Q Can't get Beelink remote keys to work!

I am not able to get some of the keys to work on my Beelink S82 (aka Tronsmart S95) remote (using an MXQ S805 box). They are: Power, Home, Volume, Mouse, Menu. When I try reading codes for these buttons with the "dmesg -c" command in terminal, nothing happens. None of those keys gets returned. Not even the keys on the Beelink remote that do work under LE. Only the keys the MXQ's stock Visson remote get return codes in terminal. Is there a trick to this I am missing?

Quote from kostaman

What chip is in this box of yours ?? Confusing in your post MXQ S805.
What LE Version are you using ??
Are you running LE Via SD Card boot with Android still internally.??

I mention the chip, its an Amlogic S805. So I'm using the latest build of LE for this chip, v.8.0.1a, via SD card boot with Android internally. The box brand is MXQ (OTT).

Well, I should be on the latest version of Kodi for the S805 chip; 8.0.1a. But before this version, I had installed the 8.0g and 8.0b versions; and they had the same result: which is while the Beelink/Tronsmart remote does work with these editions of LE, half the buttons don't. However, under Android on the MXQ box, all buttons on this remote does work. So I copied the Android remote.conf file, and I am posting it here (see below). I am hoping I can just add codes from this file to the LE default config file. But I don't know which codes in the remote.conf file correspond to which keys on the remote.

In fact, I don't even know where LE is storing its default remote configuration. I do not see a remote.conf file in the .configfiles directory, or any of its subdirectories. Moreover, it seems that whenever I try to install my own remote.conf file in the .configfiles directory, no matter what remote.conf file it is, both remotes stop working in LE! So I have to figure out what's happening there, before I can even think about changing the default remote configuration.

Picture of your remote please.

My remote is the Beelink S82/Tronsmart S95. It looks similar to this.

Dont insert link to sellers.

I don't see where I did that?

DEFAULT REMOTE.CONF CONFIG FILE FROM ANDROID (WHICH PROPERLY OPERATES BOTH BEELINK & VISSON REMOTES):

(n.b. This remote.conf file is found in the system/etc folder of the Android system on the OTT MXQ S805 Kodi box. It is meant to control the Visson S82 remote. But with the USB dongle for the Beelink remote installed, the box works perfectly controlling all of the buttons on this secondary remote, alongside the default remote).

#*********************************************************************************************************
#this file is configuration for each factory remote device
# work_mode 0 :software mode 1 :hardware mode
# repeat_enable 0 :disable repeat 1 :enable repeat
#
# factory_code each device has it's unique factory code.
# pattern:custom_code(16bit)+index_code(16bit)
# examble: 0xff000001 = 0xff00(custom cod) 0001 (index)
#
# release_delay unit:ms.release will report from kernel to user layer after this period of time
# from press or repeat triggered.
#
# debug_enable 0 :debug disable 1 :debug disable
#
# SW MODE:
# bit_count how many bits in each frame
# tw_leader_act time window for leader active
# tw_bit0 time window for bit0 time.
# tw_bit1 time window for bit1 time
# tw_repeat_leader time window for repeat leader
# REG
# reg_base_gen set value for PREG_IR_DEC_BASE_GEN
# reg_control set value for PREG_IR_DEC_CONTROL
# reg_leader_act set value for PREG_IR_DEC_LEADER_ACTIVE
# reg_leader_idle set value for PREG_IR_DEC_LEADER_IDLE
# reg_repeat_leader set value for PREG_IR_DEC_REPEAT_IDLE
# reg_bit0_time set value for PREG_IR_DEC_BIT0_TIME
#*************************************************************************************************************
#amlogic NEC remote
factory_code = 0xfe010001
work_mode = 0
repeat_enable = 1
repeat_delay = 40
repeat_peroid = 39
release_delay = 121
debug_enable = 1

fn_key_scancode = 0x00
left_key_scancode = 0x51
right_key_scancode = 0x50
up_key_scancode = 0x16
down_key_scancode = 0x1a
ok_key_scancode = 0x13
pageup_key_scancode = 0x55
pagedown_key_scancode = 0x54

mouse_begin
0 0x51
1 0x50
2 0x16
3 0x1a
mouse_end

key_begin
0x01 11
0x4e 2
0x0d 3
0x0c 4
0x4a 5
0x09 6
0x08 7
0x46 8
0x05 9
0x04 10
0x13 97
0x19 15
0x42 14
0x16 103
0x1a 108
0x51 105
0x50 106
0x11 102
0x18 104
0x10 109
0x4c 125
0x5a 119
0x59 122
0x52 128
0x58 123
0x54 120
0x55 121
0x40 116
0x41 113
0x45 130
0x49 134
0x0a 133
0x48 138
0x4d 70
0x0e 136
0x0f 138
0x43 132
0x03 127
0x06 139
0x44 140
0x00 63
0x02 395
key_end
repeat_key_begin
0x01 11
0x4e 2
0x0d 3
0x0c 4
0x4a 5
0x09 6
0x08 7
0x46 8
0x05 9
0x04 10
0x13 97
0x19 15
0x42 14
0x16 103
0x1a 108
0x51 105
0x50 106
0x11 102
0x18 104
0x10 109
0x4c 125
0x5a 119
0x59 122
0x52 128
0x58 123
0x54 120
0x55 121
0x40 116
0x41 113
0x45 130
0x49 134
0x0a 133
0x48 138
0x4d 70
0x0e 136
0x0f 138
0x43 132
0x03 127
0x06 139
0x44 140
0x00 63
0x02 395
repeat_key_end
[/quote]