Posts by kkk125

    If you have a USB => eMMC module reader/writer board, connect the module and write the "odroid-n2.img.gz" directly to eMMC, then put the SPI switch to the right (so petitboot is not used) and power on the board. If you don't have the USB/eMMC converter, you will need to boot the N2 from an SD card first, then SSH into the console and download the image to the SD card, and use "emmctool" to write the LE image to the module (overwriting anything on eMMC).

    i tried to do what you explained to me USB => eMMC module reader/writer, but without success, but with your image from april 2021 it works perfectly

    best regards

    https://wiki.libreelec.tv/support/log-files

    Please share a pastekodi and the out of the following commands

    Code
    lspci 
    lsusb
    dmesg | pastebinit 

    LibreELEC:~ # lspci

    00:00.0 Host bridge: Intel Corporation Gemini Lake Host Bridge (rev 03)

    00:02.0 VGA compatible controller: Intel Corporation UHD Graphics 605 (rev 0

    3)

    00:0e.0 Audio device: Intel Corporation Celeron/Pentium Silver Processor Hig

    h Definition Audio (rev 03)

    00:0f.0 Communication controller: Intel Corporation Celeron/Pentium Silver P

    rocessor Trusted Execution Engine Interface (rev 03)

    00:12.0 SATA controller: Intel Corporation Device 31e3 (rev 03)

    00:13.0 PCI bridge: Intel Corporation Gemini Lake PCI Express Root Port (rev

    f3)

    00:14.0 PCI bridge: Intel Corporation Gemini Lake PCI Express Root Port (rev

    f3)

    00:14.1 PCI bridge: Intel Corporation Gemini Lake PCI Express Root Port (rev

    f3)

    00:15.0 USB controller: Intel Corporation Device 31a8 (rev 03)

    00:17.0 Signal processing controller: Intel Corporation Device 31b4 (rev 03)

    00:17.1 Signal processing controller: Intel Corporation Device 31b6 (rev 03)

    00:17.2 Signal processing controller: Intel Corporation Device 31b8 (rev 03)

    00:17.3 Signal processing controller: Intel Corporation Device 31ba (rev 03)

    00:1c.0 SD Host controller: Intel Corporation Celeron/Pentium Silver Process

    or SDA Standard Compliant SD Host Controller (rev 03)

    00:1f.0 ISA bridge: Intel Corporation Device 31e8 (rev 03)

    00:1f.1 SMBus: Intel Corporation Celeron/Pentium Silver Processor Gaussian M

    ixture Model (rev 03)

    02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8125 2.5GbE

    Controller (rev 04)

    03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8125 2.5GbE

    Controller (rev 04)

    LibreELEC:~ # lsusb

    Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub

    Bus 001 Device 002: ID 734c:5521 TBS Technologies China

    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

    http://ix.io/3lje

    Best Regards

    Code
    ok thank you very much for your reply. because I also have an rpi4, but with a TBS 5520. Regards
    Code
    One question, WinTV-quadHD, is PCI, how are you connecting to the Raspberry? do you have any adapter? I have been looking for these usb-pci adapters but I can't find them. Thanks




    Okay resolved. Thank you very much


    Okay resolved. Thank you very much

    Code
    Good afternoon, I have installed libreelec version 9.95.1, on Raspberry4 and installed tvheadend from libreelec repository but it does not work, I try to access it through a browser and says page not available. so does Oscam. wanted help. Thanks