101.0001: input,hidraw0: USB HID v1.10 Keyboard [MemsArt MA144 RF Controller] on usb-0000:00:15.0-1.2/input0

[ 2.492293] input: MemsArt MA144 RF Controller as /devices/pci0000:00/0000:00:15.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:0C45:5101.0002/input/input3

[ 2.492550] hid-generic 0003:0C45:5101.0002: input,hidraw1: USB HID v1.10 Mouse [MemsArt MA144 RF Controller] on usb-0000:00:15.0-1.2/input1

[ 2.492848] input: MemsArt MA144 RF Controller Consumer Control as /devices/pci0000:00/0000:00:15.0/usb1/1-1/1-1.2/1-1.2:1.2/0003:0C45:5101.0003/input/input4

[ 2.507691] usb 1-1.3: new full-speed USB device number 5 using xhci_hcd

[ 2.552061] input: MemsArt MA144 RF Controller System Control as /devices/pci0000:00/0000:00:15.0/usb1/1-1/1-1.2/1-1.2:1.2/0003:0C45:5101.0003/input/input5

[ 2.552235] hid-generic 0003:0C45:5101.0003: input,hidraw2: USB HID v1.10 Device [MemsArt MA144 RF Controller] on usb-0000:00:15.0-1.2/input2

[ 2.552534] hid-generic 0003:0C45:5101.0004: hiddev0,hidraw3: USB HID v1.10 Device [MemsArt MA144 RF Controller] on usb-0000:00:15.0-1.2/input3

[ 2.624502] usb 1-1.3: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.10

[ 2.624505] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[ 2.624507] usb 1-1.3: Product: USB Receiver

[ 2.624508] usb 1-1.3: Manufacturer: Logitech

[ 2.634716] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:15.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:046D:C52B.0005/input/input6

[ 2.691603] hid-generic 0003:046D:C52B.0005: input,hidraw4: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:15.0-1.3/input0

[ 2.695522] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:15.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:046D:C52B.0006/input/input7

[ 2.695691] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:15.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:046D:C52B.0006/input/input8

[ 2.755513] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:15.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:046D:C52B.0006/input/input9

[ 2.755696] hid-generic 0003:046D:C52B.0006: input,hiddev1,hidraw5: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:15.0-1.3/input1

[ 2.759303] hid-generic 0003:046D:C52B.0007: hiddev2,hidraw6: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:15.0-1.3/input2

[ 2.851413] usb 1-1.4: new full-speed USB device number 6 using xhci_hcd

[ 2.976067] usb 1-1.4: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.01

[ 2.976069] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[ 2.976071] usb 1-1.4: Product: USB Receiver

[ 2.976073] usb 1-1.4: Manufacturer: Logitech

[ 2.982687] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:15.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:046D:C534.0008/input/input11

[ 3.039560] hid-generic 0003:046D:C534.0008: input,hidraw7: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:15.0-1.4/input0

[ 3.043229] input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:15.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C534.0009/input/input12

[ 3.043369] input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:15.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C534.0009/input/input13

[ 3.099706] input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:15.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C534.0009/input/input14

[ 3.099827] hid-generic 0003:046D:C534.0009: input,hiddev3,hidraw8: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:15.0-1.4/input1

[ 3.425577] logitech-djreceiver 0003:046D:C52B.0007: hiddev1,hidraw4: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:15.0-1.3/input2

[ 3.453223] ucsi_acpi USBC000:00: Failed to reset PPM! Trying again..

[ 3.484355] ucsi_acpi USBC000:00: Failed to reset PPM! Trying again..

[ 3.511728] ucsi_acpi USBC000:00: Failed to reset PPM! Trying again..

[ 3.539762] ucsi_acpi USBC000:00: Failed to reset PPM! Trying again..

[ 3.546094] input: Logitech Unifying Device. Wireless PID:404d Keyboard as /devices/pci0000:00/0000:00:15.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0007/0003:046D:404D.000A/input/input17

[ 3.567787] ucsi_acpi USBC000:00: Failed to reset PPM! Trying again..

[ 3.595779] ucsi_acpi USBC000:00: Failed to reset PPM! Trying again..

[ 3.603645] input: Logitech Unifying Device. Wireless PID:404d Mouse as /devices/pci0000:00/0000:00:15.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0007/0003:046D:404D.000A/input/input18

[ 3.603766] input: Logitech Unifying Device. Wireless PID:404d Consumer Control as /devices/pci0000:00/0000:00:15.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0007/0003:046D:404D.000A/input/input19

[ 3.603834] input: Logitech Unifying Device. Wireless PID:404d System Control as /devices/pci0000:00/0000:00:15.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0007/0003:046D:404D.000A/input/input20

[ 3.603885] logitech-djreceiver 0003:046D:C534.0008: hidraw5: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:15.0-1.4/input0

[ 3.603930] hid-generic 0003:046D:404D.000A: input,hidraw6: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:404d] on usb-0000:00:15.0-1.3/input2:1

[ 3.623785] ucsi_acpi USBC000:00: Failed to reset PPM! Trying again..

