Hi all.\nI've a NEXBOX MXQ PRO that I brought last year but I haven't used until now. My box has a sticker "MXQ-S905 1G\/8G" \/ "RTL8189 20160315" on the PCB.\n \nThese cheap boards have a well-known bug in uboot that prevents to power on the box from remote.\n\nI've installed latest nexbox official firmware "cyx_MXQPro-NEXBOX_8189etv_8g1g_kodi_addons_160603_USB.rar" from Download latest Android Kitkat 4.4.2 stock firmware for Nexbox MXQ Pro TV Box - China Gadgets Reviews [URL:http:\/\/chinagadgetsreviews.com\/firmware-nexbox-mxq-pro.html]\n\nWith this firmware I managed to install libreelec on the NAND storage but the annoying power-on bug persists. This is a bad quality firmware not only for power-on bug, you can't go to recovery using the toothpick method.\n\nI've found another firmware for "mxq pro 4k" (it adds 4K to the name) dated 02-12-2016 from here:\nFIRMWARE: TV-Box MXQ PRO 4K con SoC S905 (02-12-2016) | AndroidPC.es [URL:http:\/\/androidpc.es\/blog\/2016\/12\/17\/firmware-tv-box-mxq-plus-4k-con-soc-s905-02-12-2016\/]\nDownload firmware link [URL:https:\/\/mega.nz\/#!xNkSVJoK!CY_KUix-gKUaAxecY8pREqu8Wi9WvkbSJNXhInKDzMQ]\nThis firmware solved the power-on bug!!\n\nI was excited, because when I use this firm I can power off and even power on from libreelec and the recovery toothpick method worked!!!\nUnfortunately I didn't manage to install properly libreelec to NAND using this firmware. Although "installtointernal" script works fine, I only get a blank screen on reboot. I tried with gxbb_p200_1G_100M.dtb, gxbb_p200_1G_mxq_pro_4k.dtb,gxbb_p200_1G_100M_RealtekWiFi.dtb and gxbb_p201.dtb (this last firm is for a p201 version).\nI did a lot of tests without success. I could use libreelec from SD but not from NAND.\n\nThen I found an amlogic tool that that allow me to edit images (Amlogic Customization Tool V2.0.8)\n\nSo I extracted "MXQ PRO 4K" image and copied "bootloader.partition", "ddr.usb" and "uboot.usb" from this last to the original nexbox image.\n\nThen I burnt it using a home-made USB male to male cable to my box and It worked. I could go into recovery using toothpick method. That didn't work with standard NEXBOX firmware.\n\nI managed to run libreelec fom SD. Power on from remote works well and the most important think is that libreelec installation to NAND worked.\n\nI've uploaded the uboot modified firmware:\n[cyx_MXQPro-NEXBOX_8189etv_8g1g_kodi_addons_160603_USB_uboot_mod_by_elbuit.img] [URL:https:\/\/mega.nz\/#!ahAUUIjD!S8_TZ-uVCU15-tjH-oLRUvWt0dxISYmXlJfyuGlCTfI]\n\nInstall it using male-to male USB adapter and then install libreelec.\n\nNEWS: djspawn have built a new version for NEXBOX-A95X that fix led behaviour:\n\n(Quote from djspawn)\n\n\n\n----------Working devices--------------\n-NEXBOX MXQ PRO\n-Nexbox A95X S905\n\n----------------Known issues:-------------\n-The led behaviour is the oposite, when the box is turned off the blue led light is on. (This works properly on djspawn firmware mod)\n-It takes about 20 seconds to boot libreelec (15 first seconds whithout any logo, black screen, I think that booting from SD is faster)\n-It can't power on from "SUSPEND" using remote. (you must change hdmi-cec options in libreelec input devices to prevent this).