Posts by Bubba2017

Quote from Bubba2017

I like the emulators version.

I did a clean install of the latest version 2017-04-01 and now find that I am unable to access the LibreELEC storage using windows as I did before.
I did see that FTP was added and this has given me access using the root login.

How to enable access directly from windows file explorer again?

Samba is enabled (no password)
Auto-share external drives enabled.

Turned Samba & Auto-share external drives to off then back on and now am able to access using windows 10 file explorer.

I like the emulators version.

I did a clean install of the latest version 2017-04-01 and now find that I am unable to access the LibreELEC storage using windows as I did before.
I did see that FTP was added and this has given me access using the root login.

How to enable access directly from windows file explorer again?

Yes I second that.

Thanks for working on LibreELEC.

I am currently using the LE 8.0.1

Wii remotes don't seem to want to pair. They will work with Trust and Connect, but will not automatically do so.

Every time I restart the system or change the batteries I need to go into the LibreELEC app and select Trust and Connect.

Is there anyway to have LibreELEC automatically connect to the Wii remotes when they are detected?

Figured out how to get audio out of HDMI1

renamed file --> asound.conf.sample
to
asound.conf

Edited it to DEV=0

Is there any way that EM and Retoarch could assume the settings from Kodi? (so noobs as myself don't have to figure out linux, coding etc. I like my hair)

Audio is working in Kodi out of my tv on the HDMI, but when in emulationstation searching for a game the click sounds come out of the laptop speaker instead.
When I select a game.

How do I change this to have the audo come out the HDMI (TV)?
Note: using the latest Mar 24th build.

LibreELEC:~ # aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC283 Analog [ALC283 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0

Had the same problem which was solved here --> thread-6396.html

However, when using the version with emulators installed (LE8 "Extended" community build (Generic )), I don't know how to get the audio to HDMI1 in Retroplayer.

Thanks for help

Here is what I have.
Did xrandr and aplay for when I am in Kodi and the audio and video are working.

How to get audio and Video to both work on HDMI1.
I can get the video not the audio.

Retroarch Super Nintendo - Audio not working, Video working HDMI1, eDP1 display on
LibreELEC:~ # xrandr
Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767
eDP1 connected primary (normal left inverted right x axis y axis)
1366x768 60.01 +
1360x768 59.96
1280x720 60.00
1024x768 60.00
1024x576 60.00
960x540 60.00
800x600 60.32 56.25
864x486 60.00
640x480 59.94
720x405 60.00
680x384 60.00
640x360 60.00
DP1 disconnected (normal left inverted right x axis y axis)
HDMI1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 1230mm x 700mm
1920x1080 60.00* 59.94 30.00 24.00 29.97 23.98
1920x1080i 60.00 59.94
1280x720 60.00 59.94
1024x768 75.03 70.07 60.00
800x600 72.19 75.00 60.32
720x480 60.00 59.94
720x480i 60.00 59.94
640x480 75.00 60.00 59.94
720x400 70.08
VGA1 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
LibreELEC:~ # aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC283 Analog [ALC283 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0

True, will rename afterwords.

This solved the video problem. Thanks.
This is my first time SSH. Have been using terminal through tigervnc.

After doing this, I was able to get the emulators to play games on the HDMI1, but for some reason it turns on the laptop LCD screen and leaves it on. Weird.

Quote from vitorp07

Is your goal to have the laptop's screen always disabled in LibreELEC and having the output set to the HDMI1?

SSH to your laptop and post the output of the following command here.

Code

xrandr

Goal is to have HDMI1 treated as the primary display by disabling the internal laptop screen.
2nd and related problem is that I am using a 4K monitor which if the internal laptop screen is active sets the HDMI1 screen to 4k but displays the maximum 1366x768 res of the Laptop so not full screen.

If I boot the computer with the case closed I can have the display take full screen on HDMI1 upto the max of 1080p

I ran the xrandr command with the laptop screen closed.

LibreELEC:~ # xrandr
Screen 0: minimum 8 x 8, current 1366 x 768, maximum 32767 x 32767
eDP1 connected primary 1366x768+0+0 (normal left inverted right x axis y axis) 3 50mm x 190mm
1366x768 60.01*+
1360x768 59.96
1280x720 60.00
1024x768 60.00
1024x576 60.00
960x540 60.00
800x600 60.32 56.25
864x486 60.00
640x480 59.94
720x405 60.00
680x384 60.00
640x360 60.00
DP1 disconnected (normal left inverted right x axis y axis)
HDMI1 connected 1280x720+0+0 (normal left inverted right x axis y axis) 1230mm x 700mm
1920x1080 60.00 59.94 30.00 24.00 29.97 23.98
1920x1080i 60.00 59.94
1280x720 60.00* 59.94
1024x768 75.03 70.07 60.00
800x600 72.19 75.00 60.32
720x480 60.00 59.94
720x480i 60.00 59.94
640x480 75.00 60.00 59.94
720x400 70.08
VGA1 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
LibreELEC:~ #

Quote from Klojum

Via System / System Settings / Display, you can select your default output display, and also the option to 'Blank other displays'.

Yes I currently can blank the display this way, however I need it to force to the second monitor at a higher resolutions than the internal LCD before Kodi starts.

The internal LCD mucks things up. When the laptop lid is open to access the keyboard etc.

I am using an Acer Aspire E15 with a damaged LCD display. I have a 4K Vizio E-series monitor as my main display.
I can get the video to display on both monitors or can blank out LCD by using fn keys or closing the lid.

Internal LCD is lower resolution than the Vizio.

The Vizio has to be tricked to display full screen by closing the lid on the laptop and adjusting the res to 720p.
Then using the web Chorus2 send a reboot (since the screen blanks when changing the output to HDMI1).
After reboot, the Vizio displays full screen.
If I set the display to 1080p it works.
Openning the laptop lid so the LCD is on, I have to start all over again.

Is it possible to force output to HDMI1 with a specific resolution that is different from eDP1 (the LCD)?

Additionally playing EMU's only displayed on LCD... How to force to HDMI1 Vizio?

At the momment Libreelec creates backups using the date/time format. I would like to be able to add a user entered comment or name etc.

i.e.
Currently -> 20170315134221.tar
Would Like -> Before Update to 9.0_20170315134221.tar