[ 3.655723] ucsi_acpi USBC000:00: Failed to reset PPM! Trying again..

[ 3.683801] ucsi_acpi USBC000:00: Failed to reset PPM! Trying again..

[ 3.713214] ucsi_acpi USBC000:00: Failed to reset PPM! Trying again..

[ 3.800071] logitech-djreceiver 0003:046D:C534.0009: hiddev2,hidraw7: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:15.0-1.4/input1

[ 3.864832] input: Logitech Wireless Mouse PID:4054 Mouse as /devices/pci0000:00/0000:00:15.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C534.0009/0003:046D:4054.000B/input/input25

[ 3.865635] hid-generic 0003:046D:4054.000B: input,hidraw8: USB HID v1.11 Mouse [Logitech Wireless Mouse PID:4054] on usb-0000:00:15.0-1.4/input1:2

[ 4.237314] dvb-usb: found a 'TechnoTrend TT-connect S2-4600' in warm state.

[ 4.238695] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.

[ 4.239004] usb 1-4: media controller created

[ 4.243490] dvb-usb: MAC address: 00:18:bd:5b:db:92

[ 4.489726] input: Logitech K400 Plus as /devices/pci0000:00/0000:00:15.0/usb1/1-1/1-1.3/1-1.3:1.2/0003:046D:C52B.0007/0003:046D:404D.000A/input/input36

[ 4.489970] logitech-hidpp-device 0003:046D:404D.000A: input,hidraw6: USB HID v1.11 Keyboard [Logitech K400 Plus] on usb-0000:00:15.0-1.3/input2:1

[ 4.533652] input: Logitech Wireless Mouse as /devices/pci0000:00/0000:00:15.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:046D:C534.0009/0003:046D:4054.000B/input/input37

[ 4.533920] logitech-hidpp-device 0003:046D:4054.000B: input,hidraw8: USB HID v1.11 Mouse [Logitech Wireless Mouse] on usb-0000:00:15.0-1.4/input1:2

[ 4.651043] usb 1-4: DVB: registering adapter 0 frontend 0 (Montage Technology M88DS3103B)...

[ 4.687501] rc rc0: TechnoTrend TT-connect S2-4600 as /devices/pci0000:00/0000:00:15.0/usb1/1-4/rc/rc0

[ 4.687643] input: TechnoTrend TT-connect S2-4600 as /devices/pci0000:00/0000:00:15.0/usb1/1-4/rc/rc0/input38

[ 4.689462] dvb-usb: schedule remote query interval to 250 msecs.

[ 4.689467] dvb-usb: TechnoTrend TT-connect S2-4600 successfully initialized and connected.

[ 4.689530] usbcore: registered new interface driver dw2102

[ 6.392536] usb 1-4: DVB: adapter 0 frontend 0 frequency 0 out of range (950000..2150000)

[ 8.467449] ucsi_acpi USBC000:00: failed to reset PPM!

[ 8.467455] ucsi_acpi USBC000:00: PPM init failed (-110)

Display More

kkk125

Quote from crazycat

remove old media modules before install (see install.sh script)

Hi crazycat

I have an S4600 V2 (2018+) and I have successfully compiled your drivers (Ubuntu 18.04) but when I reboot the drivers stop working. I try to remove the drivers and install again, they work, but again when I do another reboot they stop working again. Any idea what's wrong? Thank you

kkk125 · Channel list on tvheadend 4.2 kkk125 June 15, 2016 at 1:02 PM

Quote from kavehebadi

you mean service maping?
see here Configure Tvheadend - Tvheadend 4.0

Thanks for the help

kkk125 · Channel list on tvheadend 4.2 kkk125 June 13, 2016 at 12:47 PM

how to send a list of channels in tvheadend 4.2, I tried just as command with tvheaend 4.0 but nothing appears . Any solution ? thank you

kkk125 · Channel list on tvheadend 4.2 kkk125 June 13, 2016 at 12:44 PM

how to send a list of channels in tvheadend 4.2, I tried just as command with tvheaend 4.0 but nothing appears . Any solution ? thank you

Posts by kkk125

Geniatech Mygica HDStar DVB-S2 USB HD not working

Geniatech Mygica HDStar DVB-S2 USB HD not working

Channel list on tvheadend 4.2

Channel list on tvheadend 4.2

Channel list on tvheadend 4.2